All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nathael PAJANI <nathael.pajani@cpe.fr>
To: linuxppc-embedded@ozlabs.org
Subject: Three-Speed Ethernet support on MPC8560 (TSEC)
Date: Fri, 21 Oct 2005 18:05:10 +0200	[thread overview]
Message-ID: <435911B6.9070600@cpe.fr> (raw)

Kumar Gala wrote:

 >> I will now go on with the Three-Speed Ethernet Controler, and there
 >> actually seem to be no support for it, but maybe I did not look at
 >> the right place?
 >
 >
 > The TSEC has been supported for a long time.  The driver is call
 > gianfar (drivers/net/gianfar*).
 >

OK, I found it, and remembered that at the begining of the port I 
wondered what the "struct platform_device ppc_sys_platform_devices[]" 
was for, now I know. and I'll try this for the FCC3 too.

There is a problem though, which I already had (and fixed) with the 
boot-loader: The gigabit ethernet is not set up correctly: Everything is 
fine with a Gigabit switch, but with a Fast ethernet switch there is no 
communication.
I'll look for this on monday!

Thanks a lot for the help !

             reply	other threads:[~2005-10-21 16:03 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-10-21 16:05 Nathael PAJANI [this message]
  -- strict thread matches above, loose matches on Subject: below --
2005-10-21 12:21 Three-Speed Ethernet support on MPC8560 (TSEC) Nathael PAJANI
2005-10-21 13:39 ` Kumar Gala
2005-10-21 17:18   ` Pantelis Antoniou

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=435911B6.9070600@cpe.fr \
    --to=nathael.pajani@cpe.fr \
    --cc=linuxppc-embedded@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.