From: Luben Tuikov <luben_tuikov@adaptec.com>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
SCSI Mailing List <linux-scsi@vger.kernel.org>
Subject: [PATCH 2.6.13 15/20] aic94xx: aic94x_sds.c Shared Data Structures and memory
Date: Fri, 09 Sep 2005 15:35:59 -0400 [thread overview]
Message-ID: <4321E41F.20900@adaptec.com> (raw)
Signed-off-by: Luben Tuikov <luben_tuikov@adaptec.com>
diff -X linux-2.6.13/Documentation/dontdiff -Naur linux-2.6.13-orig/drivers/scsi/aic94xx/aic94xx_sds.c linux-2.6.13/drivers/scsi/aic94xx/aic94xx_sds.c
--- linux-2.6.13-orig/drivers/scsi/aic94xx/aic94xx_sds.c 1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.13/drivers/scsi/aic94xx/aic94xx_sds.c 2005-09-09 11:21:23.000000000 -0400
@@ -0,0 +1,964 @@
+/*
+ * Aic94xx SAS/SATA driver access to shared data structures and memory
+ * maps.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * $Id: //depot/aic94xx/aic94xx_sds.c#34 $
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "aic94xx.h"
+#include "aic94xx_reg.h"
+
+/* ---------- OCM stuff ---------- */
+
+struct asd_ocm_dir_ent {
+ u8 type;
+ u8 offs[3];
+ u8 _r1;
+ u8 size[3];
+} __attribute__ ((packed));
+
+struct asd_ocm_dir {
+ char sig[2];
+ u8 _r1[2];
+ u8 major; /* 0 */
+ u8 minor; /* 0 */
+ u8 _r2;
+ u8 num_de;
+ struct asd_ocm_dir_ent entry[15];
+} __attribute__ ((packed));
+
+struct asd_bios_chim_struct {
+ char sig[4];
+ u8 major; /* 1 */
+ u8 minor; /* 0 */
+ u8 bios_major;
+ u8 bios_minor;
+ __le32 bios_build;
+ u8 flags;
+ u8 pci_slot;
+ __le16 ue_num;
+ __le16 ue_size;
+ u8 _r[14];
+ /* The unit element array is right here.
+ */
+} __attribute__ ((packed));
+
+/**
+ * asd_read_ocm_seg - read an on chip memory (OCM) segment
+ * @asd_ha: pointer to the host adapter structure
+ * @buffer: where to write the read data
+ * @offs: offset into OCM where to read from
+ * @size: how many bytes to read
+ *
+ * Return the number of bytes not read. Return 0 on success.
+ */
+static int asd_read_ocm_seg(struct asd_ha_struct *asd_ha, void *buffer,
+ u32 offs, int size)
+{
+ u8 *p = buffer;
+ if (unlikely(asd_ha->iospace))
+ asd_read_reg_string(asd_ha, buffer, offs+OCM_BASE_ADDR, size);
+ else {
+ for ( ; size > 0; size--, offs++, p++)
+ *p = asd_read_ocm_byte(asd_ha, offs);
+ }
+ return size;
+}
+
+static int asd_read_ocm_dir(struct asd_ha_struct *asd_ha,
+ struct asd_ocm_dir *dir, u32 offs)
+{
+ int err = asd_read_ocm_seg(asd_ha, (void *)dir, offs, sizeof(*dir));
+ if (err) {
+ ASD_DPRINTK("couldn't read ocm segment\n");
+ return err;
+ }
+ if (dir->sig[0] != 'M' || dir->sig[1] != 'O') {
+ ASD_DPRINTK("no valid dir signature(%c%c) at start of OCM\n",
+ dir->sig[0], dir->sig[1]);
+ return -ENOENT;
+ }
+ if (dir->major != 0) {
+ asd_printk("unsupported major version of ocm dir:0x%x\n",
+ dir->major);
+ return -ENOENT;
+ }
+ dir->num_de &= 0xf;
+ return 0;
+}
+
+#define THREE_TO_NUM(X) ((X)[0] | ((X)[1] << 8) | ((X)[2] << 16))
+
+static int asd_find_dir_entry(struct asd_ocm_dir *dir, u8 type,
+ u32 *offs, u32 *size)
+{
+ int i;
+ struct asd_ocm_dir_ent *ent;
+
+ for (i = 0; i < dir->num_de; i++) {
+ if (dir->entry[i].type == type)
+ break;
+ }
+ if (i >= dir->num_de)
+ return -ENOENT;
+ ent = &dir->entry[i];
+ *offs = (u32) THREE_TO_NUM(ent->offs);
+ *size = (u32) THREE_TO_NUM(ent->size);
+ return 0;
+}
+
+#define OCM_BIOS_CHIM_DE 2
+#define BC_BIOS_PRESENT 1
+
+static int asd_get_bios_chim(struct asd_ha_struct *asd_ha,
+ struct asd_ocm_dir *dir)
+{
+ int err;
+ struct asd_bios_chim_struct *bc_struct;
+ u32 offs, size;
+
+ err = asd_find_dir_entry(dir, OCM_BIOS_CHIM_DE, &offs, &size);
+ if (err) {
+ ASD_DPRINTK("couldn't find BIOS_CHIM dir ent\n");
+ goto out;
+ }
+ err = -ENOMEM;
+ bc_struct = kmalloc(sizeof(*bc_struct), GFP_KERNEL);
+ if (!bc_struct) {
+ asd_printk("no memory for bios_chim struct\n");
+ goto out;
+ }
+ err = asd_read_ocm_seg(asd_ha, (void *)bc_struct, offs,
+ sizeof(*bc_struct));
+ if (err) {
+ ASD_DPRINTK("couldn't read ocm segment\n");
+ goto out2;
+ }
+ if (strncmp(bc_struct->sig, "SOIB", 4)
+ && strncmp(bc_struct->sig, "IPSA", 4)) {
+ ASD_DPRINTK("BIOS_CHIM entry has no valid sig(%c%c%c%c)\n",
+ bc_struct->sig[0], bc_struct->sig[1],
+ bc_struct->sig[2], bc_struct->sig[3]);
+ err = -ENOENT;
+ goto out2;
+ }
+ if (bc_struct->major != 1) {
+ asd_printk("BIOS_CHIM unsupported major version:0x%x\n",
+ bc_struct->major);
+ err = -ENOENT;
+ goto out2;
+ }
+ if (bc_struct->flags & BC_BIOS_PRESENT) {
+ asd_ha->hw_prof.bios.present = 1;
+ asd_ha->hw_prof.bios.maj = bc_struct->bios_major;
+ asd_ha->hw_prof.bios.min = bc_struct->bios_minor;
+ asd_ha->hw_prof.bios.bld = le32_to_cpu(bc_struct->bios_build);
+ ASD_DPRINTK("BIOS present (%d,%d), %d\n",
+ asd_ha->hw_prof.bios.maj,
+ asd_ha->hw_prof.bios.min,
+ asd_ha->hw_prof.bios.bld);
+ }
+ asd_ha->hw_prof.ue.num = le16_to_cpu(bc_struct->ue_num);
+ asd_ha->hw_prof.ue.size= le16_to_cpu(bc_struct->ue_size);
+ ASD_DPRINTK("ue num:%d, ue size:%d\n", asd_ha->hw_prof.ue.num,
+ asd_ha->hw_prof.ue.size);
+ size = asd_ha->hw_prof.ue.num * asd_ha->hw_prof.ue.size;
+ if (size > 0) {
+ err = -ENOMEM;
+ asd_ha->hw_prof.ue.area = kmalloc(size, GFP_KERNEL);
+ if (!asd_ha->hw_prof.ue.area)
+ goto out2;
+ err = asd_read_ocm_seg(asd_ha, (void *)asd_ha->hw_prof.ue.area,
+ offs + sizeof(*bc_struct), size);
+ if (err) {
+ kfree(asd_ha->hw_prof.ue.area);
+ asd_ha->hw_prof.ue.area = NULL;
+ asd_ha->hw_prof.ue.num = 0;
+ asd_ha->hw_prof.ue.size = 0;
+ ASD_DPRINTK("couldn't read ue entries(%d)\n", err);
+ }
+ }
+out2:
+ kfree(bc_struct);
+out:
+ return err;
+}
+
+/**
+ * asd_read_ocm - read on chip memory (OCM)
+ * @asd_ha: pointer to the host adapter structure
+ */
+int asd_read_ocm(struct asd_ha_struct *asd_ha)
+{
+ int err;
+ struct asd_ocm_dir *dir;
+
+ dir = kmalloc(sizeof(*dir), GFP_KERNEL);
+ if (!dir) {
+ asd_printk("no memory for ocm dir\n");
+ return -ENOMEM;
+ }
+
+ err = asd_read_ocm_dir(asd_ha, dir, 0);
+ if (err)
+ goto out;
+
+ err = asd_get_bios_chim(asd_ha, dir);
+out:
+ kfree(dir);
+ return err;
+}
+
+/* ---------- FLASH stuff ---------- */
+
+#define FLASH_RESET 0xF0
+#define FLASH_MANUF_AMD 1
+
+#define FLASH_SIZE 0x200000
+#define FLASH_DIR_COOKIE "*** ADAPTEC FLASH DIRECTORY *** "
+#define FLASH_NEXT_ENTRY_OFFS 0x2000
+#define FLASH_MAX_DIR_ENTRIES 32
+
+#define FLASH_DE_TYPE_MASK 0x3FFFFFFF
+#define FLASH_DE_MS 0x120
+#define FLASH_DE_CTRL_A_USER 0xE0
+
+struct asd_flash_de {
+ __le32 type;
+ __le32 offs;
+ __le32 pad_size;
+ __le32 image_size;
+ __le32 chksum;
+ u8 _r[12];
+ u8 version[32];
+} __attribute__ ((packed));
+
+struct asd_flash_dir {
+ u8 cookie[32];
+ __le32 rev; /* 2 */
+ __le32 chksum;
+ __le32 chksum_antidote;
+ __le32 bld;
+ u8 bld_id[32]; /* build id data */
+ u8 ver_data[32]; /* date and time of build */
+ __le32 ae_mask;
+ __le32 v_mask;
+ __le32 oc_mask;
+ u8 _r[20];
+ struct asd_flash_de dir_entry[FLASH_MAX_DIR_ENTRIES];
+} __attribute__ ((packed));
+
+struct asd_manuf_sec {
+ char sig[2]; /* 'S', 'M' */
+ u16 offs_next;
+ u8 maj; /* 0 */
+ u8 min; /* 0 */
+ u16 chksum;
+ u16 size;
+ u8 _r[6];
+ u8 sas_addr[SAS_ADDR_SIZE];
+ u8 pcba_sn[ASD_PCBA_SN_SIZE];
+ /* Here start the other segments */
+ u8 linked_list[0];
+} __attribute__ ((packed));
+
+struct asd_manuf_phy_desc {
+ u8 state; /* low 4 bits */
+#define MS_PHY_STATE_ENABLEABLE 0
+#define MS_PHY_STATE_REPORTED 1
+#define MS_PHY_STATE_HIDDEN 2
+ u8 phy_id;
+ u16 _r;
+ u8 phy_control_0; /* mode 5 reg 0x160 */
+ u8 phy_control_1; /* mode 5 reg 0x161 */
+ u8 phy_control_2; /* mode 5 reg 0x162 */
+ u8 phy_control_3; /* mode 5 reg 0x163 */
+} __attribute__ ((packed));
+
+struct asd_manuf_phy_param {
+ char sig[2]; /* 'P', 'M' */
+ u16 next;
+ u8 maj; /* 0 */
+ u8 min; /* 2 */
+ u8 num_phy_desc; /* 8 */
+ u8 phy_desc_size; /* 8 */
+ u8 _r[3];
+ u8 usage_model_id;
+ u32 _r2;
+ struct asd_manuf_phy_desc phy_desc[ASD_MAX_PHYS];
+} __attribute__ ((packed));
+
+#if 0
+static const char *asd_sb_type[] = {
+ "unknown",
+ "SGPIO",
+ [2 ... 0x7F] = "unknown",
+ [0x80] = "ADPT_I2C",
+ [0x81 ... 0xFF] = "VENDOR_UNIQUExx"
+};
+#endif
+
+struct asd_ms_sb_desc {
+ u8 type;
+ u8 node_desc_index;
+ u8 conn_desc_index;
+ u8 _recvd[0];
+} __attribute__ ((packed));
+
+#if 0
+static const char *asd_conn_type[] = {
+ [0 ... 7] = "unknown",
+ "SFF8470",
+ "SFF8482",
+ "SFF8484",
+ [0x80] = "PCIX_DAUGHTER0",
+ [0x81] = "SAS_DAUGHTER0",
+ [0x82 ... 0xFF] = "VENDOR_UNIQUExx"
+};
+
+static const char *asd_conn_location[] = {
+ "unknown",
+ "internal",
+ "external",
+ "board_to_board",
+};
+#endif
+
+struct asd_ms_conn_desc {
+ u8 type;
+ u8 location;
+ u8 num_sideband_desc;
+ u8 size_sideband_desc;
+ u32 _resvd;
+ u8 name[16];
+ struct asd_ms_sb_desc sb_desc[0];
+} __attribute__ ((packed));
+
+struct asd_nd_phy_desc {
+ u8 vp_attch_type;
+ u8 attch_specific[0];
+} __attribute__ ((packed));
+
+#if 0
+static const char *asd_node_type[] = {
+ "IOP",
+ "IO_CONTROLLER",
+ "EXPANDER",
+ "PORT_MULTIPLIER",
+ "PORT_MULTIPLEXER",
+ "MULTI_DROP_I2C_BUS",
+};
+#endif
+
+struct asd_ms_node_desc {
+ u8 type;
+ u8 num_phy_desc;
+ u8 size_phy_desc;
+ u8 _resvd;
+ u8 name[16];
+ struct asd_nd_phy_desc phy_desc[0];
+} __attribute__ ((packed));
+
+struct asd_ms_conn_map {
+ char sig[2]; /* 'M', 'C' */
+ __le16 next;
+ u8 maj; /* 0 */
+ u8 min; /* 0 */
+ __le16 cm_size; /* size of this struct */
+ u8 num_conn;
+ u8 conn_size;
+ u8 num_nodes;
+ u8 usage_model_id;
+ u32 _resvd;
+ struct asd_ms_conn_desc conn_desc[0];
+ struct asd_ms_node_desc node_desc[0];
+} __attribute__ ((packed));
+
+struct asd_ctrla_phy_entry {
+ u8 sas_addr[SAS_ADDR_SIZE];
+ u8 sas_link_rates; /* max in hi bits, min in low bits */
+ u8 flags;
+ u8 sata_link_rates;
+ u8 _r[5];
+} __attribute__ ((packed));
+
+struct asd_ctrla_phy_settings {
+ u8 id0; /* P'h'y */
+ u8 _r;
+ u16 next;
+ u8 num_phys; /* number of PHYs in the PCI function */
+ u8 _r2[3];
+ struct asd_ctrla_phy_entry phy_ent[ASD_MAX_PHYS];
+} __attribute__ ((packed));
+
+struct asd_ll_el {
+ u8 id0;
+ u8 id1;
+ __le16 next;
+ u8 something_here[0];
+} __attribute__ ((packed));
+
+static int asd_poll_flash(struct asd_ha_struct *asd_ha)
+{
+ int c;
+ u8 d;
+
+ for (c = 5000; c > 0; c--) {
+ d = asd_read_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar);
+ d ^= asd_read_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar);
+ if (!d)
+ return 0;
+ udelay(5);
+ }
+ return -ENOENT;
+}
+
+static int asd_reset_flash(struct asd_ha_struct *asd_ha)
+{
+ int err;
+
+ err = asd_poll_flash(asd_ha);
+ if (err)
+ return err;
+ asd_write_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar, FLASH_RESET);
+ err = asd_poll_flash(asd_ha);
+
+ return err;
+}
+
+static inline int asd_read_flash_seg(struct asd_ha_struct *asd_ha,
+ void *buffer, u32 offs, int size)
+{
+ asd_read_reg_string(asd_ha, buffer, asd_ha->hw_prof.flash.bar+offs,
+ size);
+ return 0;
+}
+
+/**
+ * asd_find_flash_dir - finds and reads the flash directory
+ * @asd_ha: pointer to the host adapter structure
+ * @flash_dir: pointer to flash directory structure
+ *
+ * If found, the flash directory segment will be copied to
+ * @flash_dir. Return 1 if found, 0 if not.
+ */
+static int asd_find_flash_dir(struct asd_ha_struct *asd_ha,
+ struct asd_flash_dir *flash_dir)
+{
+ u32 v;
+ for (v = 0; v < FLASH_SIZE; v += FLASH_NEXT_ENTRY_OFFS) {
+ asd_read_flash_seg(asd_ha, flash_dir, v,
+ sizeof(FLASH_DIR_COOKIE)-1);
+ if (memcmp(flash_dir->cookie, FLASH_DIR_COOKIE,
+ sizeof(FLASH_DIR_COOKIE)-1) == 0) {
+ asd_ha->hw_prof.flash.dir_offs = v;
+ asd_read_flash_seg(asd_ha, flash_dir, v,
+ sizeof(*flash_dir));
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int asd_flash_getid(struct asd_ha_struct *asd_ha)
+{
+ int err = 0;
+ u32 reg, inc;
+
+ reg = asd_read_reg_dword(asd_ha, EXSICNFGR);
+
+ if (!(reg & FLASHEX)) {
+ ASD_DPRINTK("flash doesn't exist\n");
+ return -ENOENT;
+ }
+ if (pci_read_config_dword(asd_ha->pcidev, PCI_CONF_FLSH_BAR,
+ &asd_ha->hw_prof.flash.bar)) {
+ asd_printk("couldn't read PCI_CONF_FLSH_BAR of %s\n",
+ pci_name(asd_ha->pcidev));
+ return -ENOENT;
+ }
+ asd_ha->hw_prof.flash.present = 1;
+ asd_ha->hw_prof.flash.wide = reg & FLASHW ? 1 : 0;
+ err = asd_reset_flash(asd_ha);
+ if (err) {
+ ASD_DPRINTK("couldn't reset flash(%d)\n", err);
+ return err;
+ }
+ /* Get flash info. This would most likely be AMD Am29LV family flash.
