From: Daniel Drake <dsd@gentoo.org>
To: prism54-private@prism54.org
Cc: netdev@vger.kernel.org, netfilter-devel@lists.netfilter.org
Subject: prism54 vs netfilter problem? Badness in local_bh_enable at kernel/softirq.c:140
Date: Wed, 31 Aug 2005 12:53:23 +0100 [thread overview]
Message-ID: <43159A33.8010600@gentoo.org> (raw)
Hi,
A gentoo user reported these messages on boot:
eth0: resetting device...
eth0: uploading firmware...
eth0: firmware version: 1.0.4.3
eth0: firmware upload complete
eth0: interface reset complete
spurious 8259A interrupt: IRQ7.
eth0: islpci_close ()
eth0: resetting device...
eth0: uploading firmware...
eth0: firmware version: 1.0.4.3
eth0: firmware upload complete
eth0: interface reset complete
Badness in local_bh_enable at kernel/softirq.c:140
[<c0125f9f>] local_bh_enable+0x8f/0xa0
[<c03a71b9>] destroy_conntrack+0xd9/0xf0
[<c0357d8a>] __kfree_skb+0x7a/0xf0
[<c79181fa>] islpci_eth_transmit+0x15a/0x380 [prism54]
[<c035d692>] dev_queue_xmit_nit+0xd2/0x140
[<c036b04e>] qdisc_restart+0x15e/0x200
[<c035dabf>] dev_queue_xmit+0x1cf/0x270
[<c0363b23>] neigh_resolve_output+0xd3/0x1d0
[<c03636f6>] neigh_update+0x2a6/0x350
[<c0397963>] arp_process+0x1c3/0x570
[<c036902e>] nf_hook_slow+0x7e/0x140
[<c03977a0>] arp_process+0x0/0x570
[<c0397e12>] arp_rcv+0x102/0x180
[<c03977a0>] arp_process+0x0/0x570
[<c035e0a8>] netif_receive_skb+0x148/0x1d0
[<c035e1c9>] process_backlog+0x99/0x130
[<c035e2e1>] net_rx_action+0x81/0x110
[<c0125eb6>] __do_softirq+0xd6/0xf0
[<c0125f05>] do_softirq+0x35/0x40
[<c0125ff5>] irq_exit+0x45/0x50
[<c0105aee>] do_IRQ+0x1e/0x30
[<c0103d72>] common_interrupt+0x1a/0x20
[<c0277a26>] acpi_processor_idle+0x126/0x270
[<c0101110>] cpu_idle+0x70/0x80
[<c04f6959>] start_kernel+0x169/0x190
[<c04f6370>] unknown_bootoption+0x0/0x1d0
Badness in local_bh_enable at kernel/softirq.c:140
[<c0125f9f>] local_bh_enable+0x8f/0xa0
[<c03a717a>] destroy_conntrack+0x9a/0xf0
[<c0357d8a>] __kfree_skb+0x7a/0xf0
[<c79181fa>] islpci_eth_transmit+0x15a/0x380 [prism54]
[<c035d692>] dev_queue_xmit_nit+0xd2/0x140
[<c036b04e>] qdisc_restart+0x15e/0x200
[<c035dabf>] dev_queue_xmit+0x1cf/0x270
[<c0363b23>] neigh_resolve_output+0xd3/0x1d0
[<c03636f6>] neigh_update+0x2a6/0x350
[<c0397963>] arp_process+0x1c3/0x570
[<c036902e>] nf_hook_slow+0x7e/0x140
[<c03977a0>] arp_process+0x0/0x570
[<c0397e12>] arp_rcv+0x102/0x180
[<c03977a0>] arp_process+0x0/0x570
[<c035e0a8>] netif_receive_skb+0x148/0x1d0
[<c035e1c9>] process_backlog+0x99/0x130
[<c035e2e1>] net_rx_action+0x81/0x110
[<c0125eb6>] __do_softirq+0xd6/0xf0
[<c0125f05>] do_softirq+0x35/0x40
[<c0125ff5>] irq_exit+0x45/0x50
[<c0105aee>] do_IRQ+0x1e/0x30
[<c0103d72>] common_interrupt+0x1a/0x20
[<c0277a26>] acpi_processor_idle+0x126/0x270
[<c0101110>] cpu_idle+0x70/0x80
[<c04f6959>] start_kernel+0x169/0x190
[<c04f6370>] unknown_bootoption+0x0/0x1d0
This isn't a reproducible problem and apparently everything worked fine even
after these messages had appeared. Just thought I should point out that
something isn't quite right somewhere.
The Gentoo bug report is here:
http://bugs.gentoo.org/show_bug.cgi?id=103803
Something similar has been reported previously:
http://prism54.org/pipermail/prism54-users/2003-November/000083.html
http://prism54.org/pipermail/prism54-users/2003-November/000047.html
Hope this is useful.
Daniel
next reply other threads:[~2005-08-31 11:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-31 11:53 Daniel Drake [this message]
2005-08-31 16:10 ` prism54 vs netfilter problem? Badness in local_bh_enable at kernel/softirq.c:140 Patrick McHardy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43159A33.8010600@gentoo.org \
--to=dsd@gentoo.org \
--cc=netdev@vger.kernel.org \
--cc=netfilter-devel@lists.netfilter.org \
--cc=prism54-private@prism54.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.