From: "Antonino A. Daplas" <adaplas@gmail.com>
To: Andrew Morton <akpm@osdl.org>
Cc: Linux Fbdev development list <linux-fbdev-devel@lists.sourceforge.net>
Subject: [PATCH 15/17] i810fb: Cleanup I2C code
Date: Tue, 18 Oct 2005 17:22:38 +0800 [thread overview]
Message-ID: <4354BEDE.9050601@gmail.com> (raw)
- The functions for reading the 1st and 2nd bus are essentially the same,
except for the register. Consolidate them all.
- According to Nicolas Boichat, there is an undocumented 3rd i2c bus for
attaching daughter cards. Add support for this.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
---
i810-i2c.c | 135 ++++++++++++++++++++----------------------------------------
i810.h | 3 -
i810_main.c | 2
i810_regs.h | 1
4 files changed, 51 insertions(+), 90 deletions(-)
diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/i810/i810-i2c.c
--- a/drivers/video/i810/i810-i2c.c
+++ b/drivers/video/i810/i810-i2c.c
@@ -46,92 +46,45 @@ static void i810i2c_setscl(void *data, i
struct i810fb_par *par = chan->par;
u8 __iomem *mmio = par->mmio_start_virtual;
- i810_writel(mmio, GPIOB, (state ? SCL_VAL_OUT : 0) | SCL_DIR |
+ i810_writel(mmio, chan->ddc_base, (state ? SCL_VAL_OUT : 0) | SCL_DIR |
SCL_DIR_MASK | SCL_VAL_MASK);
- i810_readl(mmio, GPIOB); /* flush posted write */
+ i810_readl(mmio, chan->ddc_base); /* flush posted write */
}
static void i810i2c_setsda(void *data, int state)
{
- struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
+ struct i810fb_i2c_chan *chan = data;
struct i810fb_par *par = chan->par;
u8 __iomem *mmio = par->mmio_start_virtual;
- i810_writel(mmio, GPIOB, (state ? SDA_VAL_OUT : 0) | SDA_DIR |
+ i810_writel(mmio, chan->ddc_base, (state ? SDA_VAL_OUT : 0) | SDA_DIR |
SDA_DIR_MASK | SDA_VAL_MASK);
- i810_readl(mmio, GPIOB); /* flush posted write */
+ i810_readl(mmio, chan->ddc_base); /* flush posted write */
}
static int i810i2c_getscl(void *data)
{
- struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
+ struct i810fb_i2c_chan *chan = data;
struct i810fb_par *par = chan->par;
u8 __iomem *mmio = par->mmio_start_virtual;
- i810_writel(mmio, GPIOB, SCL_DIR_MASK);
- i810_writel(mmio, GPIOB, 0);
- return (0 != (i810_readl(mmio, GPIOB) & SCL_VAL_IN));
+ i810_writel(mmio, chan->ddc_base, SCL_DIR_MASK);
+ i810_writel(mmio, chan->ddc_base, 0);
+ return ((i810_readl(mmio, chan->ddc_base) & SCL_VAL_IN) != 0);
}
static int i810i2c_getsda(void *data)
{
- struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
+ struct i810fb_i2c_chan *chan = data;
struct i810fb_par *par = chan->par;
u8 __iomem *mmio = par->mmio_start_virtual;
- i810_writel(mmio, GPIOB, SDA_DIR_MASK);
- i810_writel(mmio, GPIOB, 0);
- return (0 != (i810_readl(mmio, GPIOB) & SDA_VAL_IN));
+ i810_writel(mmio, chan->ddc_base, SDA_DIR_MASK);
+ i810_writel(mmio, chan->ddc_base, 0);
+ return ((i810_readl(mmio, chan->ddc_base) & SDA_VAL_IN) != 0);
}
-static void i810ddc_setscl(void *data, int state)
-{
- struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
- struct i810fb_par *par = chan->par;
- u8 __iomem *mmio = par->mmio_start_virtual;
