From: Luben Tuikov <luben_tuikov@adaptec.com>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
SCSI Mailing List <linux-scsi@vger.kernel.org>
Subject: [ANNOUNCE 1/2] Serial Attached SCSI (SAS) support for the Linux kernel
Date: Fri, 09 Sep 2005 15:30:43 -0400 [thread overview]
Message-ID: <4321E2E3.30006@adaptec.com> (raw)
This email shows an example of two domains.
The first domain has only two devices: the SAS initiator
and a SAS end device (a disk).
The second domain has expanders, SAS disks, a SATA II disk
and a SATAPI disk.
A succinct and full listings of the sysfs tree are shown
using the tree(1) program.
Sample configuration
--------------------
Directly attached devices, cascaded expanders and
wide ports
1. SAS disk on HA phy 0, forming a narrow port, port 0.
2. Expander on HA phys 4, 5, 6, and 7, forming
a wide port, port 1.
3. Port 0, narrow, of phy 0, is formed between
the host adapter and a SAS end device with SAS port identifier
(aua/aka, SAS address) 500000e000031c12. This device
has a single LU, with LUN 0, which is a disk device.
4. Port 1, wide, of phys 4, 5, 6 and 7, is formed between
the Host adapter's phys 4-7 and the expander with SAS
address 50001c1716010600, Expander A.
5. Expander A, 50001c1716010600, has 4 devices attached to it:
- An expander with SAS address 50001c1071609c00,
expander B (using a 2 link wide port, see below).
- A SATA II disk, 50001c1716010603, using the expanders'
STP/SATA bridge.
- An SES device, LUN 0 of 50001c171601060d.
- And a SAS disk, LUN 0 of 5000c50000513329.
6. Expander B, 50001c1071609c00, has 3 devices attached to it:
- A SATAPI device, 50001c1071609c02, using the expander's
STP/SATA bridge.
- A SAS disk, LUN 0 of 5000c50000102a65.
- And an expander, 5005076a000001e0, expander C,
(using a 2 link wide port, see below).
7. Expander C, 5005076a000001e0, has 3 devices attached to it:
- A SAS disk, LUN 0 of 5000c50000513385.
- An SES device, LUN 0 of 5005076a000001ed.
- A SAS disk, LUN 0 of 5c50000000409c11.
Succinct listing of the tree
----------------------------
tree -d /sys/devices/pci0000\:01/0000\:01\:04.0/host11/sas/ha
/sys/devices/pci0000:01/0000:01:04.0/host11/sas/ha
|-- phys
| |-- 0
| | `-- port -> ../../../../../../../../devices/pci0000:01/0000:01:04.0/host11/sas/ha/ports/0
| |-- 1
| |-- 2
| |-- 3
| |-- 4
| | `-- port -> ../../../../../../../../devices/pci0000:01/0000:01:04.0/host11/sas/ha/ports/1
| |-- 5
| | `-- port -> ../../../../../../../../devices/pci0000:01/0000:01:04.0/host11/sas/ha/ports/1
| |-- 6
| | `-- port -> ../../../../../../../../devices/pci0000:01/0000:01:04.0/host11/sas/ha/ports/1
| `-- 7
| `-- port -> ../../../../../../../../devices/pci0000:01/0000:01:04.0/host11/sas/ha/ports/1
`-- ports
|-- 0
| |-- domain
| | `-- 500000e000031c12
| | `-- LUNS
| | `-- 0000000000000000
| `-- phys
| `-- 0 -> ../../../../../../../../../devices/pci0000:01/0000:01:04.0/host11/sas/ha/phys/0
`-- 1
|-- domain
