From mboxrd@z Thu Jan  1 00:00:00 1970
From: Bill Gatliff <bgat@billgatliff.com>
Subject: How to get ac97_t pointer from snd_pcm_substream_t?
Date: Mon, 10 Oct 2005 12:31:22 -0500
Message-ID: <434AA56A.2020704@billgatliff.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Return-path: <alsa-devel-admin@lists.sourceforge.net>
Sender: alsa-devel-admin@lists.sourceforge.net
Errors-To: alsa-devel-admin@lists.sourceforge.net
List-Unsubscribe: <https://lists.sourceforge.net/lists/listinfo/alsa-devel>,
	<mailto:alsa-devel-request@lists.sourceforge.net?subject=unsubscribe>
List-Post: <mailto:alsa-devel@lists.sourceforge.net>
List-Help: <mailto:alsa-devel-request@lists.sourceforge.net?subject=help>
List-Subscribe: <https://lists.sourceforge.net/lists/listinfo/alsa-devel>,
	<mailto:alsa-devel-request@lists.sourceforge.net?subject=subscribe>
List-Archive: <http://sourceforge.net/mailarchive/forum.php?forum=alsa-devel>
To: alsa-devel@lists.sourceforge.net
List-Id: alsa-devel@alsa-project.org

Guys:

I want to call snd_ac97_set_rate() from my PCM prepare() handler.

I can't seem to figure out how to get the codec pointer (ac97 in my 
case) from a snd_pcm_substream_t.  Is it possible?

Thanks!


b.g.

-- 
Bill Gatliff
bgat@billgatliff.com



-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl