From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michael Davidson Date: Sun, 06 Nov 2005 20:11:49 +0000 Subject: Re: [LARTC] Cannot get htb & prio working together. Message-Id: <436E6385.3070400@bbd.co.za> List-Id: References: <436A4E6B.6090506@bbd.co.za> In-Reply-To: <436A4E6B.6090506@bbd.co.za> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi Many thanks. Filtering at sub-qdisc and the correct use of the "tc filter show" command was where I was coming short, I'm flying now. Thanks again, Mike D. Jody Shumaker wrote: > Michael Davidson wrote: > >> Hi, >> >> I've tried the multi tier filtering as suggested, but It didn't do >> the trick unfortunately. The filters were accepted at the command >> line but when but when I do "tc -s -d filter show dev eth0" the only >> filters displayed are those with "root" as the parent. Below is my >> current script. >> > That's because that command defaults to showing the root unless you > tell it what to look at. > > tc -s -d filter show dev eth0 parent 20: > > A simple tc filter help lists that. > > - Jody > -- Regards Mike. Michael Davidson Barone Budge & Dominick Email: michael@bbd.co.za Office: +27 11 532 8380 BB&D : +27 11 532 8300 Fax: +27 11 532 8400 Mobile: +27 82 650 5707 Home: +27 11 452 4423 This e-mail is confidential and subject to the disclaimer published at http://www.bbd.co.za _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc