From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michael Downey Subject: Re: hda-intel module hanging if ACPI enabled Date: Wed, 05 Oct 2005 10:29:20 -0600 Message-ID: <4343FF60.5040903@zymeta.com> References: <433C261D.8090100@zymeta.com> <20050929105612.A8457@cox.net> <433C2EDD.4050005@zymeta.com> <20050929115517.C8457@cox.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20050929115517.C8457@cox.net> Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Matt Porter wrote: >Ugh, this is supposed to have a unique identifying value. Did >you get a very early board from Intel? > > > >>The board has a BIOS revision string of: >>NT9410J.86A.1348.2005.0609.1737. I see that there is a newer BIOS 2104 >>released on Sept. 2 so updating the BIOS might make a difference. I will >>probably try the update in a day or two so I'll post my results then. >> >> > >You can check. However, I've looked at the BIOS updates that appear >to have no changes related to the HDA config default regs. My >current patches load up the appropriate config default values but >I currently have an issue with reliably identifying the appropriate >board for each set of values. > >You'll also need the patch update to get the retasking controls. > >I'm working with SigmaTel on this so let me check on some things >regarding board ID and then I'll hopefully have a patch to post >that will work for you. We may have to resort to manually >specifying the model type for these boards...I'm hoping to >avoid that though. > >-Matt > > I've updated the board to the latest BIOS revision and I'm still getting a Subsystem ID of 0. So updating the BIOS didn't help. As far as I know this is a retail board. It looks like it was manufactured sometime after June this year so it is possible it was a fairly early board. Also is the patch update for the driver available now? I've looked around and didn't notice any changes to any code in CVS so if you have a patch I'd be glad to try it out. I'm running 1.0.9b of ALSA but I don't mind updating to the latest and greatest. Michael ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl