From: Philippe Gerum <rpm@xenomai.org>
To: "Ashri, Sarit" <Sashri@domain.hid>
Cc: xenomai@xenomai.org
Subject: Re: [Xenomai-help] Problem building MVM: "error: The X11 library '-lX11' could not be found"
Date: Thu, 01 Dec 2005 11:17:11 +0100 [thread overview]
Message-ID: <438ECDA7.6000009@domain.hid> (raw)
In-Reply-To: <8DF1258D5F0FC94EBF5810BF2C7BF2FB3FFC9B@ILEX5.IL.NDS.COM>
Ashri, Sarit wrote:
> Hi,
>
> I'm trying to build Xenomai 2.0.1 with MVM support.
> My target board is PPC and I use patched Linux 2.6.13.4 with it +
> Xenomai 2.0.1 , cross compiled with the flags: ARCH=ppc
> CROSS_COMPILE=ppc_82xx:
The simulator is a _host_ based tool, not a target one, so you don't
want to cross-compile it for your target, it's a native compilation from
and for your build system. Make sure to read sim/README to get the
software package deps, then select the simulation build in the config
menu, and specify a valid path to a GCC-2.95.3 archive as specified.
>
> [.../xenomai-2.0.1/build-sim]$ make ARCH=ppc CROSS_COMPILE=ppc_82xx-
> xeno_srctree=../
> -f ../makefile xconfig
> make[1]: Entering directory
> `/opt/eldk/eldk3.1.1/usr/src/xenomai/xenomai-2.0.1/build-sim/config/kcon
> fig'
> #
> # using defaults found in ../../.xeno_config
> #
> make[1]: Leaving directory
> `/opt/eldk/eldk3.1.1/usr/src/xenomai/xenomai-2.0.1/build-sim/config/kcon
> fig'
> checking build system type... i686-pc-linux-gnu
> checking host system type... powerpc-unknown-linux-gnu
> checking for a BSD-compatible install... /usr/bin/install -c
> checking for powerpc-unknown-linux-gnu-gcc... ppc_82xx-gcc
> ...
> configure: running /bin/sh
> '/opt/src_eldk3.1.1/xenomai/xenomai-2.0.1/sim/configure'
> --prefix=/usr/realtime 'CROSS_COMPILE=ppc_82xx-' 'CC=ppc_82xx-gcc'
> 'CXX=ppc_82xx-g++' 'LD=ppc_82xx-ld' 'AR=ppc_82xx-ar'
> 'RANLIB=ppc_82xx-ranlib' 'STRIP=ppc_82xx-strip' 'NM=ppc_82xx-nm'
> '--build=i686-pc-linux-gnu' '--host=powerpc-unknown-linux-gnu'
> '--with-kconfig-file=.xeno_config' '--with-linux-dir='
> '--prefix=/usr/realtime' 'build_alias=i686-pc-linux-gnu'
> 'host_alias=powerpc-unknown-linux-gnu' --cache-file=/dev/null
> --srcdir=/opt/src_eldk3.1.1/xenomai/xenomai-2.0.1/sim
> checking build system type... i686-pc-linux-gnu
> checking host system type... powerpc-unknown-linux-gnu
> checking for a BSD-compatible install... /usr/bin/install -c
> checking for powerpc-unknown-linux-gnu-gcc... ppc_82xx-gcc
> ...
> checking for C compiler default output file name... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... yes
> checking for suffix of executables...
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether ppc_82xx-gcc accepts -g... yes
> checking for ppc_82xx-gcc option to accept ANSI C... none needed
> checking for powerpc-unknown-linux-gnu-g++... ppc_82xx-g++
> checking whether we are using the GNU C++ compiler... yes
> checking whether ppc_82xx-g++ accepts -g... yes
> checking whether build environment is sane... yes
> checking for gawk... gawk
> checking whether make sets $(MAKE)... yes
> checking for style of include used by make... GNU
> checking for powerpc-unknown-linux-gnu-strip... ppc_82xx-strip
> checking dependency style of ppc_82xx-gcc... gcc3
> checking dependency style of ppc_82xx-g++... gcc3
> checking whether to enable maintainer-specific portions of Makefiles...
> no
> checking for a sed that does not truncate output... /bin/sed
> checking for egrep... grep -E
> checking for ld used by ppc_82xx-gcc... ppc_82xx-ld
> checking if the linker (ppc_82xx-ld) is GNU ld... yes
> checking for ppc_82xx-ld option to reload object files... -r
> checking for BSD-compatible nm... ppc_82xx-nm
> checking whether ln -s works... yes
> checking how to recognise dependent libraries... pass_all
> checking how to run the C preprocessor... ppc_82xx-gcc -E
> checking for ANSI C header files... yes
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for unistd.h... yes
> checking dlfcn.h usability... yes
> checking dlfcn.h presence... yes
> checking for dlfcn.h... yes
> checking how to run the C++ preprocessor... ppc_82xx-g++ -E
> checking for powerpc-unknown-linux-gnu-g77... no
> checking for powerpc-unknown-linux-gnu-f77... no
> checking for powerpc-unknown-linux-gnu-xlf... no
> checking for powerpc-unknown-linux-gnu-frt... no
> checking for powerpc-unknown-linux-gnu-pgf77... no
> checking for powerpc-unknown-linux-gnu-fort77... no
> checking for powerpc-unknown-linux-gnu-fl32... no
> checking for powerpc-unknown-linux-gnu-af77... no
> checking for powerpc-unknown-linux-gnu-f90... no
> checking for powerpc-unknown-linux-gnu-xlf90... no
> checking for powerpc-unknown-linux-gnu-pgf90... no
> checking for powerpc-unknown-linux-gnu-epcf90... no
> checking for powerpc-unknown-linux-gnu-f95... no
> checking for powerpc-unknown-linux-gnu-fort... no
> checking for powerpc-unknown-linux-gnu-xlf95... no
> checking for powerpc-unknown-linux-gnu-ifc... no
> checking for powerpc-unknown-linux-gnu-efc... no
> checking for powerpc-unknown-linux-gnu-pgf95... no
> checking for powerpc-unknown-linux-gnu-lf95... no
> checking for powerpc-unknown-linux-gnu-gfortran... no
> checking for g77... g77
> checking whether we are using the GNU Fortran 77 compiler... yes
> checking whether g77 accepts -g... yes
> checking the maximum length of command line arguments... 32768
> checking command to parse ppc_82xx-nm output from ppc_82xx-gcc object...
> ok
> checking for objdir... .libs
> checking for powerpc-unknown-linux-gnu-ar... ppc_82xx-ar
> checking for powerpc-unknown-linux-gnu-ranlib... ppc_82xx-ranlib
> checking for powerpc-unknown-linux-gnu-strip... (cached) ppc_82xx-strip
> checking if ppc_82xx-gcc static flag works... yes
> checking if ppc_82xx-gcc supports -fno-rtti -fno-exceptions... no
> checking for ppc_82xx-gcc option to produce PIC... -fPIC
> checking if ppc_82xx-gcc PIC flag -fPIC works... yes
> checking if ppc_82xx-gcc supports -c -o file.o... yes
> checking whether the ppc_82xx-gcc linker (ppc_82xx-ld) supports shared
> libraries... yes
> checking whether -lc should be explicitly linked in... no
> checking dynamic linker characteristics... GNU/Linux ld.so
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> configure: creating libtool
> appending configuration tag "CXX" to libtool
> checking for ld used by ppc_82xx-g++... ppc_82xx-ld
> checking if the linker (ppc_82xx-ld) is GNU ld... yes
> checking whether the ppc_82xx-g++ linker (ppc_82xx-ld) supports shared
> libraries... yes
> checking for ppc_82xx-g++ option to produce PIC... -fPIC
> checking if ppc_82xx-g++ PIC flag -fPIC works... yes
> checking if ppc_82xx-g++ supports -c -o file.o... yes
> checking whether the ppc_82xx-g++ linker (ppc_82xx-ld) supports shared
> libraries... yes
> checking dynamic linker characteristics... GNU/Linux ld.so
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> appending configuration tag "F77" to libtool
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for g77 option to produce PIC... -fPIC
> checking if g77 PIC flag -fPIC works... yes
> checking if g77 supports -c -o file.o... yes
> checking whether the g77 linker (ppc_82xx-ld) supports shared
> libraries... yes
> checking dynamic linker characteristics... GNU/Linux ld.so
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking for flex... flex
> checking for yywrap in -lfl... yes
> checking lex output file root... lex.yy
> checking whether yytext is a pointer... yes
> checking for Xenomai installation directory... /usr/realtime
> checking for MVM debug support... no
> checking for MVM atomic core mode... no
> checking for statistics collection in nucleus... y
> checking for Xenomai nucleus debug support... no
> checking for GCC tarball... /tmp/gcc-2.95.3.tar.bz2
> checking Wrap Tcl-scripts in executables... no
> checking for pSOS+ simulator... y
> checking for VxWorks simulator... y
> checking for VRTX simulator... y
> checking for uITRON simulator... y
> checking for POSIX simulator... y
> checking for native API simulator... y
> checking for RTAI simulator... y
> checking if C compiler is GNU C... yes
> checking if C compiler supports -fwritable-strings
> -fdollars-in-identifiers... yes
> checking if C++ compiler is GNU C++... yes
> checking if C++ compiler supports -fno-exceptions... yes
> checking if C++ compiler supports -fnonnull-objects... no
> checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include
> checking for dnet_ntoa in -ldnet... no
> checking for dnet_ntoa in -ldnet_stub... no
> checking for gethostbyname... yes
> checking for connect... yes
> checking for remove... yes
> checking for shmat... yes
> checking for IceConnectionNumber in -lICE... no
> checking for XOpenDisplay in -lX11... no
> configure: error: The X11 library '-lX11' could not be found,
> so I won't go further. Please use the configure
> options '--x-includes=DIR' and '--x-libraries=DIR'
> to specify the X location. See the file 'config.log'
> for further diagnostics.
