* Re: [Xenomai-core] Announce: RTDM CAN Device Profile and Driver
2005-11-17 18:11 [Xenomai-core] Announce: RTDM CAN Device Profile and Driver Sebastian Smolorz
@ 2005-11-18 17:02 ` Jan Kiszka
0 siblings, 0 replies; 2+ messages in thread
From: Jan Kiszka @ 2005-11-18 17:02 UTC (permalink / raw)
To: xenomai
[-- Attachment #1: Type: text/plain, Size: 1311 bytes --]
Sebastian Smolorz wrote:
> Hello list,
>
> as a result of a student research project of mine (kind of bachelor
> thesis), here is a CAN device profile for RTDM including a driver for the
> SJA1000-based eNET PHYTEC card. See RT-Add-On-Repository at the University
> of Hannover:
> http://www.rts.uni-hannover.de/mitarbeiter/kiszka/rtaddon/
>
To add a further note to this announcement:
It is planned to extend, or better: break up this driver into a generic
protocol part (socket setup/cleanup, transmission management, demux on
reception, etc.), a controller-specific part, and a eNET-specific
fragment (register addressing). The controller-specific part would be
first for SJA1000, of course. Further controllers could then be added
later. Thus, we aim at a real-time CAN framework which will be open for
a (hopefully) broad hardware support - based on this socket model!
There is nothing like a fixed schedule so far, but I would suggest Q2
2006 as a rather pessimistic goal for the integration of such a
framework into the Xenomai code base. As usual: any active contribution
could significantly speed up such a development! Actually, not so much
work remains, it just has to be a clean break-up and adjustment. And we
need intensive testing...
Have a nice weekend,
Jan
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 250 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread