From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from linserv001.aimsys.nl (a80-127-156-242.adsl.xs4all.nl [80.127.156.242]) (using TLSv1 with cipher EDH-RSA-DES-CBC3-SHA (168/168 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTP id 69167681C4 for ; Wed, 7 Sep 2005 00:17:12 +1000 (EST) Message-ID: <431DA0D5.508@aimsys.nl> Date: Tue, 06 Sep 2005 15:59:49 +0200 From: Jaap-Jan Boor MIME-Version: 1.0 To: Alex Zeffertt References: <20050906133122.225a0922.ajz@cambridgebroadband.com> <431D8F5B.9050803@ru.mvista.com> <20050906144845.1e603c72.ajz@cambridgebroadband.com> In-Reply-To: <20050906144845.1e603c72.ajz@cambridgebroadband.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Cc: linuxppc-embedded@ozlabs.org Subject: Re: PCI on MPC827x List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , We use it with 2.4.25. I think you should take a look at Wolfang Denx' 2.4 kernel Jaap-Jan Alex Zeffertt wrote: >On Tue, 06 Sep 2005 16:45:15 +0400 >Vitaly Bordug wrote: > > > >>Alex Zeffertt wrote: >> >> >>>Hi list, >>> >>>Does the linuxppc kernel support PCI on PowerQUICC II chips? If so, in which patch/release was >>>it added? >>> >>> >>> >>The PCI bridge for 8272ADS has been added in 2.6.12-rc6. This stuff >>should work on PQ2FADS as well. >> >> > >Thanks Vitaly. Unfortunately we're using linux-2.4.25. > >Has anybody backported the PCI bridge to 2.4? If not, do you think it's a lot of work? > >Alex >_______________________________________________ >Linuxppc-embedded mailing list >Linuxppc-embedded@ozlabs.org >https://ozlabs.org/mailman/listinfo/linuxppc-embedded > > -- J.G.J. Boor Anton Philipsweg 1 Software Engineer 1223 KZ Hilversum AimSys bv tel. +31 35 689 1941 Postbus 2194, 1200 CD Hilversum mailto:jjboor@aimsys.nl