> configure: error: /bin/sh
> '/opt/src_eldk3.1.1/xenomai/xenomai-2.0.1/sim/configure' failed for sim
> make: *** [config.status] Error 1
>
> *************************
>>From config.log file:
> *************************
> This file contains any messages produced by compilers while
> running configure, to aid debugging if configure makes a mistake.
>
> It was created by Xenomai configure 2.0.1, which was
> generated by GNU Autoconf 2.59. Invocation command line was
>
> $ /opt/src_eldk3.1.1/xenomai/xenomai-2.0.1/configure
> CROSS_COMPILE=ppc_82xx- CC=ppc_82xx-gcc CXX=ppc_82xx-g++ LD=ppc_82xx-ld
> AR=ppc_82xx-ar RANLIB=ppc_82xx-ranlib STRIP=ppc_82xx-strip
> NM=ppc_82xx-nm --build=i686-pc-linux-gnu
> --host=powerpc-unknown-linux-gnu --with-kconfig-file=.xeno_config
> --with-linux-dir= --prefix=/usr/realtime
>
> ## --------- ##
> ## Platform. ##
> ## --------- ##
>
> hostname = sashri-lin
> uname -m = i686
> uname -r = 2.4.21-32.EL
> uname -s = Linux
> uname -v = #1 Fri Apr 15 21:29:19 EDT 2005
>
> /usr/bin/uname -p = unknown
> /bin/uname -X = unknown
>
> /bin/arch = i686
> /usr/bin/arch -k = unknown
> /usr/convex/getsysinfo = unknown
> hostinfo = unknown
> /bin/machine = unknown
> /usr/bin/oslevel = unknown
> /bin/universe = unknown
>
> PATH: /users/sashri/bin
> PATH: /home/oracle/orahome/bin
> PATH: /usr/kerberos/bin
> PATH: /bin
> PATH: /usr/bin
> PATH: /usr/bin/X11
> PATH: /usr/local/bin
> PATH: /usr/bin
> PATH: /usr/X11R6/bin
> PATH: ../bin
> PATH: /usr/bin/X11
> PATH: /usr/contrib/bin/X11
> PATH: /users/bin
> PATH: .
> PATH: /usr/softbench/bin
> PATH: /etc
> PATH: /sbin
> PATH: /opt/eldk/eldk3.1.1/usr/bin
> PATH: /opt/eldk/eldk3.1.1/bin
> PATH: //opt/eldk/eldk3.1.1/ppc_82xx/usr/realtime/bin
> PATH: /sbin
> ...
> config.status:1546: executing depfiles commands
> configure:25617: configuring in sim
> configure:25734: running /bin/sh
> '/opt/src_eldk3.1.1/xenomai/xenomai-2.0.1/sim/configure'
> --prefix=/usr/realtime 'CROSS_COMPILE=ppc_82xx-' 'CC=ppc_82xx-gcc'
> 'CXX=ppc_82xx-g++' 'LD=ppc_82xx-ld' 'AR=ppc_82xx-ar'
> 'RANLIB=ppc_82xx-ranlib' 'STRIP=ppc_82xx-strip' 'NM=ppc_82xx-nm'
> '--build=i686-pc-linux-gnu' '--host=powerpc-unknown-linux-gnu'
> '--with-kconfig-file=.xeno_config' '--with-linux-dir='
> '--prefix=/usr/realtime' 'build_alias=i686-pc-linux-gnu'
> 'host_alias=powerpc-unknown-linux-gnu' --cache-file=/dev/null
> --srcdir=/opt/src_eldk3.1.1/xenomai/xenomai-2.0.1/sim
> configure:25739: error: /bin/sh
> '/opt/src_eldk3.1.1/xenomai/xenomai-2.0.1/sim/configure' failed for sim
> ...
> configure: exit 1
>
> I'll appreciate any help you can give me
> Thanks,
> Sarit.
>
>
> ***********************************************************************************
> This email message and any attachments thereto are intended only for use by the addressee(s) named above, and may contain legally privileged and/or confidential information. If the reader of this message is not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify the postmaster@domain.hid and destroy the original message.
> ***********************************************************************************
>
> _______________________________________________
> Xenomai-help mailing list
> Xenomai-help@domain.hid
> https://mail.gna.org/listinfo/xenomai-help
>
--
Philippe.
next prev parent reply other threads:[~2005-12-01 10:17 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-01 9:48 [Xenomai-help] Problem building MVM: "error: The X11 library '-lX11' could not be found" Ashri, Sarit
2005-12-01 10:17 ` Philippe Gerum [this message]
2005-12-01 10:23 ` Philippe Gerum
-- strict thread matches above, loose matches on Subject: below --
2005-12-01 11:14 Ashri, Sarit
2005-12-01 11:22 ` Philippe Gerum
2005-12-01 12:24 ` Gilles Chanteperdrix
2005-12-01 12:34 Ashri, Sarit
2005-12-01 12:51 ` Philippe Gerum
2005-12-04 12:45 Ashri, Sarit
2005-12-04 18:16 ` Philippe Gerum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=438ECDA7.6000009@domain.hid \
--to=rpm@xenomai.org \
--cc=Sashri@domain.hid \
--cc=xenomai@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.