All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nick Piggin <nickpiggin@yahoo.com.au>
To: linux-kernel <linux-kernel@vger.kernel.org>
Subject: [PATCH 1/3] vm: kswapd incmin
Date: Tue, 01 Nov 2005 16:19:49 +1100	[thread overview]
Message-ID: <4366FAF5.8020908@yahoo.com.au> (raw)
In-Reply-To: <4366FA9A.20402@yahoo.com.au>

[-- Attachment #1: Type: text/plain, Size: 33 bytes --]

1/3

-- 
SUSE Labs, Novell Inc.


[-- Attachment #2: vm-kswapd-incmin.patch --]
[-- Type: text/plain, Size: 4705 bytes --]

Explicitly teach kswapd about the incremental min logic instead of just scanning
all zones under the first low zone. This should keep more even pressure applied
on the zones.

Signed-off-by: Nick Piggin <npiggin@suse.de>


Index: linux-2.6/mm/vmscan.c
===================================================================
--- linux-2.6.orig/mm/vmscan.c	2005-11-01 13:42:33.000000000 +1100
+++ linux-2.6/mm/vmscan.c	2005-11-01 14:27:16.000000000 +1100
@@ -1051,97 +1051,63 @@ loop_again:
 	}
 
 	for (priority = DEF_PRIORITY; priority >= 0; priority--) {
-		int end_zone = 0;	/* Inclusive.  0 = ZONE_DMA */
 		unsigned long lru_pages = 0;
+		int first_low_zone = 0;
 
 		all_zones_ok = 1;
+		sc.nr_scanned = 0;
+		sc.nr_reclaimed = 0;
+		sc.priority = priority;
+		sc.swap_cluster_max = nr_pages ? nr_pages : SWAP_CLUSTER_MAX;
 
-		if (nr_pages == 0) {
-			/*
-			 * Scan in the highmem->dma direction for the highest
-			 * zone which needs scanning
-			 */
-			for (i = pgdat->nr_zones - 1; i >= 0; i--) {
-				struct zone *zone = pgdat->node_zones + i;
+		/* Scan in the highmem->dma direction */
+		for (i = pgdat->nr_zones - 1; i >= 0; i--) {
+			struct zone *zone = pgdat->node_zones + i;
 
-				if (zone->present_pages == 0)
-					continue;
+			if (zone->present_pages == 0)
+				continue;
 
-				if (zone->all_unreclaimable &&
-						priority != DEF_PRIORITY)
+			if (nr_pages == 0) {	/* Not software suspend */
+				if (zone_watermark_ok(zone, order,
+					zone->pages_high, first_low_zone, 0, 0))
 					continue;
 
-				if (!zone_watermark_ok(zone, order,
-						zone->pages_high, 0, 0, 0)) {
-					end_zone = i;
-					goto scan;
-				}
+				all_zones_ok = 0;
+				if (first_low_zone < i)
+					first_low_zone = i;
 			}
-			goto out;
-		} else {
-			end_zone = pgdat->nr_zones - 1;
-		}
-scan:
-		for (i = 0; i <= end_zone; i++) {
-			struct zone *zone = pgdat->node_zones + i;
-
-			lru_pages += zone->nr_active + zone->nr_inactive;
-		}
-
-		/*
-		 * Now scan the zone in the dma->highmem direction, stopping
-		 * at the last zone which needs scanning.
-		 *
-		 * We do this because the page allocator works in the opposite
-		 * direction.  This prevents the page allocator from allocating
-		 * pages behind kswapd's direction of progress, which would
-		 * cause too much scanning of the lower zones.
-		 */
-		for (i = 0; i <= end_zone; i++) {
-			struct zone *zone = pgdat->node_zones + i;
-			int nr_slab;
-
-			if (zone->present_pages == 0)
-				continue;
 
 			if (zone->all_unreclaimable && priority != DEF_PRIORITY)
 				continue;
 
