Re: 2.6.14-mm2

[Reuben Farrelly <reuben-lkml@reub.net>]

Hi,

On 11/11/2005 5:35 p.m., Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.14/2.6.14-mm2/
> 
> - reiser4 seems to be broken when built as a module (due, I assume, to a
>   reiser4-specific kbuild change).  CONFIG_REISER4_FS=y will be needed.
> 
> - New git tree git-cfq.patch - CFQ I/O scheduler updates from Jens
> 
> - The git-pcmcia tree has been reinstated
> 
> - git-audit and the several -mm fixups to it have been dropped for now - it's
>   undergoing a bit of churn.
> 
> - Numerous subsystem updates.  Notably more v4l work.

Network is a no-go for me:

[root@tornado ~]# /etc/init.d/network restart
e100: 0000:06:03.0: e100_eeprom_load: EEPROM corrupted
e100: probe of 0000:06:03.0 failed with error -11
sky2 0000:04:00.0: unsupported chip type 0xff
sky2: probe of 0000:04:00.0 failed with error -95

Both drivers worked under 2.6.14-rc5-mm1, but failed with 2.6.14-mm2.  I also 
re-tested against 2.6.14-mm1 and this problem also occurs there (I didn't get 
to test this this far with -mm1, had too many problems with other things and 
been having other hassles such as dsl connection).

Somehow I doubt that these two cards are both genuinely faulty..........I can 
swap out with another e100 if need be.

New config is up at http://www.reub.net/kernel/

Otherwise compiles, starts up and shuts down fine.

Reuben