From: Philip Prindeville <philipp_subx@redfish-solutions.com>
To: alsa-devel@lists.sourceforge.net
Subject: Redhat packaging...
Date: Fri, 19 Aug 2005 19:58:47 -0600 [thread overview]
Message-ID: <43068E57.8090900@redfish-solutions.com> (raw)
Well, this is the packaging that Redhat uses, but not where
the CVS build goes as it stands:
[root@mail share]# rpm --query --filesbypkg alsa-utils-1.0.6-3
alsa-lib-1.0.6-8.FC3
alsa-utils /etc/dev.d/sound
alsa-utils /etc/dev.d/sound/alsa.dev
alsa-utils /sbin/alsactl
alsa-utils /usr/bin/aconnect
alsa-utils /usr/bin/alsamixer
alsa-utils /usr/bin/amidi
alsa-utils /usr/bin/amixer
alsa-utils /usr/bin/aplay
alsa-utils /usr/bin/aplaymidi
alsa-utils /usr/bin/arecord
alsa-utils /usr/bin/arecordmidi
alsa-utils /usr/bin/aseqnet
alsa-utils /usr/bin/iecset
alsa-utils /usr/bin/speaker-test
alsa-utils /usr/sbin/alsactl
alsa-utils /usr/share/doc/alsa-utils-1.0.6
alsa-utils /usr/share/doc/alsa-utils-1.0.6/COPYING
alsa-utils /usr/share/doc/alsa-utils-1.0.6/ChangeLog
alsa-utils /usr/share/doc/alsa-utils-1.0.6/README
alsa-utils /usr/share/doc/alsa-utils-1.0.6/TODO
alsa-utils /usr/share/man/man1/aconnect.1.gz
alsa-utils /usr/share/man/man1/alsactl.1.gz
alsa-utils /usr/share/man/man1/alsamixer.1.gz
alsa-utils /usr/share/man/man1/amidi.1.gz
alsa-utils /usr/share/man/man1/amixer.1.gz
alsa-utils /usr/share/man/man1/aplay.1.gz
alsa-utils /usr/share/man/man1/aplaymidi.1.gz
alsa-utils /usr/share/man/man1/arecord.1.gz
alsa-utils /usr/share/man/man1/arecordmidi.1.gz
alsa-utils /usr/share/man/man1/aseqnet.1.gz
alsa-utils /usr/share/man/man1/iecset.1.gz
alsa-lib /etc/alsa
alsa-lib /etc/alsa/alsa.conf
alsa-lib /etc/alsa/cards
alsa-lib /etc/alsa/cards/ATIIXP-MODEM.conf
alsa-lib /etc/alsa/cards/ATIIXP-SPDMA.conf
alsa-lib /etc/alsa/cards/ATIIXP.conf
alsa-lib /etc/alsa/cards/AU8810.conf
alsa-lib /etc/alsa/cards/AU8820.conf
alsa-lib /etc/alsa/cards/AU8830.conf
alsa-lib /etc/alsa/cards/Audigy.conf
alsa-lib /etc/alsa/cards/Audigy2.conf
alsa-lib /etc/alsa/cards/AudigyLS.conf
alsa-lib /etc/alsa/cards/CMI8338-SWIEC.conf
alsa-lib /etc/alsa/cards/CMI8338.conf
alsa-lib /etc/alsa/cards/CMI8738-MC6.conf
alsa-lib /etc/alsa/cards/CS46xx.conf
alsa-lib /etc/alsa/cards/EMU10K1.conf
alsa-lib /etc/alsa/cards/EMU10K1X.conf
alsa-lib /etc/alsa/cards/ENS1370.conf
alsa-lib /etc/alsa/cards/ENS1371.conf
alsa-lib /etc/alsa/cards/FM801.conf
alsa-lib /etc/alsa/cards/GUS.conf
alsa-lib /etc/alsa/cards/ICE1712.conf
alsa-lib /etc/alsa/cards/ICE1724.conf
alsa-lib /etc/alsa/cards/ICH-MODEM.conf
alsa-lib /etc/alsa/cards/ICH.conf
alsa-lib /etc/alsa/cards/NFORCE.conf
alsa-lib /etc/alsa/cards/RME9636.conf
alsa-lib /etc/alsa/cards/RME9652.conf
alsa-lib /etc/alsa/cards/SI7018
alsa-lib /etc/alsa/cards/SI7018.conf
alsa-lib /etc/alsa/cards/SI7018/sndoc-mixer.alisp
alsa-lib /etc/alsa/cards/SI7018/sndop-mixer.alisp
alsa-lib /etc/alsa/cards/TRID4DWAVENX.conf
alsa-lib /etc/alsa/cards/VIA686A.conf
alsa-lib /etc/alsa/cards/VIA8233.conf
alsa-lib /etc/alsa/cards/VIA8233A.conf
alsa-lib /etc/alsa/cards/VX222.conf
alsa-lib /etc/alsa/cards/VXPocket.conf
alsa-lib /etc/alsa/cards/VXPocket440.conf
alsa-lib /etc/alsa/cards/YMF744.conf
alsa-lib /etc/alsa/cards/aliases.alisp
alsa-lib /etc/alsa/cards/aliases.conf
alsa-lib /etc/alsa/pcm
alsa-lib /etc/alsa/pcm/center_lfe.conf
alsa-lib /etc/alsa/pcm/front.conf
alsa-lib /etc/alsa/pcm/iec958.conf
alsa-lib /etc/alsa/pcm/modem.conf
alsa-lib /etc/alsa/pcm/rear.conf
alsa-lib /etc/alsa/pcm/side.conf
alsa-lib /etc/alsa/pcm/surround40.conf
alsa-lib /etc/alsa/pcm/surround41.conf
alsa-lib /etc/alsa/pcm/surround50.conf
alsa-lib /etc/alsa/pcm/surround51.conf
alsa-lib /etc/alsa/pcm/surround71.conf
alsa-lib /etc/alsa/sndo-mixer.alisp
alsa-lib /lib64/libasound.so.2
alsa-lib /lib64/libasound.so.2.0.0
alsa-lib /usr/bin/alsalisp
alsa-lib /usr/bin/aserver
alsa-lib /usr/share/doc/alsa-lib-1.0.6
alsa-lib /usr/share/doc/alsa-lib-1.0.6/COPYING
alsa-lib /usr/share/doc/alsa-lib-1.0.6/ChangeLog
alsa-lib /usr/share/doc/alsa-lib-1.0.6/TODO
alsa-lib /usr/share/doc/alsa-lib-1.0.6/asoundrc.txt
[root@mail share]#
what do I need to tweak to have things go into the right places
(i.e. with a command-line build, "make install LIBDIR=..." etc).
-Philip
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
next reply other threads:[~2005-08-20 1:58 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-20 1:58 Philip Prindeville [this message]
2005-08-20 2:20 ` Redhat packaging Lee Revell
2005-08-20 17:16 ` Philip Prindeville
2005-08-20 18:27 ` Lee Revell
2005-08-20 3:09 ` Lee Revell
2005-08-22 12:17 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43068E57.8090900@redfish-solutions.com \
--to=philipp_subx@redfish-solutions.com \
--cc=alsa-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.