-			if (nr_pages == 0) {	/* Not software suspend */
-				if (!zone_watermark_ok(zone, order,
-						zone->pages_high, end_zone, 0, 0))
-					all_zones_ok = 0;
-			}
 			zone->temp_priority = priority;
 			if (zone->prev_priority > priority)
 				zone->prev_priority = priority;
-			sc.nr_scanned = 0;
-			sc.nr_reclaimed = 0;
-			sc.priority = priority;
-			sc.swap_cluster_max = nr_pages? nr_pages : SWAP_CLUSTER_MAX;
+			lru_pages += zone->nr_active + zone->nr_inactive;
+
 			atomic_inc(&zone->reclaim_in_progress);
 			shrink_zone(zone, &sc);
 			atomic_dec(&zone->reclaim_in_progress);
-			reclaim_state->reclaimed_slab = 0;
-			nr_slab = shrink_slab(sc.nr_scanned, GFP_KERNEL,
-						lru_pages);
-			sc.nr_reclaimed += reclaim_state->reclaimed_slab;
-			total_reclaimed += sc.nr_reclaimed;
-			total_scanned += sc.nr_scanned;
-			if (zone->all_unreclaimable)
-				continue;
-			if (nr_slab == 0 && zone->pages_scanned >=
+
+			if (zone->pages_scanned >=
 				    (zone->nr_active + zone->nr_inactive) * 4)
 				zone->all_unreclaimable = 1;
-			/*
-			 * If we've done a decent amount of scanning and
-			 * the reclaim ratio is low, start doing writepage
-			 * even in laptop mode
-			 */
-			if (total_scanned > SWAP_CLUSTER_MAX * 2 &&
-			    total_scanned > total_reclaimed+total_reclaimed/2)
-				sc.may_writepage = 1;
 		}
+		reclaim_state->reclaimed_slab = 0;
+		shrink_slab(sc.nr_scanned, GFP_KERNEL, lru_pages);
+		sc.nr_reclaimed += reclaim_state->reclaimed_slab;
+		total_reclaimed += sc.nr_reclaimed;
+		total_scanned += sc.nr_scanned;
+
+		/*
+		 * If we've done a decent amount of scanning and
+		 * the reclaim ratio is low, start doing writepage
+		 * even in laptop mode
+		 */
+		if (total_scanned > SWAP_CLUSTER_MAX * 2 &&
+		    total_scanned > total_reclaimed+total_reclaimed/2)
+			sc.may_writepage = 1;
+
 		if (nr_pages && to_free > total_reclaimed)
 			continue;	/* swsusp: need to do more work */
 		if (all_zones_ok)
@@ -1162,7 +1128,6 @@ scan:
 		if ((total_reclaimed >= SWAP_CLUSTER_MAX) && (!nr_pages))
 			break;
 	}
-out:
 	for (i = 0; i < pgdat->nr_zones; i++) {
 		struct zone *zone = pgdat->node_zones + i;
 

  reply	other threads:[~2005-11-01  5:18 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-11-01  5:18 [PATCH 0/3] better zone and watermark balancing Nick Piggin
2005-11-01  5:19 ` Nick Piggin [this message]
2005-11-01  5:20   ` [PATCH 2/3] vm: highmem watermarks Nick Piggin
2005-11-01  5:21     ` [PATCH 3/3] vm: writeout watermarks Nick Piggin
2005-11-07 15:33       ` Marcelo Tosatti
2005-11-07 21:13         ` Nikita Danilov
2005-11-07 23:12         ` Nick Piggin
2005-11-07 15:28   ` [PATCH 1/3] vm: kswapd incmin Marcelo Tosatti
2005-11-07 23:08     ` Nick Piggin
2005-11-07 18:43       ` Marcelo Tosatti

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4366FAF5.8020908@yahoo.com.au \
    --to=nickpiggin@yahoo.com.au \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.