From: Michael Marineau <marineam@engr.orst.edu>
To: Andrew Morton <akpm@osdl.org>, benh@kernel.crashing.org
Cc: Pavel Machek <pavel@ucw.cz>, linux-kernel@vger.kernel.org
Subject: [PATCH 1/3] Generic acpi vgapost
Date: Sat, 27 Aug 2005 18:27:47 -0700 [thread overview]
Message-ID: <43111313.8000800@engr.orst.edu> (raw)
In-Reply-To: <43111298.80507@engr.orst.edu>
[-- Attachment #1.1: Type: text/plain, Size: 219 bytes --]
Generic function to post the video bios.
Based directly on the original patch by Ole Rohne.
Signed-off-by: Michael Marineau <marineam@engr.orst.edu>
--
Michael Marineau
marineam@engr.orst.edu
Oregon State University
[-- Attachment #1.2: acpi-vgapost.patch --]
[-- Type: text/x-patch, Size: 3466 bytes --]
Index: linux-2.6.13-rc7/arch/i386/kernel/acpi/sleep.c
===================================================================
--- linux-2.6.13-rc7.orig/arch/i386/kernel/acpi/sleep.c
+++ linux-2.6.13-rc7/arch/i386/kernel/acpi/sleep.c
@@ -5,6 +5,7 @@
* Copyright (C) 2001-2003 Pavel Machek <pavel@suse.cz>
*/
+#include <linux/module.h>
#include <linux/acpi.h>
#include <linux/bootmem.h>
#include <linux/dmi.h>
@@ -56,6 +57,34 @@ void acpi_restore_state_mem (void)
zap_low_mappings();
}
+/*
+ * acpi_vgapost
+ */
+
+extern void do_vgapost_lowlevel (unsigned long);
+
+void acpi_vgapost (unsigned long slot)
+{
+ unsigned long flags, saved_video_flags = acpi_video_flags;
+
+ acpi_video_flags = (slot & 0xffff) << 16 | 1;
+
+ /* Map low memory and copy information */
+ init_low_mapping(swapper_pg_dir, USER_PTRS_PER_PGD);
+ memcpy((void *) acpi_wakeup_address, &wakeup_start, &wakeup_end - &wakeup_start);
+ acpi_copy_wakeup_routine(acpi_wakeup_address);
+
+ /* Tunnel thru real mode */
+ local_irq_save(flags);
+ do_vgapost_lowlevel(acpi_wakeup_address);
+ local_irq_restore(flags);
+
+ /* Restore mapping etc */
+ zap_low_mappings();
+ acpi_video_flags = saved_video_flags;
+}
+EXPORT_SYMBOL (acpi_vgapost);
+
/**
* acpi_reserve_bootmem - do _very_ early ACPI initialisation
*
Index: linux-2.6.13-rc7/arch/i386/kernel/acpi/wakeup.S
===================================================================
--- linux-2.6.13-rc7.orig/arch/i386/kernel/acpi/wakeup.S
+++ linux-2.6.13-rc7/arch/i386/kernel/acpi/wakeup.S
@@ -171,6 +171,32 @@ check_vesa:
_setbad: jmp setbad
+#
+# Real mode switch - verbatim from reboot.c
+#
+go_real:
+ movl %cr0, %eax
+ andl $0x00000011, %eax
+ orl $0x60000000, %eax
+ movl %eax, %cr0
+ movl %eax, %cr3
+ movl %cr0, %ebx
+ andl $0x60000000, %ebx
+ jz 1f
+ wbinvd
+1: andb $0x10, %al
+ movl %eax, %cr0
+go_real_jmp: .byte 0xea
+go_real_jmp_off: .word 0x0000
+go_real_jmp_seg: .word 0x0000
+#
+# Real mode descriptor table
+#
+ .align 8
+go_real_desc: .quad 0x0000000000000000
+go_real_cseg: .quad 0x00009a000000ffff
+go_real_dseg: .quad 0x000092000000ffff
+
.code32
ALIGN
@@ -310,6 +336,59 @@ ENTRY(do_suspend_lowlevel_s4bios)
call acpi_enter_sleep_state_s4bios
ret
+ENTRY(do_vgapost_lowlevel)
+ # Convert target offset to physical address
+ movl %eax, %ecx
+ subl $__PAGE_OFFSET, %ecx
+ # Fixup GDT pointer
+ movl %ecx, %edx
+ addl $go_real_desc - wakeup_start, %edx
+ movl %edx, go_real_gdt + 2
+ # Fixup 16-bit CS descriptor
+ movl %ecx, %edx
+ movw %dx, go_real_cseg - wakeup_start + 2 (%eax)
+ shrl $16, %edx
+ movb %dl, go_real_cseg - wakeup_start + 4 (%eax)
+ movb %dh, go_real_cseg - wakeup_start + 7 (%eax)
+ # Fixup 16-bit jump
+ movl %ecx, %edx
+ shrl $4, %edx
+ movw %dx, go_real_jmp_seg - wakeup_start (%eax)
+ # Save state and registers
+ call save_processor_state
+ call save_registers
+ # Reload page table with low mapping
+ movl $swapper_pg_dir-__PAGE_OFFSET, %eax
+ movl %eax, %cr3
+ # Load IDTR and GDTR for real mode
+ lidt go_real_idt
+ lgdt go_real_gdt
+ # Load DS & al
+ movl $0x0010, %eax
+ movl %eax, %ss
+ movl %eax, %ds
+ movl %eax, %es
+ movl %eax, %fs
+ movl %eax, %gs
+ # Load CS
+ call $0x0008, $(go_real - wakeup_start)
+ # Phony return code
+ call restore_registers
+ call restore_processor_state
+ ret
+
+ .align 4
+ .word 0
+go_real_idt:
+ .word 0x3ff
+ .long 0
+
+ .align 4
+ .word 0
+go_real_gdt:
+ .word 3*8-1
+ .long 0
+
ALIGN
# saved registers
saved_gdt: .long 0,0
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 256 bytes --]
next prev parent reply other threads:[~2005-08-28 1:27 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-28 1:25 [PATCH 0/3] Radeon acpi vgapost Michael Marineau
2005-08-28 1:27 ` Michael Marineau [this message]
2005-08-28 8:07 ` [PATCH 1/3] Generic " Pavel Machek
2005-08-28 20:56 ` Jiri Slaby
2005-08-30 10:51 ` Dave Airlie
2005-08-28 1:31 ` [PATCH 2/3] Radeon " Michael Marineau
2005-08-28 1:34 ` [PATCH 3/3] Documentation update for radeonfb Michael Marineau
2005-08-28 5:12 ` [PATCH 0/3] Radeon acpi vgapost Nishanth Aravamudan
2005-08-28 7:44 ` Michael Marineau
2005-08-28 18:08 ` Nishanth Aravamudan
2005-08-28 6:54 ` Manuel Lauss
2005-08-28 7:31 ` [PATCH 4/3] Radeon acpi vgapost only Rv250 (M9) Michael Marineau
2005-08-28 12:50 ` [PATCH 0/3] Radeon acpi vgapost Matthew Garrett
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43111313.8000800@engr.orst.edu \
--to=marineam@engr.orst.edu \
--cc=akpm@osdl.org \
--cc=benh@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pavel@ucw.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.