From mboxrd@z Thu Jan 1 00:00:00 1970 From: r.marek@sh.cvut.cz (Rudolf Marek) Date: Wed, 02 Nov 2005 12:17:04 +0000 Subject: [lm-sensors] Running lm-sensors on EPIA 5000 with Debian SARGE 2.6 Message-Id: <4368A02C.80903@sh.cvut.cz> List-Id: References: <20051012133202.9303523324@box1.planbit.co.uk> In-Reply-To: <20051012133202.9303523324@box1.planbit.co.uk> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Roger Lucas wrote: > Hi Rudolf, > > I have done some digging on my motherboard (a Via Epia 5000). > > http://www.viaembedded.com/product/epia_mini_itx_spec.jsp?motherboardId! > > The processor is a Via EDEN ESP 5000. This has a 533 MHz clock and 1.2v > supply. You can find the datasheet for the chip on the link below (see > section 1.3 on page 7 for the speed/voltage model information). > > http://www.viaembedded.com/product/6/14/Eden20v115.pdf Yes I have read that yesterday. > Fortunately, I am running Debian, so the "apt-get install cupid" worked > smoothly and returned the results below. I have absolutely no idea what > they mean :-) > > edensnake:~# cpuid > eax in eax ebx ecx edx > 00000000 00000001 746e6543 736c7561 48727561 > 00000001 00000673 00000000 00000000 00803135 Family is 6 model 7 stepping 3 0 6 7 0+ something special EDEN ESP samuel 2 This could be also this processor which seems to follow VRM 8.4 instead of VRM8.5. Dig around the datsheets I have and it seems some contradict the other. I think correct would be VRM 8.5 for this case. Regards Rudolf