| `-- 50001c1716010600
| |-- 50001c1071609c00
| | |-- 50001c1071609c02
| | |-- 5000c50000102a65
| | | `-- LUNS
| | | `-- 0000000000000000
| | `-- 5005076a000001e0
| | |-- 5000c50000513385
| | | `-- LUNS
| | | `-- 0000000000000000
| | |-- 5005076a000001ed
| | | `-- LUNS
| | | `-- 0000000000000000
| | `-- 5c50000000409c11
| | `-- LUNS
| | `-- 0000000000000000
| |-- 50001c1716010603
| |-- 50001c171601060d
| | `-- LUNS
| | `-- 0000000000000000
| `-- 5000c50000513329
| `-- LUNS
| `-- 0000000000000000
`-- phys
|-- 4 -> ../../../../../../../../../devices/pci0000:01/0000:01:04.0/host11/sas/ha/phys/4
|-- 5 -> ../../../../../../../../../devices/pci0000:01/0000:01:04.0/host11/sas/ha/phys/5
|-- 6 -> ../../../../../../../../../devices/pci0000:01/0000:01:04.0/host11/sas/ha/phys/6
`-- 7 -> ../../../../../../../../../devices/pci0000:01/0000:01:04.0/host11/sas/ha/phys/7
52 directories
Full listing of the tree
------------------------
tree /sys/devices/pci0000\:01/0000\:01\:04.0/host11/sas/ha
/sys/devices/pci0000:01/0000:01:04.0/host11/sas/ha
|-- device_name
|-- ha_name
|-- phys
| |-- 0
| | |-- class
| | |-- enabled
| | |-- id
| | |-- iproto
| | |-- linkrate
| | |-- oob_mode
| | |-- port -> ../../../../../../../../devices/pci0000:01/0000:01:04.0/host11/sas/ha/ports/0
| | |-- role
| | |-- sas_addr
| | |-- tproto
| | `-- type
| |-- 1
| | |-- class
| | |-- enabled
| | |-- id
| | |-- iproto
| | |-- linkrate
| | |-- oob_mode
| | |-- role
| | |-- sas_addr
| | |-- tproto
| | `-- type
| |-- 2
| | |-- class
| | |-- enabled
| | |-- id
| | |-- iproto
| | |-- linkrate
| | |-- oob_mode
| | |-- role
| | |-- sas_addr
| | |-- tproto
| | `-- type
| |-- 3
| | |-- class
| | |-- enabled
| | |-- id
| | |-- iproto
| | |-- linkrate
| | |-- oob_mode
| | |-- role
| | |-- sas_addr
| | |-- tproto
| | `-- type
| |-- 4
| | |-- class
| | |-- enabled
| | |-- id
| | |-- iproto
| | |-- linkrate
| | |-- oob_mode
| | |-- port -> ../../../../../../../../devices/pci0000:01/0000:01:04.0/host11/sas/ha/ports/1
| | |-- role
| | |-- sas_addr
| | |-- tproto
| | `-- type
| |-- 5
| | |-- class
| | |-- enabled
| | |-- id
| | |-- iproto
| | |-- linkrate
| | |-- oob_mode
| | |-- port -> ../../../../../../../../devices/pci0000:01/0000:01:04.0/host11/sas/ha/ports/1
| | |-- role
| | |-- sas_addr
| | |-- tproto
| | `-- type
| |-- 6
| | |-- class
| | |-- enabled
| | |-- id
| | |-- iproto
| | |-- linkrate
| | |-- oob_mode
| | |-- port -> ../../../../../../../../devices/pci0000:01/0000:01:04.0/host11/sas/ha/ports/1
| | |-- role
| | |-- sas_addr
| | |-- tproto
| | `-- type
| `-- 7
| |-- class
| |-- enabled
| |-- id
| |-- iproto
| |-- linkrate
| |-- oob_mode
| |-- port -> ../../../../../../../../devices/pci0000:01/0000:01:04.0/host11/sas/ha/ports/1
| |-- role
| |-- sas_addr
| |-- tproto
| `-- type
`-- ports
|-- 0
| |-- attached_port_identifier
| |-- class
| |-- domain
| | `-- 500000e000031c12
| | |-- LUNS
| | | `-- 0000000000000000