+ * First try the sequence for word mode. It is the same as for
+ * 008B (byte mode only), 160B (word mode) and 800D (word mode).
+ */
+ reg = asd_ha->hw_prof.flash.bar;
+ inc = asd_ha->hw_prof.flash.wide ? 2 : 1;
+ asd_write_reg_byte(asd_ha, reg + 0x555, 0xAA);
+ asd_write_reg_byte(asd_ha, reg + 0x2AA, 0x55);
+ asd_write_reg_byte(asd_ha, reg + 0x555, 0x90);
+ asd_ha->hw_prof.flash.manuf = asd_read_reg_byte(asd_ha, reg);
+ asd_ha->hw_prof.flash.dev_id= asd_read_reg_byte(asd_ha,reg+inc);
+ asd_ha->hw_prof.flash.sec_prot = asd_read_reg_byte(asd_ha,reg+inc+inc);
+ /* Get out of autoselect mode. */
+ err = asd_reset_flash(asd_ha);
+
+ if (asd_ha->hw_prof.flash.manuf == FLASH_MANUF_AMD) {
+ ASD_DPRINTK("0Found FLASH(%d) manuf:%d, dev_id:0x%x, "
+ "sec_prot:%d\n",
+ asd_ha->hw_prof.flash.wide ? 16 : 8,
+ asd_ha->hw_prof.flash.manuf,
+ asd_ha->hw_prof.flash.dev_id,
+ asd_ha->hw_prof.flash.sec_prot);
+ return 0;
+ }
+
+ /* Ok, try the sequence for byte mode of 160B and 800D.
+ * We may actually never need this.
+ */
+ asd_write_reg_byte(asd_ha, reg + 0xAAA, 0xAA);
+ asd_write_reg_byte(asd_ha, reg + 0x555, 0x55);
+ asd_write_reg_byte(asd_ha, reg + 0xAAA, 0x90);
+ asd_ha->hw_prof.flash.manuf = asd_read_reg_byte(asd_ha, reg);
+ asd_ha->hw_prof.flash.dev_id = asd_read_reg_byte(asd_ha, reg + 2);
+ asd_ha->hw_prof.flash.sec_prot = asd_read_reg_byte(asd_ha, reg + 4);
+ err = asd_reset_flash(asd_ha);
+
+ if (asd_ha->hw_prof.flash.manuf == FLASH_MANUF_AMD) {
+ ASD_DPRINTK("1Found FLASH(%d) manuf:%d, dev_id:0x%x, "
+ "sec_prot:%d\n",
+ asd_ha->hw_prof.flash.wide ? 16 : 8,
+ asd_ha->hw_prof.flash.manuf,
+ asd_ha->hw_prof.flash.dev_id,
+ asd_ha->hw_prof.flash.sec_prot);
+ return 0;
+ }
+
+ return -ENOENT;
+}
+
+static u16 asd_calc_flash_chksum(u16 *p, int size)
+{
+ u16 chksum = 0;
+
+ while (size-- > 0)
+ chksum += *p++;
+
+ return chksum;
+}
+
+
+static int asd_find_flash_de(struct asd_flash_dir *flash_dir, u32 entry_type,
+ u32 *offs, u32 *size)
+{
+ int i;
+ struct asd_flash_de *de;
+
+ for (i = 0; i < FLASH_MAX_DIR_ENTRIES; i++) {
+ u32 type = le32_to_cpu(flash_dir->dir_entry[i].type);
+
+ type &= FLASH_DE_TYPE_MASK;
+ if (type == entry_type)
+ break;
+ }
+ if (i >= FLASH_MAX_DIR_ENTRIES)
+ return -ENOENT;
+ de = &flash_dir->dir_entry[i];
+ *offs = le32_to_cpu(de->offs);
+ *size = le32_to_cpu(de->pad_size);
+ return 0;
+}
+
+static int asd_validate_ms(struct asd_manuf_sec *ms)
+{
+ if (ms->sig[0] != 'S' || ms->sig[1] != 'M') {
+ ASD_DPRINTK("manuf sec: no valid sig(%c%c)\n",
+ ms->sig[0], ms->sig[1]);
+ return -ENOENT;
+ }
+ if (ms->maj != 0) {
+ asd_printk("unsupported manuf. sector. major version:%x\n",
+ ms->maj);
+ return -ENOENT;
+ }
+ ms->offs_next = le16_to_cpu((__force __le16) ms->offs_next);
+ ms->chksum = le16_to_cpu((__force __le16) ms->chksum);
+ ms->size = le16_to_cpu((__force __le16) ms->size);
+
+ if (asd_calc_flash_chksum((u16 *)ms, ms->size/2)) {
+ ASD_DPRINTK("failed manuf sector checksum\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int asd_ms_get_sas_addr(struct asd_ha_struct *asd_ha,
+ struct asd_manuf_sec *ms)
+{
+ memcpy(asd_ha->hw_prof.sas_addr, ms->sas_addr, SAS_ADDR_SIZE);
+ return 0;
+}
+
+static int asd_ms_get_pcba_sn(struct asd_ha_struct *asd_ha,
+ struct asd_manuf_sec *ms)
+{
+ memcpy(asd_ha->hw_prof.pcba_sn, ms->pcba_sn, ASD_PCBA_SN_SIZE);
+ asd_ha->hw_prof.pcba_sn[ASD_PCBA_SN_SIZE] = '\0';
+ return 0;
+}
+
+/**
+ * asd_find_ll_by_id - find a linked list entry by its id
+ * @start: void pointer to the first element in the linked list
+ * @id0: the first byte of the id (offs 0)
+ * @id1: the second byte of the id (offs 1)
+ *
+ * @start has to be the _base_ element start, since the
+ * linked list entries's offset is from this pointer.
+ * Some linked list entries use only the first id, in which case
+ * you can pass 0xFF for the second.
+ */
+static void *asd_find_ll_by_id(void * const start, const u8 id0, const u8 id1)
+{
+ struct asd_ll_el *el = start;
+
+ do {
+ switch (id1) {
+ default:
+ if (el->id1 == id1)
+ case 0xFF:
+ if (el->id0 == id0)
+ return el;
+ }
+ el = start + le16_to_cpu(el->next);
+ } while (el != start);
+
+ return NULL;
+}
+
+/**
+ * asd_ms_get_phy_params - get phy parameters from the manufacturing sector
+ * @asd_ha: pointer to the host adapter structure
+ * @manuf_sec: pointer to the manufacturing sector
+ *
+ * The manufacturing sector contans also the linked list of sub-segments,
+ * since when it was read, its size was taken from the flash directory,
+ * not from the structure size.
+ *
+ * HIDDEN phys do not count in the total count. REPORTED phys cannot
+ * be enabled but are reported and counted towards the total.
+ * ENEBLEABLE phys are enabled by default and count towards the total.
+ * The absolute total phy number is ASD_MAX_PHYS. hw_prof->num_phys
+ * merely specifies the number of phys the host adapter decided to
+ * report. E.g., it is possible for phys 0, 1 and 2 to be HIDDEN,
+ * phys 3, 4 and 5 to be REPORTED and phys 6 and 7 to be ENEBLEABLE.
+ * In this case ASD_MAX_PHYS is 8, hw_prof->num_phys is 5, and only 2
+ * are actually enabled (enabled by default, max number of phys
+ * enableable in this case).
+ */
+static int asd_ms_get_phy_params(struct asd_ha_struct *asd_ha,
+ struct asd_manuf_sec *manuf_sec)
+{
+ int i;
+ int en_phys = 0;
+ int rep_phys = 0;
+ struct asd_manuf_phy_param *phy_param;
+
+ phy_param = asd_find_ll_by_id(manuf_sec, 'P', 'M');
+ if (!phy_param) {
+ ASD_DPRINTK("ms: no phy parameters found\n");
+ return -ENOENT;
+ }
+
+ if (phy_param->maj != 0) {
+ asd_printk("unsupported manuf. phy param major version:0x%x\n",
+ phy_param->maj);
+ return -ENOENT;
+ }
+
+ ASD_DPRINTK("ms: num_phy_desc: %d\n", phy_param->num_phy_desc);
+ asd_ha->hw_prof.enabled_phys = 0;
+ for (i = 0; i < phy_param->num_phy_desc; i++) {
+ struct asd_manuf_phy_desc *pd = &phy_param->phy_desc[i];
+ switch (pd->state & 0xF) {
+ case MS_PHY_STATE_HIDDEN:
+ ASD_DPRINTK("ms: phy%d: HIDDEN\n", i);
+ continue;
+ case MS_PHY_STATE_REPORTED:
+ ASD_DPRINTK("ms: phy%d: REPORTED\n", i);
+ asd_ha->hw_prof.enabled_phys &= ~(1 << i);
+ rep_phys++;
+ continue;
+ case MS_PHY_STATE_ENABLEABLE:
+ ASD_DPRINTK("ms: phy%d: ENEBLEABLE\n", i);
+ asd_ha->hw_prof.enabled_phys |= (1 << i);
+ en_phys++;
+ break;
+ }
+ asd_ha->hw_prof.phy_desc[i].phy_control_0 = pd->phy_control_0;
+ asd_ha->hw_prof.phy_desc[i].phy_control_1 = pd->phy_control_1;
+ asd_ha->hw_prof.phy_desc[i].phy_control_2 = pd->phy_control_2;
+ asd_ha->hw_prof.phy_desc[i].phy_control_3 = pd->phy_control_3;
+ }
+ asd_ha->hw_prof.max_phys = rep_phys + en_phys;
+ asd_ha->hw_prof.num_phys = en_phys;
+ ASD_DPRINTK("ms: max_phys:0x%x, num_phys:0x%x\n",
