All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Antonino A. Daplas" <adaplas@gmail.com>
To: Linus Torvalds <torvalds@osdl.org>, Andrew Morton <akpm@osdl.org>
Cc: Linux Fbdev development list
	<linux-fbdev-devel@lists.sourceforge.net>,
	Sylvain Meyer <sylvain.meyer@worldonline.fr>
Subject: [PATCH] intelfb: Fix regression (blank display) from ioremap patch
Date: Thu, 29 Sep 2005 05:19:51 +0800	[thread overview]
Message-ID: <433B08F7.6060608@gmail.com> (raw)

- Workaround for the ioremap patch that produces a blank display on some
  chipsets
- Make hwcursor = 0 the default.  The hardware cursor does not work with all
  hardware.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
---
 Kconfig              |    1 +
 intelfb/intelfbdrv.c |   21 ++++++++++-----------
 2 files changed, 11 insertions(+), 11 deletions(-)


diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -768,6 +768,7 @@ config FB_INTEL
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select FB_SOFT_CURSOR
 	help
 	  This driver supports the on-board graphics built in to the Intel
           830M/845G/852GM/855GM/865G chipsets.
diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c
--- a/drivers/video/intelfb/intelfbdrv.c
+++ b/drivers/video/intelfb/intelfbdrv.c
@@ -226,7 +226,7 @@ MODULE_DEVICE_TABLE(pci, intelfb_pci_tab
 
 static int accel        = 1;
 static int vram         = 4;
-static int hwcursor     = 1;
+static int hwcursor     = 0;
 static int mtrr         = 1;
 static int fixed        = 0;
 static int noinit       = 0;
@@ -609,15 +609,9 @@ intelfb_pci_register(struct pci_dev *pde
 		dinfo->accel = 0;
 	}
 
-	if (MB(voffset) < stolen_size)
-		offset = (stolen_size >> 12);
-	else
-		offset = ROUND_UP_TO_PAGE(MB(voffset))/GTT_PAGE_SIZE;
-
 	/* Framebuffer parameters - Use all the stolen memory if >= vram */
-	if (ROUND_UP_TO_PAGE(stolen_size) >= ((offset << 12) +  MB(vram))) {
+	if (ROUND_UP_TO_PAGE(stolen_size) >= MB(vram)) {
 		dinfo->fb.size = ROUND_UP_TO_PAGE(stolen_size);
-		dinfo->fb.offset = 0;
 		dinfo->fbmem_gart = 0;
 	} else {
 		dinfo->fb.size =  MB(vram);
@@ -648,6 +642,11 @@ intelfb_pci_register(struct pci_dev *pde
 		return -ENODEV;
 	}
 
+	if (MB(voffset) < stolen_size)
+		offset = (stolen_size >> 12);
+	else
+		offset = ROUND_UP_TO_PAGE(MB(voffset))/GTT_PAGE_SIZE;
+
 	/* set the mem offsets - set them after the already used pages */
 	if (dinfo->accel) {
 		dinfo->ring.offset = offset + gtt_info.current_memory;
@@ -662,10 +661,11 @@ intelfb_pci_register(struct pci_dev *pde
 			+ (dinfo->cursor.size >> 12);
 	}
 
+	/* Allocate memories (which aren't stolen) */
 	/* Map the fb and MMIO regions */
 	/* ioremap only up to the end of used aperture */
 	dinfo->aperture.virtual = (u8 __iomem *)ioremap_nocache
-		(dinfo->aperture.physical, (dinfo->fb.offset << 12)
+		(dinfo->aperture.physical, ((offset + dinfo->fb.offset) << 12)
 		 + dinfo->fb.size);
 	if (!dinfo->aperture.virtual) {
 		ERR_MSG("Cannot remap FB region.\n");
@@ -682,7 +682,6 @@ intelfb_pci_register(struct pci_dev *pde
 		return -ENODEV;
 	}
 
-	/* Allocate memories (which aren't stolen) */
 	if (dinfo->accel) {
 		if (!(dinfo->gtt_ring_mem =
 		      agp_allocate_memory(bridge, dinfo->ring.size >> 12,
@@ -1484,7 +1483,7 @@ intelfb_cursor(struct fb_info *info, str
 #endif
 
 	if (!dinfo->hwcursor)
-		return -ENXIO;
+		return soft_cursor(info, cursor);
 
 	intelfbhw_cursor_hide(dinfo);
 



-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl

                 reply	other threads:[~2005-09-28 23:41 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=433B08F7.6060608@gmail.com \
    --to=adaplas@gmail.com \
    --cc=akpm@osdl.org \
    --cc=linux-fbdev-devel@lists.sourceforge.net \
    --cc=sylvain.meyer@worldonline.fr \
    --cc=torvalds@osdl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.