| | | |-- channel
| | | |-- id
| | | |-- inquiry_data
| | | |-- lun
| | | `-- task_management
| | |-- dev_type
| | |-- iproto
| | |-- iresp_timeout
| | |-- itnl_timeout
| | |-- linkrate
| | |-- max_linkrate
| | |-- min_linkrate
| | |-- pathways
| | |-- ready_led_meaning
| | |-- rl_wlun
| | |-- sas_addr
| | `-- tproto
| |-- id
| |-- iproto
| |-- oob_mode
| |-- phys
| | `-- 0 -> ../../../../../../../../../devices/pci0000:01/0000:01:04.0/host11/sas/ha/phys/0
| |-- port_identifier
| `-- tproto
`-- 1
|-- attached_port_identifier
|-- class
|-- domain
| `-- 50001c1716010600
| |-- 50001c1071609c00
| | |-- 50001c1071609c02
| | | |-- command_set
| | | |-- dev_type
| | | |-- firmware_rev
| | | |-- identify_device
| | | |-- identify_packet_device
| | | |-- iproto
| | | |-- linkrate
| | | |-- max_linkrate
| | | |-- min_linkrate
| | | |-- model_number
| | | |-- port_no
| | | |-- report_phy_sata_resp
| | | |-- sas_addr
| | | |-- serial_number
| | | `-- tproto
| | |-- 5000c50000102a65
| | | |-- LUNS
| | | | `-- 0000000000000000
| | | | |-- channel
| | | | |-- id
| | | | |-- inquiry_data
| | | | |-- lun
| | | | `-- task_management
| | | |-- dev_type
| | | |-- iproto
| | | |-- iresp_timeout
| | | |-- itnl_timeout
| | | |-- linkrate
| | | |-- max_linkrate
| | | |-- min_linkrate
| | | |-- pathways
| | | |-- ready_led_meaning
| | | |-- rl_wlun
| | | |-- sas_addr
| | | `-- tproto
| | |-- 5005076a000001e0
| | | |-- 5000c50000513385
| | | | |-- LUNS
| | | | | `-- 0000000000000000
| | | | | |-- channel
| | | | | |-- id
| | | | | |-- inquiry_data
| | | | | |-- lun
| | | | | `-- task_management
| | | | |-- dev_type
| | | | |-- iproto
| | | | |-- iresp_timeout
| | | | |-- itnl_timeout
| | | | |-- linkrate
| | | | |-- max_linkrate
| | | | |-- min_linkrate
| | | | |-- pathways
| | | | |-- ready_led_meaning
| | | | |-- rl_wlun
| | | | |-- sas_addr
| | | | `-- tproto
| | | |-- 5005076a000001ed
| | | | |-- LUNS
| | | | | `-- 0000000000000000
| | | | | |-- channel
| | | | | |-- id
| | | | | |-- inquiry_data
| | | | | |-- lun
| | | | | `-- task_management
| | | | |-- dev_type
| | | | |-- iproto
| | | | |-- iresp_timeout
| | | | |-- itnl_timeout
| | | | |-- linkrate
| | | | |-- max_linkrate
| | | | |-- min_linkrate
| | | | |-- pathways
| | | | |-- ready_led_meaning
| | | | |-- rl_wlun
| | | | |-- sas_addr
| | | | `-- tproto
| | | |-- 5c50000000409c11
| | | | |-- LUNS
| | | | | `-- 0000000000000000
| | | | | |-- channel
| | | | | |-- id
| | | | | |-- inquiry_data
| | | | | |-- lun
| | | | | `-- task_management
| | | | |-- dev_type
| | | | |-- iproto
| | | | |-- iresp_timeout
| | | | |-- itnl_timeout
| | | | |-- linkrate
| | | | |-- max_linkrate
| | | | |-- min_linkrate
| | | | |-- pathways
| | | | |-- ready_led_meaning
| | | | |-- rl_wlun
| | | | |-- sas_addr
| | | | `-- tproto
| | | |-- change_count
| | | |-- component_id
| | | |-- component_revision_id
| | | |-- component_vendor_id
| | | |-- conf_route_table
| | | |-- configuring
| | | |-- dev_type
| | | |-- enclosure_logical_id
| | | |-- iproto
| | | |-- linkrate
| | | |-- max_linkrate
| | | |-- max_route_indexes
| | | |-- min_linkrate
| | | |-- num_phys
| | | |-- pathways
| | | |-- product_id
| | | |-- product_rev
| | | |-- sas_addr
| | | |-- smp_portal
| | | |-- tproto
| | | `-- vendor_id
| | |-- change_count
| | |-- component_id
| | |-- component_revision_id
| | |-- component_vendor_id
| | |-- conf_route_table
| | |-- configuring
| | |-- dev_type
| | |-- enclosure_logical_id
| | |-- iproto
| | |-- linkrate
| | |-- max_linkrate
| | |-- max_route_indexes
| | |-- min_linkrate
| | |-- num_phys
| | |-- pathways
| | |-- product_id
| | |-- product_rev
| | |-- sas_addr
| | |-- smp_portal
| | |-- tproto
| | `-- vendor_id
| |-- 50001c1716010603
| | |-- command_set
| | |-- dev_type
| | |-- firmware_rev
| | |-- identify_device
| | |-- identify_packet_device
| | |-- iproto
| | |-- linkrate
| | |-- max_linkrate
| | |-- min_linkrate
| | |-- model_number
| | |-- port_no
| | |-- report_phy_sata_resp
| | |-- sas_addr
| | |-- serial_number
| | `-- tproto
| |-- 50001c171601060d
| | |-- LUNS
| | | `-- 0000000000000000
| | | |-- channel
| | | |-- id
| | | |-- inquiry_data
| | | |-- lun
| | | `-- task_management
| | |-- dev_type
| | |-- iproto
| | |-- iresp_timeout
| | |-- itnl_timeout
| | |-- linkrate
| | |-- max_linkrate
| | |-- min_linkrate
| | |-- pathways
| | |-- ready_led_meaning
| | |-- rl_wlun
| | |-- sas_addr
| | `-- tproto
| |-- 5000c50000513329
| | |-- LUNS
| | | `-- 0000000000000000
| | | |-- channel
| | | |-- id
| | | |-- inquiry_data
| | | |-- lun
| | | `-- task_management
| | |-- dev_type
| | |-- iproto
| | |-- iresp_timeout
| | |-- itnl_timeout
| | |-- linkrate
| | |-- max_linkrate
| | |-- min_linkrate
| | |-- pathways
| | |-- ready_led_meaning
| | |-- rl_wlun
| | |-- sas_addr
| | `-- tproto
| |-- change_count
| |-- component_id
| |-- component_revision_id
| |-- component_vendor_id
| |-- conf_route_table
| |-- configuring
| |-- dev_type
| |-- enclosure_logical_id
| |-- iproto
| |-- linkrate
| |-- max_linkrate
| |-- max_route_indexes
| |-- min_linkrate
| |-- num_phys
| |-- pathways
| |-- product_id
| |-- product_rev
| |-- sas_addr
| |-- smp_portal
| |-- tproto
| `-- vendor_id
|-- id
|-- iproto
|-- oob_mode
|-- phys
| |-- 4 -> ../../../../../../../../../devices/pci0000:01/0000:01:04.0/host11/sas/ha/phys/4
| |-- 5 -> ../../../../../../../../../devices/pci0000:01/0000:01:04.0/host11/sas/ha/phys/5
| |-- 6 -> ../../../../../../../../../devices/pci0000:01/0000:01:04.0/host11/sas/ha/phys/6
| `-- 7 -> ../../../../../../../../../devices/pci0000:01/0000:01:04.0/host11/sas/ha/phys/7
|-- port_identifier
`-- tproto
52 directories, 308 files
reply other threads:[~2005-09-09 19:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4321E2E3.30006@adaptec.com \
--to=luben_tuikov@adaptec.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.