Re: [PATCH v2.1 4/7] arm64: dts: renesas: r8a7796: Add HDMI encoder instance

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Simon,

On Monday 10 Jul 2017 11:07:50 Simon Horman wrote:
> On Wed, Jun 21, 2017 at 03:17:30PM +0300, Laurent Pinchart wrote:
> > Add the HDMI encoder to the R8A7796 DT in disabled state.
> > 
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@ideasonboard.com>
> > ---
> > 
> >  arch/arm64/boot/dts/renesas/r8a7796.dtsi | 25 +++++++++++++++++++++++++
> >  1 file changed, 25 insertions(+)
> > 
> > Changes since v2:
> > 
> > - Rename node to hdmi@fead0000
> > 
> > diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> > b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index
> > ad9cd1c3199f..8c1a770c41cd 100644
> > --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> > @@ -1532,6 +1532,31 @@
> > 
> >  			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
> >  		
> >  		};
> > 
> > +		hdmi0: hdmi@fead0000 {
> > +			compatible = "renesas,r8a7796-hdmi", "renesas,rcar-
gen3-hdmi";
> > +			reg = <0 0xfead0000 0 0x10000>;
> > +			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE 
R8A7796_CLK_HDMI>;
> > +			clock-names = "iahb", "isfr";
> > +			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
> > +			resets = <&cpg 729>;
> > +			status = "disabled";
> > +
> > +			ports {
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> > +				port@0 {
> > +					reg = <0>;
> > +					dw_hdmi0_in: endpoint {
> > +						remote-endpoint = 
<&du_out_hdmi0>;
> 
> du_out_hdmi0 is used here but does not exist until the following patch is
> applied. What to do?

Good point. I'll resubmit patches 4/7 and 5/7 with a fix.

> > +					};
> > +				};
> > +				port@1 {
> > +					reg = <1>;
> > +				};
> > +			};
> > +		};
> > +
> >  		du: display@feb00000 {
> >  			/* placeholder */

-- 
Regards,

Laurent Pinchart