-
- i810_writel(mmio, GPIOA, (state ? SCL_VAL_OUT : 0) | SCL_DIR |
- SCL_DIR_MASK | SCL_VAL_MASK);
- i810_readl(mmio, GPIOA); /* flush posted write */
-}
-
-static void i810ddc_setsda(void *data, int state)
-{
- struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
- struct i810fb_par *par = chan->par;
- u8 __iomem *mmio = par->mmio_start_virtual;
-
- i810_writel(mmio, GPIOA, (state ? SDA_VAL_OUT : 0) | SDA_DIR |
- SDA_DIR_MASK | SDA_VAL_MASK);
- i810_readl(mmio, GPIOA); /* flush posted write */
-}
-
-static int i810ddc_getscl(void *data)
-{
- struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
- struct i810fb_par *par = chan->par;
- u8 __iomem *mmio = par->mmio_start_virtual;
-
- i810_writel(mmio, GPIOA, SCL_DIR_MASK);
- i810_writel(mmio, GPIOA, 0);
- return (0 != (i810_readl(mmio, GPIOA) & SCL_VAL_IN));
-}
-
-static int i810ddc_getsda(void *data)
-{
- struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
- struct i810fb_par *par = chan->par;
- u8 __iomem *mmio = par->mmio_start_virtual;
-
- i810_writel(mmio, GPIOA, SDA_DIR_MASK);
- i810_writel(mmio, GPIOA, 0);
- return (0 != (i810_readl(mmio, GPIOA) & SDA_VAL_IN));
-}
-
-#define I2C_ALGO_DDC_I810 0x0e0000
-#define I2C_ALGO_I2C_I810 0x0f0000
-static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name,
- int conn)
+static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name)
{
int rc;
@@ -139,22 +92,11 @@ static int i810_setup_i2c_bus(struct i81
chan->adapter.owner = THIS_MODULE;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = &chan->par->dev->dev;
- switch (conn) {
- case 1:
- chan->adapter.id = I2C_ALGO_DDC_I810;
- chan->algo.setsda = i810ddc_setsda;
- chan->algo.setscl = i810ddc_setscl;
- chan->algo.getsda = i810ddc_getsda;
- chan->algo.getscl = i810ddc_getscl;
- break;
- case 2:
- chan->adapter.id = I2C_ALGO_I2C_I810;
- chan->algo.setsda = i810i2c_setsda;
- chan->algo.setscl = i810i2c_setscl;
- chan->algo.getsda = i810i2c_getsda;
- chan->algo.getscl = i810i2c_getscl;
- break;
- }
+ chan->adapter.id = I2C_HW_B_I810;
+ chan->algo.setsda = i810i2c_setsda;
+ chan->algo.setscl = i810i2c_setscl;
+ chan->algo.getsda = i810i2c_getsda;
+ chan->algo.getscl = i810i2c_getscl;
chan->algo.udelay = 10;
chan->algo.mdelay = 10;
chan->algo.timeout = (HZ/2);
@@ -168,11 +110,15 @@ static int i810_setup_i2c_bus(struct i81
udelay(20);
rc = i2c_bit_add_bus(&chan->adapter);
+
if (rc == 0)
dev_dbg(&chan->par->dev->dev, "I2C bus %s registered.\n",name);
- else
+ else {
dev_warn(&chan->par->dev->dev, "Failed to register I2C bus "
"%s.\n", name);
+ chan->par = NULL;
+ }
+
return rc;
}
@@ -180,8 +126,14 @@ void i810_create_i2c_busses(struct i810f
{
par->chan[0].par = par;
par->chan[1].par = par;
- i810_setup_i2c_bus(&par->chan[0], "I810-DDC", 1);
- i810_setup_i2c_bus(&par->chan[1], "I810-I2C", 2);
+ par->chan[2].par = par;
+
+ par->chan[0].ddc_base = GPIOA;
+ i810_setup_i2c_bus(&par->chan[0], "I810-DDC");
+ par->chan[1].ddc_base = GPIOB;
+ i810_setup_i2c_bus(&par->chan[1], "I810-I2C");
+ par->chan[2].ddc_base = GPIOC;
+ i810_setup_i2c_bus(&par->chan[2], "I810-GPIOC");
}
void i810_delete_i2c_busses(struct i810fb_par *par)
@@ -189,9 +141,14 @@ void i810_delete_i2c_busses(struct i810f
if (par->chan[0].par)
i2c_bit_del_bus(&par->chan[0].adapter);
par->chan[0].par = NULL;
+
if (par->chan[1].par)
i2c_bit_del_bus(&par->chan[1].adapter);
par->chan[1].par = NULL;
+
+ if (par->chan[2].par)
+ i2c_bit_del_bus(&par->chan[2].adapter);
+ par->chan[2].par = NULL;
}
static u8 *i810_do_probe_i2c_edid(struct i810fb_i2c_chan *chan)
@@ -221,6 +178,7 @@ static u8 *i810_do_probe_i2c_edid(struct
DPRINTK("i810-i2c: I2C Transfer successful\n");
return buf;
}
+
DPRINTK("i810-i2c: Unable to read EDID block.\n");
kfree(buf);
return NULL;
@@ -233,7 +191,7 @@ int i810_probe_i2c_connector(struct fb_i
int i;
DPRINTK("i810-i2c: Probe DDC%i Bus\n", conn);
- if (conn < 3) {
+ if (conn < 4) {
for (i = 0; i < 3; i++) {
/* Do the real work */
edid = i810_do_probe_i2c_edid(&par->chan[conn-1]);
@@ -241,11 +199,14 @@ int i810_probe_i2c_connector(struct fb_i
break;
}
} else {
- DPRINTK("i810-i2c: Getting EDID from BIOS\n");
- edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
- if (edid)
- memcpy(edid, fb_firmware_edid(info->device),
- EDID_LENGTH);
+ const u8 *e = fb_firmware_edid(info->device);
+
+ if (e != NULL) {
+ DPRINTK("i810-i2c: Getting EDID from BIOS\n");
+ edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
+ if (edid)
+ memcpy(edid, e, EDID_LENGTH);
+ }
}
if (out_edid)
@@ -253,5 +214,3 @@ int i810_probe_i2c_connector(struct fb_i
return (edid) ? 0 : 1;
}
-
-
diff --git a/drivers/video/i810/i810.h b/drivers/video/i810/i810.h
--- a/drivers/video/i810/i810.h
+++ b/drivers/video/i810/i810.h
@@ -249,6 +249,7 @@ struct i810fb_i2c_chan {
struct i810fb_par *par;
struct i2c_adapter adapter;
struct i2c_algo_bit_data algo;
+ unsigned long ddc_base;
};
struct i810fb_par {
@@ -262,7 +263,7 @@ struct i810fb_par {
struct heap_data iring;
struct heap_data cursor_heap;
struct vgastate state;
- struct i810fb_i2c_chan chan[2];
+ struct i810fb_i2c_chan chan[3];
atomic_t use_count;
u32 pseudo_palette[17];
unsigned long mmio_start_phys;
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -1854,7 +1854,7 @@ static void __devinit i810fb_find_init_m
#ifdef CONFIG_FB_I810_I2C
i810_create_i2c_busses(par);
- for (i = 0; i < 3; i++) {
+ for (i = 0; i < 4; i++) {
err = i810_probe_i2c_connector(info, &par->edid, i+1);
if (!err)
break;
diff --git a/drivers/video/i810/i810_regs.h b/drivers/video/i810/i810_regs.h
--- a/drivers/video/i810/i810_regs.h
+++ b/drivers/video/i810/i810_regs.h
@@ -70,6 +70,7 @@
#define HVSYNC 0x05000
#define GPIOA 0x05010
#define GPIOB 0x05014
+#define GPIOC 0x0501C
/* Clock Control and Power Management Registers (06000h 06FFFh) */
#define DCLK_0D 0x06000
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
reply other threads:[~2005-10-18 20:43 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4354BEDE.9050601@gmail.com \
--to=adaplas@gmail.com \
--cc=akpm@osdl.org \
--cc=linux-fbdev-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.