From: "Antonino A. Daplas" <adaplas@gmail.com>
To: Andrew Morton <akpm@osdl.org>
Cc: Linux Fbdev development list <linux-fbdev-devel@lists.sourceforge.net>
Subject: [PATCH 1/9] fbdev: Resurrect hooks to get EDID from firmware
Date: Sat, 20 Aug 2005 00:32:31 +0800 [thread overview]
Message-ID: <4306099F.80500@gmail.com> (raw)
For the i386, code is already present in video.S that gets the
EDID from the video BIOS. Make this visible so drivers can also use
this data as fallback when i2c does not work.
To ensure that the EDID block is returned for the primary graphics adapter
only, by check if the IORESOURCE_ROM_SHADOW flag is set.
From: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
---
arch/i386/boot/video.S | 2 +-
drivers/video/fbmon.c | 35 ++++++++++++++++++++++++++++++++++-
include/linux/fb.h | 4 +++-
3 files changed, 38 insertions(+), 3 deletions(-)
diff --git a/arch/i386/boot/video.S b/arch/i386/boot/video.S
--- a/arch/i386/boot/video.S
+++ b/arch/i386/boot/video.S
@@ -1949,7 +1949,7 @@ store_edid:
movw $0x4f15, %ax # do VBE/DDC
movw $0x01, %bx
movw $0x00, %cx
- movw $0x01, %dx
+ movw $0x00, %dx
movw $0x140, %di
int $0x10
diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -29,6 +29,7 @@
#include <linux/tty.h>
#include <linux/fb.h>
#include <linux/module.h>
+#include <video/edid.h>
#ifdef CONFIG_PPC_OF
#include <linux/pci.h>
#include <asm/prom.h>
@@ -1251,9 +1252,41 @@ int fb_validate_mode(const struct fb_var
-EINVAL : 0;
}
+#if defined(__i386__)
+#include <linux/pci.h>
+
+/*
+ * We need to ensure that the EDID block is only returned for
+ * the primary graphics adapter.
+ */
+
+const unsigned char *fb_firmware_edid(struct device *device)
+{
+ struct pci_dev *dev = NULL;
+ struct resource *res = NULL;
+ unsigned char *edid = NULL;
+
+ if (device)
+ dev = to_pci_dev(device);
+
+ if (dev)
+ res = &dev->resource[PCI_ROM_RESOURCE];
+
+ if (res && res->flags & IORESOURCE_ROM_SHADOW)
+ edid = edid_info.dummy;
+
+ return edid;
+}
+#else
+const unsigned char *fb_firmware_edid(struct device *device)
+{
+ return NULL;
+}
+#endif /* _i386_ */
+
EXPORT_SYMBOL(fb_parse_edid);
EXPORT_SYMBOL(fb_edid_to_monspecs);
-
+EXPORT_SYMBOL(fb_firmware_edid);
EXPORT_SYMBOL(fb_get_mode);
EXPORT_SYMBOL(fb_validate_mode);
EXPORT_SYMBOL(fb_destroy_modedb);
diff --git a/include/linux/fb.h b/include/linux/fb.h
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -859,7 +859,9 @@ extern int fb_get_mode(int flags, u32 va
extern int fb_validate_mode(const struct fb_var_screeninfo *var,
struct fb_info *info);
extern int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var);
-extern void fb_edid_to_monspecs(unsigned char *edid, struct fb_monspecs *specs);
+extern const unsigned char *fb_firmware_edid(struct device *device);
+extern void fb_edid_to_monspecs(unsigned char *edid,
+ struct fb_monspecs *specs);
extern void fb_destroy_modedb(struct fb_videomode *modedb);
/* drivers/video/modedb.c */
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
reply other threads:[~2005-08-20 0:31 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4306099F.80500@gmail.com \
--to=adaplas@gmail.com \
--cc=akpm@osdl.org \
--cc=linux-fbdev-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.