From: Jeff Garzik <jgarzik@pobox.com>
To: Max Kellermann <max@duempel.org>
Cc: linux-kernel@vger.kernel.org, Andrew Morton <akpm@osdl.org>,
Alan Cox <alan@lxorguk.ukuu.org.uk>
Subject: [PATCH] Re: 2.6.14-rc4-mm1 and later: second ata_piix controller is invisible
Date: Sun, 30 Oct 2005 06:26:06 -0500 [thread overview]
Message-ID: <4364ADCE.60906@pobox.com> (raw)
In-Reply-To: <20051025095646.GA24977@roonstrasse.net>
[-- Attachment #1: Type: text/plain, Size: 888 bytes --]
Max Kellermann wrote:
> Hi Andrew,
>
> since 2.6.14-rc4-mm1, my second ata_piix (SATA) controller does not
> show up in dmesg, effectively hiding /dev/sdb. 2.6.14-rc2-mm2 and
> older (with the same kernel config) were ok, the same for Linus'
> kernels: 2.6.14-rc5 without -mm1 has /dev/sdb, too.
>
> 0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150
> Storage Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
> 0000:00:1f.2 0101: 8086:24d1 (rev 02)
>
> This PCI device (on-board on an Asus P4 mainboard) has two SATA
> connectors, showing up as ata1/sda and ata2/sdb.
I think I found the bug. ata_pci_init_one() got confused about the
meaning of 'n_ports'. I also found another bug in the same area,
related to legacy initialization.
See the attached patch for a suggested fix (ignore ata_piix changes,
which are obviously unrelated).
Jeff
[-- Attachment #2: patch.fix-piix-probe --]
[-- Type: text/plain, Size: 6168 bytes --]
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index be02147..b7fbf11 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -45,6 +45,7 @@
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -625,7 +626,8 @@ static int piix_init_one (struct pci_dev
unsigned int pata_chan = 0, sata_chan = 0;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "version " DRV_VERSION "\n");
/* no hotplugging support (FIXME) */
if (!in_module_init)
@@ -672,7 +674,9 @@ static int piix_init_one (struct pci_dev
port_info[pata_chan] = &piix_port_info[ich5_pata];
n_ports++;
- printk(KERN_WARNING DRV_NAME ": combined mode detected\n");
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "combined mode detected (p=%u, s=%u)\n",
+ pata_chan, sata_chan);
}
return ata_pci_init_one(pdev, port_info, n_ports);
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index cc089f1..4fa3621 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -4491,10 +4491,10 @@ void ata_pci_host_stop (struct ata_host_
*/
struct ata_probe_ent *
-ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports)
+ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info *port, int ports)
{
struct ata_probe_ent *probe_ent =
- ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
+ ata_probe_ent_alloc(pci_dev_to_dev(pdev), port);
int p = 0;
if (!probe_ent)
@@ -4527,11 +4527,11 @@ ata_pci_init_native_mode(struct pci_dev
return probe_ent;
}
-static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info **port, int port_num)
+static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info *port, int port_num)
{
struct ata_probe_ent *probe_ent;
- probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
+ probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port);
if (!probe_ent)
return NULL;
@@ -4678,14 +4678,19 @@ int ata_pci_init_one (struct pci_dev *pd
if (legacy_mode) {
if (legacy_mode & (1 << 0))
- probe_ent = ata_pci_init_legacy_port(pdev, port, 0);
+ probe_ent = ata_pci_init_legacy_port(pdev, port[0], 0);
if (legacy_mode & (1 << 1))
- probe_ent2 = ata_pci_init_legacy_port(pdev, port, 1);
+ probe_ent2 = ata_pci_init_legacy_port(pdev, port[1], 1);
} else {
- if (n_ports == 2)
- probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
- else
- probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY);
+ if (n_ports == 1)
+ probe_ent = ata_pci_init_native_mode(pdev, port[0],
+ ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+ else {
+ probe_ent = ata_pci_init_native_mode(pdev, port[0],
+ ATA_PORT_PRIMARY);
+ probe_ent2 = ata_pci_init_native_mode(pdev, port[1],
+ ATA_PORT_PRIMARY);
+ }
}
if (!probe_ent && !probe_ent2) {
rc = -ENOMEM;
@@ -4695,13 +4700,10 @@ int ata_pci_init_one (struct pci_dev *pd
pci_set_master(pdev);
/* FIXME: check ata_device_add return */
- if (legacy_mode) {
- if (legacy_mode & (1 << 0))
- ata_device_add(probe_ent);
- if (legacy_mode & (1 << 1))
- ata_device_add(probe_ent2);
- } else
+ if (probe_ent)
ata_device_add(probe_ent);
+ if (probe_ent2)
+ ata_device_add(probe_ent2);
kfree(probe_ent);
kfree(probe_ent2);
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
index 1a56d6c..596a4e0 100644
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -405,7 +405,7 @@ static int nv_init_one (struct pci_dev *
rc = -ENOMEM;
ppi = &nv_port_info;
- probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+ probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent)
goto err_out_regions;
diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
index 057f7b9..d3bcd38 100644
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -263,7 +263,7 @@ static int sis_init_one (struct pci_dev
goto err_out_regions;
ppi = &sis_port_info;
- probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+ probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent) {
rc = -ENOMEM;
goto err_out_regions;
diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
index d68dc7d..145405a 100644
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -202,7 +202,7 @@ static int uli_init_one (struct pci_dev
goto err_out_regions;
ppi = &uli_port_info;
- probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+ probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent) {
rc = -ENOMEM;
goto err_out_regions;
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
index 80e291a..f2a2736 100644
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -212,7 +212,7 @@ static struct ata_probe_ent *vt6420_init
struct ata_probe_ent *probe_ent;
struct ata_port_info *ppi = &svia_port_info;
- probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+ probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent)
return NULL;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 0ba3af7..e75112d 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -506,7 +506,7 @@ struct pci_bits {
extern void ata_pci_host_stop (struct ata_host_set *host_set);
extern struct ata_probe_ent *
-ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int portmask);
+ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info *port, int portmask);
extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits);
#endif /* CONFIG_PCI */
next prev parent reply other threads:[~2005-10-30 11:26 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-25 9:56 2.6.14-rc4-mm1 and later: second ata_piix controller is invisible Max Kellermann
2005-10-25 17:32 ` Andrew Morton
[not found] ` <20051025103310.51e1cdb2.akpm@osdl.org>
2005-10-26 6:50 ` Max Kellermann
2005-10-29 19:25 ` Jeff Garzik
2005-10-30 11:26 ` Jeff Garzik [this message]
2005-10-30 12:59 ` Jeff Garzik
2005-10-31 10:33 ` Max Kellermann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4364ADCE.60906@pobox.com \
--to=jgarzik@pobox.com \
--cc=akpm@osdl.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=max@duempel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.