From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <433C0F0D.2080605@xmission.com> From: Brad Midgley MIME-Version: 1.0 To: bluez-devel@lists.sourceforge.net Subject: Re: [Bluez-devel] snd-bt-sco on an UART bluetooth device References: In-Reply-To: Content-Type: text/plain; charset=us-ascii; format=flowed Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net Reply-To: bluez-devel@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ development List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 29 Sep 2005 09:58:05 -0600 Anderson > for using a bluetooth headset). When I used a usb bluetooth dongle, > everything was ok. But, when I use the bluetooh on-board (UART type), > the sound on bluetooth headset is very bad and I can't hear anything, > just noise. I remember seeing someone else talk about this problem. It should work as long as the bluetooth adapter is still made by CSR. If it is a CSR chip then maybe there's a problem in the kernel driver. Brad ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel