Re: [RFC][PATCH] [1/2] 8xx platform definitions

[Vitaly Bordug <vbordug@ru.mvista.com>]

Dan Malek wrote:
> 
> On Aug 19, 2005, at 8:44 AM, Vitaly Bordug wrote:
> 
>> +#define MPC8xx_INT_FEC1        SIU_LEVEL1
>> +#define MPC8xx_INT_FEC2        SIU_LEVEL3
>> +
>> +#define MPC8xx_INT_SCC1        (CPM_IRQ_OFFSET + CPMVEC_SCC1)
>> +#define MPC8xx_INT_SCC2        (CPM_IRQ_OFFSET + CPMVEC_SCC2)
>> +#define MPC8xx_INT_SCC3        (CPM_IRQ_OFFSET + CPMVEC_SCC3)
>> +#define MPC8xx_INT_SCC4        (CPM_IRQ_OFFSET + CPMVEC_SCC4)
>> +#define MPC8xx_INT_SMC1        (CPM_IRQ_OFFSET + CPMVEC_SMC1)
>> +#define MPC8xx_INT_SMC2        (CPM_IRQ_OFFSET + CPMVEC_SMC2)
>> +
>> +/* Offset from IMMAP base address */
>> +#define MPC8xx_SCC1_OFFSET    (0xa00)
>> +#define MPC8xx_SCC1_SIZE    (0x18)
>> +#define MPC8xx_SCC2_OFFSET    (0xa20)
>> +#define MPC8xx_SCC2_SIZE    (0x18)
>> +#define MPC8xx_SCC3_OFFSET    (0xa40)
>> +#define MPC8xx_SCC3_SIZE    (0x18)
>> +#define MPC8xx_SCC4_OFFSET    (0xa60)
>> +#define MPC8xx_SCC4_SIZE    (0x18)
>> +#define MPC8xx_SMC1_OFFSET    (0xa82)
>> +#define MPC8xx_SMC1_SIZE    (0x0f)
>> +#define MPC8xx_SMC2_OFFSET    (0xa92)
>> +#define MPC8xx_SMC2_SIZE    (0x0d)
>> +#define MPC8xx_FEC1_OFFSET    (0xe00)
>> +#define MPC8xx_FEC1_SIZE    (0x88)
>> +#define MPC8xx_FEC2_OFFSET    (0x1e00)
>> +#define MPC8xx_FEC2_SIZE    (0x88)
>> +
>> +#define MPC8xx_DPARAM_SCC1_OFFSET    (0x3C00)
>> +#define MPC8xx_DPARAM_SCC1_SIZE    (0x80)
>> +#define MPC8xx_DPARAM_SCC2_OFFSET    (0x3D00)
>> +#define MPC8xx_DPARAM_SCC2_SIZE    (0x80)
>> +#define MPC8xx_DPARAM_SCC3_OFFSET    (0x3E00)
>> +#define MPC8xx_DPARAM_SCC3_SIZE    (0x80)
>> +#define MPC8xx_DPARAM_SCC4_OFFSET    (0x3F00)
>> +#define MPC8xx_DPARAM_SCC4_SIZE    (0x80)
>> +#define MPC8xx_DPARAM_SMC1_OFFSET    (0x3E80)
>> +#define MPC8xx_DPARAM_SMC1_SIZE    (0x40)
>> +#define MPC8xx_DPARAM_SMC2_OFFSET    (0x3F80)
>> +#define MPC8xx_DPARAM_SMC2_SIZE    (0x40)
> 
> 
> All of these #defines should already be in a header file somewhere,
> and if they aren't, should be in the generic CPM header file.
> Please clean this up.
> 
> Thanks.
> 
>     -- Dan
> 
> 
I am going to move interrupts to the generic CPM header file, others I 
guess may be cleanup'ed, with replace respective defines in the source 
by pure numbers (as was done previously for PQ2 platform stuff).


-- 
Sincerely,
Vitaly