+ asd_ha->hw_prof.max_phys, asd_ha->hw_prof.num_phys);
+ ASD_DPRINTK("ms: enabled_phys:0x%x\n", asd_ha->hw_prof.enabled_phys);
+ return 0;
+}
+
+static int asd_ms_get_connector_map(struct asd_ha_struct *asd_ha,
+ struct asd_manuf_sec *manuf_sec)
+{
+ struct asd_ms_conn_map *cm;
+
+ cm = asd_find_ll_by_id(manuf_sec, 'M', 'C');
+ if (!cm) {
+ ASD_DPRINTK("ms: no connector map found\n");
+ return -ENOENT;
+ }
+
+ if (cm->maj != 0) {
+ ASD_DPRINTK("ms: unsupported: connector map major version 0x%x"
+ "\n", cm->maj);
+ return -ENOENT;
+ }
+
+ /* XXX */
+
+ return 0;
+}
+
+
+/**
+ * asd_process_ms - find and extract information from the manufacturing sector
+ * @asd_ha: pointer to the host adapter structure
+ * @flash_dir: pointer to the flash directory
+ */
+static int asd_process_ms(struct asd_ha_struct *asd_ha,
+ struct asd_flash_dir *flash_dir)
+{
+ int err;
+ struct asd_manuf_sec *manuf_sec;
+ u32 offs, size;
+
+ err = asd_find_flash_de(flash_dir, FLASH_DE_MS, &offs, &size);
+ if (err) {
+ ASD_DPRINTK("Couldn't find the manuf. sector\n");
+ goto out;
+ }
+
+ if (size == 0)
+ goto out;
+
+ err = -ENOMEM;
+ manuf_sec = kmalloc(size, GFP_KERNEL);
+ if (!manuf_sec) {
+ ASD_DPRINTK("no mem for manuf sector\n");
+ goto out;
+ }
+
+ err = asd_read_flash_seg(asd_ha, (void *)manuf_sec, offs, size);
+ if (err) {
+ ASD_DPRINTK("couldn't read manuf sector at 0x%x, size 0x%x\n",
+ offs, size);
+ goto out2;
+ }
+
+ err = asd_validate_ms(manuf_sec);
+ if (err) {
+ ASD_DPRINTK("couldn't validate manuf sector\n");
+ goto out2;
+ }
+
+ err = asd_ms_get_sas_addr(asd_ha, manuf_sec);
+ if (err) {
+ ASD_DPRINTK("couldn't read the SAS_ADDR\n");
+ goto out2;
+ }
+ ASD_DPRINTK("manuf sect SAS_ADDR %llx\n",
+ SAS_ADDR(asd_ha->hw_prof.sas_addr));
+
+ err = asd_ms_get_pcba_sn(asd_ha, manuf_sec);
+ if (err) {
+ ASD_DPRINTK("couldn't read the PCBA SN\n");
+ goto out2;
+ }
+ ASD_DPRINTK("manuf sect PCBA SN %s\n", asd_ha->hw_prof.pcba_sn);
+
+ err = asd_ms_get_phy_params(asd_ha, manuf_sec);
+ if (err) {
+ ASD_DPRINTK("ms: couldn't get phy parameters\n");
+ goto out2;
+ }
+
+ err = asd_ms_get_connector_map(asd_ha, manuf_sec);
+ if (err) {
+ ASD_DPRINTK("ms: couldn't get connector map\n");
+ goto out2;
+ }
+
+out2:
+ kfree(manuf_sec);
+out:
+ return err;
+}
+
+static int asd_process_ctrla_phy_settings(struct asd_ha_struct *asd_ha,
+ struct asd_ctrla_phy_settings *ps)
+{
+ int i;
+ for (i = 0; i < ps->num_phys; i++) {
+ struct asd_ctrla_phy_entry *pe = &ps->phy_ent[i];
+
+ if (!PHY_ENABLED(asd_ha, i))
+ continue;
+ if (*(u64 *)pe->sas_addr == 0) {
+ asd_ha->hw_prof.enabled_phys &= ~(1 << i);
+ continue;
+ }
+ /* This is the SAS address which should be sent in IDENTIFY. */
+ memcpy(asd_ha->hw_prof.phy_desc[i].sas_addr, pe->sas_addr,
+ SAS_ADDR_SIZE);
+ asd_ha->hw_prof.phy_desc[i].max_sas_lrate =
+ (pe->sas_link_rates & 0xF0) >> 4;
+ asd_ha->hw_prof.phy_desc[i].min_sas_lrate =
+ (pe->sas_link_rates & 0x0F);
+ asd_ha->hw_prof.phy_desc[i].max_sata_lrate =
+ (pe->sata_link_rates & 0xF0) >> 4;
+ asd_ha->hw_prof.phy_desc[i].min_sata_lrate =
+ (pe->sata_link_rates & 0x0F);
+ asd_ha->hw_prof.phy_desc[i].flags = pe->flags;
+ ASD_DPRINTK("ctrla: phy%d: sas_addr: %llx, sas rate:0x%x-0x%x,"
+ " sata rate:0x%x-0x%x, flags:0x%x\n",
+ i,
+ SAS_ADDR(asd_ha->hw_prof.phy_desc[i].sas_addr),
+ asd_ha->hw_prof.phy_desc[i].max_sas_lrate,
+ asd_ha->hw_prof.phy_desc[i].min_sas_lrate,
+ asd_ha->hw_prof.phy_desc[i].max_sata_lrate,
+ asd_ha->hw_prof.phy_desc[i].min_sata_lrate,
+ asd_ha->hw_prof.phy_desc[i].flags);
+ }
+
+ return 0;
+}
+
+/**
+ * asd_process_ctrl_a_user - process CTRL-A user settings
+ * @asd_ha: pointer to the host adapter structure
+ * @flash_dir: pointer to the flash directory
+ */
+static int asd_process_ctrl_a_user(struct asd_ha_struct *asd_ha,
+ struct asd_flash_dir *flash_dir)
+{
+ int err;
+ u32 offs, size;
+ struct asd_ll_el *el;
+ struct asd_ctrla_phy_settings *ps;
+
+ err = asd_find_flash_de(flash_dir, FLASH_DE_CTRL_A_USER, &offs, &size);
+ if (err) {
+ ASD_DPRINTK("couldn't find CTRL-A user settings section\n");
+ goto out;
+ }
+
+ if (size == 0)
+ goto out;
+
+ err = -ENOMEM;
+ el = kmalloc(size, GFP_KERNEL);
+ if (!el) {
+ ASD_DPRINTK("no mem for ctrla user settings section\n");
+ goto out;
+ }
+
+ err = asd_read_flash_seg(asd_ha, (void *)el, offs, size);
+ if (err) {
+ ASD_DPRINTK("couldn't read ctrla phy settings section\n");
+ goto out2;
+ }
+
+ err = -ENOENT;
+ ps = asd_find_ll_by_id(el, 'h', 0xFF);
+ if (!ps) {
+ ASD_DPRINTK("couldn't find ctrla phy settings struct\n");
+ goto out2;
+ }
+
+ err = asd_process_ctrla_phy_settings(asd_ha, ps);
+ if (err) {
+ ASD_DPRINTK("couldn't process ctrla phy settings\n");
+ goto out2;
+ }
+out2:
+ kfree(el);
+out:
+ return err;
+}
+
+/**
+ * asd_read_flash - read flash memory
+ * @asd_ha: pointer to the host adapter structure
+ */
+int asd_read_flash(struct asd_ha_struct *asd_ha)
+{
+ int err;
+ struct asd_flash_dir *flash_dir;
+
+ err = asd_flash_getid(asd_ha);
+ if (err)
+ return err;
+
+ flash_dir = kmalloc(sizeof(*flash_dir), GFP_KERNEL);
+ if (!flash_dir)
+ return -ENOMEM;
+
+ err = -ENOENT;
+ if (!asd_find_flash_dir(asd_ha, flash_dir)) {
+ ASD_DPRINTK("couldn't find flash directory\n");
+ goto out;
+ }
+
+ if (le32_to_cpu(flash_dir->rev) != 2) {
+ asd_printk("unsupported flash dir version:0x%x\n",
+ le32_to_cpu(flash_dir->rev));
+ goto out;
+ }
+
+ err = asd_process_ms(asd_ha, flash_dir);
+ if (err) {
+ ASD_DPRINTK("couldn't process manuf sector settings\n");
+ goto out;
+ }
+
+ err = asd_process_ctrl_a_user(asd_ha, flash_dir);
+ if (err) {
+ ASD_DPRINTK("couldn't process CTRL-A user settings\n");
+ goto out;
+ }
+
+out:
+ kfree(flash_dir);
+ return err;
+}
reply other threads:[~2005-09-09 19:35 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4321E41F.20900@adaptec.com \
--to=luben_tuikov@adaptec.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.