From: Andy Stewart <andystewart@comcast.net>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Subject: Kernel 2.6.13 BUG tg3.c:2805 = crash
Date: Mon, 12 Sep 2005 22:43:40 -0400 [thread overview]
Message-ID: <43263CDC.1010604@comcast.net> (raw)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi Everybody,
My dual Opteron server recently crashed with this signature (thanks for
that serial console!). When the crash occurred, I was moving the mouse
and using a scrollbar in KDE. I cannot reproduce the problem.
Please cc: me as I am not subscribed to this mailing list. Please let
me know if I need to supply other information, or if there are
experiments I should conduct to further isolate this problem. I'd like
to help in any way possible.
Thanks!
Andy
- ----------- [cut here ] --------- [please bite here ] ---------
Kernel BUG at "drivers/net/tg3.c":2805
invalid operand: 0000 [1] SMP
CPU 1
Modules linked in: af_packet radeon drm ext3 jbd usbserial nfsd exportfs
lp snd_pcm_oss snd_mixer_oss ipv6 snd_via82xx gameport snd_ac97_codec sn
d_pcm snd_timer snd_pa
ge_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore
w83627hf eeprom i2c_sensor i2c_isa vmnet parport_pc parport vmmon
binfmt_misc e
dd usblp joydev sg st
sr_mod i2c_viapro i2c_core ohci_hcd ehci_hcd evdev dm_mod usbcore tg3
reiserfs aic7xxx sym53c8xx scsi_transport_spi sd_mod scsi_mod
Pid: 32068, comm: setiathome_4.02 Tainted: P 2.6.13
RIP: 0010:[<ffffffff880be9b6>] <ffffffff880be9b6>{:tg3:tg3_poll+294}
RSP: 0000:ffff81003feb7e68 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000000001b6 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 000000002df3f0fe RDI: ffff81002df3f140
RBP: ffff81003b6fd8f8 R08: 0000000000000042 R09: ffff810014fbdec8
R10: ffff810014fbc000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8100141b5400 R14: ffff81003d69f380 R15: 00000000000001b6
FS: 00002aaaab7bd0a0(0000) GS:ffffffff804ed880(0063) knlGS:000000005570a300
CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 00002aaaaec8e000 CR3: 00000000297aa000 CR4: 00000000000006e0
Process setiathome_4.02 (pid: 32068, threadinfo ffff810014fbc000, task
ffff81002ad42a10)
Stack: 000000e800000206 ffff81003d69f3ec 000000003dc11012 00000001000000ce
0000003f00010000 ffff81003d69f3cc ffff81003b74a000 ffff81003feb7f14
ffff81003d69f000 0000000000000246
Call Trace: <IRQ> <ffffffff881107b7>{:ohci_hcd:ohci_irq+55}
<ffffffff802f67b0>{net_rx_action+176}
<ffffffff8013a471>{__do_softirq+113}
<ffffffff8010ed87>{call_softirq+31}
<ffffffff801106d5>{do_softirq+53} <ffffffff8011072f>{do_IRQ+79}
<ffffffff8010e230>{ret_from_intr+0} <EOI>
Code: 0f 0b a3 d8 05 0c 88 ff ff ff ff c2 f5 0a 89 d8 49 8b 56 58
RIP <ffffffff880be9b6>{:tg3:tg3_poll+294} RSP <ffff81003feb7e68>
<0>Kernel panic - not syncing: Aiee, killing interrupt handler!
=====
amdtux:/usr/src/linux-2.6.13/scripts # ./ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux amdtux 2.6.13 #3 SMP Sat Sep 3 20:39:45 EDT 2005 x86_64 x86_64
x86_64 GNU/Linux
Gnu C 3.3.4
Gnu make 3.80
binutils 2.15.91.0.2
util-linux 2.12c
mount 2.12c
module-init-tools 3.1-pre5
e2fsprogs 1.35
jfsutils 1.1.7
reiserfsprogs 3.6.18
reiser4progs line
xfsprogs 2.6.13
pcmcia-cs 3.2.8
quota-tools 3.11.
PPP 2.4.2
isdn4k-utils 3.5
nfs-utils 1.0.6
Linux C Library x 1 root root 1412174 Oct 1 2004
/lib64/tls/libc.so.6
Dynamic linker (ldd) 2.3.3
Linux C++ Library 5.0.7
Procps 3.2.3
Net-tools 1.60
Kbd 1.12
Sh-utils 5.2.1
udev 030
Modules Loaded radeon drm usbserial nfsd exportfs lp snd_pcm_oss
snd_mixer_oss snd_via82xx gameport snd_ac97_codec w83627hf snd_pcm ipv6
snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd
eeprom soundcore i2c_sensor i2c_isa vmnet parport_pc parport vmmon
binfmt_misc edd usblp joydev sg st sr_mod i2c_viapro i2c_core ehci_hcd
ohci_hcd evdev dm_mod usbcore tg3 reiserfs aic7xxx sym53c8xx
scsi_transport_spi sd_mod scsi_mod
=====
=====
amdtux:/usr/src/linux-2.6.13/scripts # cat /proc/version
Linux version 2.6.13 (root@amdtux) (gcc version 3.3.4 (pre 3.3.5
20040809)) #3 SMP Sat Sep 3 20:39:45 EDT 2005
=====
=====
amdtux:/usr/src/linux-2.6.13/scripts # cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 5
model name : AMD Opteron(tm) Processor 244
stepping : 10
cpu MHz : 1804.155
cache size : 1024 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm
3dnowext 3dnow
bogomips : 3616.73
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp
processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 5
model name : AMD Opteron(tm) Processor 244
stepping : 10
cpu MHz : 1804.155
cache size : 1024 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm
3dnowext 3dnow
bogomips : 3608.45
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp
=====
=====
amdtux:/usr/src/linux-2.6.13/scripts # lspci -vvv
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP]
Host Bridge (rev 01)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 1300
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable)
Capabilities: [80] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW-
Rate=x4
Capabilities: [c0] #08 [0060]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #08 [8001]
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge
[K8T800 South] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: e8000000-f7ffffff
Expansion ROM at 0000a000 [disabled] [size=4K]
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875
(rev 14)
Subsystem: LSI Logic / Symbios Logic LSI53C876/E PCI to Dual
Channel SCSI Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 16000ns max), cache line size 10
Interrupt: pin A routed to IRQ 161
Region 0: I/O ports at b000 [size=1023M]
Region 1: Memory at fb010000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at fb016000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 00010000 [disabled]
0000:00:07.1 SCSI storage controller: LSI Logic / Symbios Logic 53c875
(rev 14)
Subsystem: LSI Logic / Symbios Logic LSI53C876/E PCI to Dual
Channel SCSI Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 16000ns max), cache line size 10
Interrupt: pin A routed to IRQ 161
Region 0: I/O ports at b400 [size=1023M]
Region 1: Memory at fb011000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at fb012000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 00010000 [disabled]
0000:00:08.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10
[OHCI])
Subsystem: Belkin Root Hub
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (250ns min, 10500ns max), cache line size 08
Interrupt: pin A routed to IRQ 169
Region 0: Memory at fb013000 (32-bit, non-prefetchable)
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:08.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10
[OHCI])
Subsystem: Belkin Root Hub
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (250ns min, 10500ns max), cache line size 08
Interrupt: pin B routed to IRQ 145
Region 0: Memory at fb014000 (32-bit, non-prefetchable)
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:08.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if
20 [EHCI])
Subsystem: Belkin Root Hub
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (4000ns min, 8500ns max), cache line size 10
Interrupt: pin C routed to IRQ 153
Region 0: Memory at fb015000 (32-bit, non-prefetchable)
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0b.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705
Gigabit Ethernet (rev 03)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 1300
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (16000ns min), cache line size 08
Interrupt: pin A routed to IRQ 145
Region 0: Memory at fb000000 (64-bit, non-prefetchable)
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+
Queue=0/3 Enable-
Address: fffffdf6fffefffc Data: effd
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA
RAID Controller (rev 80)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 1300
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin B routed to IRQ 177
Region 0: I/O ports at b800
Region 1: I/O ports at bc00 [size=4]
Region 2: I/O ports at c000 [size=8]
Region 3: I/O ports at c400 [size=4]
Region 4: I/O ports at c800 [size=16]
Region 5: I/O ports at cc00 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 1300
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 177
Region 4: I/O ports at d000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
[K8T800 South]
Subsystem: Micro-Star International Co., Ltd.: Unknown device 1300
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 1300
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 185
Region 0: I/O ports at e400
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] #08 [2101]
Capabilities: [a0] #08 [2101]
Capabilities: [c0] #08 [2101]
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:19.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] #08 [2101]
Capabilities: [a0] #08 [2101]
Capabilities: [c0] #08 [2101]
0000:00:19.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:19.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:19.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280
[Radeon 9200 PRO] (rev 01) (prog-if 00 [VGA])
Subsystem: Diamond Multimedia Systems: Unknown device 0140
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 145
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=f8000000]
Region 1: I/O ports at a000 [size=256]
Region 2: Memory at f9000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at 00020000 [disabled]
Capabilities: [58] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit-
FW- Rate=x4
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.1 Display controller: ATI Technologies Inc: Unknown device
5940 (rev 01)
Subsystem: Diamond Multimedia Systems: Unknown device 0141
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at f0000000 (32-bit, prefetchable) [disabled]
Region 1: Memory at f9010000 (32-bit, non-prefetchable)
[disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
=====
=====
Bootdata ok (command line is root=/dev/sda3 acpi=off console=tty0
console=ttyS1,115200n8 pci=routeirq selinux=0 splash=silent)
=====
- --
Andy Stewart, Founder
Worcester Linux Users' Group
Worcester, MA, USA
http://www.wlug.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFDJjzcHl0iXDssISsRAhXKAJoCEwTAEAWt4GHgAVltei0CzaqETACfQeWz
n92rK96zBSus+D0I6q6Y5bg=
=YBHd
-----END PGP SIGNATURE-----
next reply other threads:[~2005-09-13 2:43 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-13 2:43 Andy Stewart [this message]
2005-09-13 3:48 ` Kernel 2.6.13 BUG tg3.c:2805 = crash (this one isn't tainted) Andy Stewart
2005-09-13 22:28 ` Chris Wright
2005-09-13 23:29 ` David S. Miller
2005-09-13 23:48 ` Chris Wright
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43263CDC.1010604@comcast.net \
--to=andystewart@comcast.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.