From mboxrd@z Thu Jan 1 00:00:00 1970 From: martind@noxam.com Date: Thu, 11 Jun 2009 04:55:06 +0000 Subject: [lm-sensors] Asus M3A78-C< - here is the RIGHT sensors3.conf lines Message-Id: <43301.1244696106@noxam.com> MIME-Version: 1 Content-Type: multipart/mixed; boundary="===============6299702356874107464==" List-Id: To: lm-sensors@vger.kernel.org --===============6299702356874107464== Content-type: multipart/alternative; boundary="Boundary_(ID_wErvJoxh1P/nk10RUXy5Wg)" --Boundary_(ID_wErvJoxh1P/nk10RUXy5Wg) Content-type: text/plain; charset=utf-8 Content-transfer-encoding: 7BIT Hi all! After couple hours... figured out the config for an ASUS M3A78-CM motherboard Here you go! chip "it87-*" "it8712-*" # The values below have been tested on Asus M3A78-CM motherboards. label in0 "VCore 1" ignore in1 label in2 "+3.3V" ignore in3 label in4 "+12V" label in5 "+5V" ignore in6 ignore in7 label in8 "VBat" compute in4 ((28/10) +1)*@ , @/((28/10) +1) compute in5 @*(1+(22/10)), @/(1+(22/10)) set in0_min 1.30 * 0.95 set in0_max 1.30 * 1.05 set in2_min 3.3 * 0.95 set in2_max 3.3 * 1.05 set in4_min 12 * 0.95 set in4_max 12 * 1.05 set in5_min 5 * 0.95 set in5_max 5 * 1.05 set temp1_type 2 set temp2_type 2 set temp3_type 3 ignore temp3 label temp1 "CPU Temp" label temp2 "M/B Temp" _____________________________________ remove everything else! here is the output from sensors: frodo:/sys/class/hwmon/hwmon1/device # sensors atk0110-acpi-0 Adapter: ACPI interface Vcore Voltage: +1.30 V (min = +0.85 V, max = +1.60 V) +3.3 Voltage: +3.28 V (min = +2.97 V, max = +3.63 V) +5 Voltage: +4.97 V (min = +4.50 V, max = +5.50 V) +12 Voltage: +12.22 V (min = +10.20 V, max = +13.80 V) CPU FAN Speed: 2295 RPM (min = 600 RPM) CHASSIS FAN Speed: 0 RPM (min = 600 RPM) POWER FAN Speed: 1313 RPM (min = 600 RPM) CPU Temperature: +48.0°C (high = +60.0°C, crit = +95.0°C) MB Temperature: +35.0°C (high = +45.0°C, crit = +95.0°C) it8712-isa-0290 Adapter: ISA adapter VCore 1: +1.30 V (min = +1.23 V, max = +1.36 V) +3.3V: +3.28 V (min = +3.14 V, max = +3.47 V) +12V: +12.22 V (min = +11.37 V, max = +12.59 V) +5V: +4.97 V (min = +4.76 V, max = +5.27 V) VBat: +3.20 V fan1: 2295 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 1313 RPM (min = 0 RPM) CPU Temp: +48.0°C (low = -1.0°C, high = -5.0°C) sensor = thermistor M/B Temp: +35.0°C (low = -1.0°C, high = +127.0°C) sensor = thermistor cpu0_vid: +1.550 V frodo:/sys/class/hwmon/hwmon1/device # Best Regards Martin Desormeaux a.k.a Neo2048 --Boundary_(ID_wErvJoxh1P/nk10RUXy5Wg) Content-type: text/html; charset=utf-8 Content-transfer-encoding: quoted-printable

 

Hi all!

After couple hours... figured out the config= for an ASUS M3A78-CM motherboard

 

Here you go!

&nb= sp;

chip "it87-*" "it8712-*"

# The val= ues below have been tested on Asus M3A78-CM motherboards.

 =    label in0 "VCore 1"
    ignore i= n1
    label in2 "+3.3V"
  &nb= sp; ignore in3
    label in4 "+12V"
&nbs= p;   label in5 "+5V"
    ignore in6=
    ignore in7
    label in8 "= ;VBat"

    compute in4 ((28/10) +1)*@  , @/(= (28/10) +1)
    compute in5 @*(1+(22/10)),  @/(1+(= 22/10))

    set in0_min  1.30 * 0.95
 &= nbsp;  set in0_max  1.30 * 1.05
    set in2_m= in  3.3 * 0.95
    set in2_max  3.3 * 1.05    set in4_min   12 * 0.95
  &n= bsp; set in4_max   12 * 1.05
    set in5_min&= nbsp;   5 * 0.95
    set in5_max  &= nbsp; 5 * 1.05

    set temp1_type 2
   = set temp2_type 2
    set temp3_type 3
    ig= nore temp3

    label temp1     &nb= sp; "CPU Temp"
    label temp2   &n= bsp;   "M/B Temp"

__________________________= ___________

remove everything else!

here is the output from sen= sors:

 

frodo:/sys/class/hwmon/hwmon1/device # sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: &nbs= p;   +1.30 V  (min =3D  +0.85 V, max =3D  +1.60 V)=
 +3.3 Voltage:     +3.28 V  (min =3D&nb= sp; +2.97 V, max =3D  +3.63 V)
 +5 Voltage:   = ;    +4.97 V  (min =3D  +4.50 V, max =3D  +5.= 50 V)
 +12 Voltage:     +12.22 V  (min = =3D +10.20 V, max =3D +13.80 V)
CPU FAN Speed:    2295 = RPM  (min =3D  600 RPM)
CHASSIS FAN Speed:   0 RPM=   (min =3D  600 RPM)
POWER FAN Speed:  1313 RPM  (= min =3D  600 RPM)
CPU Temperature:   +48.0°C  = (high =3D +60.0°C, crit =3D +95.0°C)
MB Temperature: &nbs= p;  +35.0°C  (high =3D +45.0°C, crit =3D +95.0°C)

it8712-isa-0290
Adapter: ISA adapter
VCore 1:  =    +1.30 V  (min =3D  +1.23 V, max =3D  +1.36 V)+3.3V:       +3.28 V  (min =3D = +3.14 V, max =3D  +3.47 V)
+12V:     &n= bsp; +12.22 V  (min =3D +11.37 V, max =3D +12.59 V)
+5V: &nb= sp;       +4.97 V  (min =3D  +4.76 = V, max =3D  +5.27 V)
VBat:      &nb= sp; +3.20 V
fan1:       2295 RPM  (= min =3D    0 RPM)
fan2:     &n= bsp;    0 RPM  (min =3D    0 RPM)
f= an3:       1313 RPM  (min =3D  = ;  0 RPM)
CPU Temp:    +48.0°C  (low = ; =3D  -1.0°C, high =3D  -5.0°C)  sensor =3D thermis= tor
M/B Temp:    +35.0°C  (low  =3D = -1.0°C, high =3D +127.0°C)  sensor =3D thermistor
cpu0_v= id:   +1.550 V

frodo:/sys/class/hwmon/hwmon1/device #<= br /> 

 

Best Regards

 

Martin Desor= meaux

a.k.a Neo2048

= --Boundary_(ID_wErvJoxh1P/nk10RUXy5Wg)-- --===============6299702356874107464== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors --===============6299702356874107464==--