From: Pierre Ossman <drzeus@drzeus.cx>
To: Jordan Crouse <jordan.crouse@amd.com>
Cc: linux-mips@linux-mips.org, ralf@linux-mips.org,
Russell King <rmk+lkml@arm.linux.org.uk>
Subject: Re: [PATCH] ALCHEMY: Add SD support to AU1200 MMC/SD driver
Date: Fri, 02 Dec 2005 20:42:02 +0100 [thread overview]
Message-ID: <4390A38A.1010907@drzeus.cx> (raw)
In-Reply-To: <20051202190108.GF28227@cosmic.amd.com>
Jordan Crouse wrote:
> Add SD support to the AU1200 MMC driver. This can
> be added post 2.6.15, I'm just sending them out today so the various
> maintainers can get them queued up.
>
> Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
> ---
>
> drivers/mmc/au1xmmc.c | 124 ++++++++++++++++++++++++++++---------------------
> 1 files changed, 71 insertions(+), 53 deletions(-)
>
Russell is still the maintainer of the MMC layer. :)
I still have some comments though.
> @@ -124,8 +132,8 @@ static inline void IRQ_OFF(struct au1xmm
> static inline void SEND_STOP(struct au1xmmc_host *host)
> {
>
> - /* We know the value of CONFIG2, so avoid a read we don't need */
> - u32 mask = SD_CONFIG2_EN;
> + /* Penalty box for Jordan - NEVER ASSUME! */
> + u32 mask = au_readl(HOST_CONFIG2(host));
>
> WARN_ON(host->status != HOST_S_DATA);
> host->status = HOST_S_STOP;
This comment will be terribly confusing to anyone reading your code.
> @@ -196,7 +207,11 @@ static int au1xmmc_send_command(struct a
>
> switch(cmd->flags) {
> case MMC_RSP_R1:
> - mmccmd |= SD_CMD_RT_1;
> + if (cmd->opcode == 0x03 && host->mmc->mode == MMC_MODE_SD)
> + mmccmd |= SD_CMD_RT_6;
> + else
> + mmccmd |= SD_CMD_RT_1;
> +
> break;
> case MMC_RSP_R1B:
> mmccmd |= SD_CMD_RT_1B;
No, no, no! Even if this wasn't already fixed in the current kernel you
never hack around bugs in other parts of the kernel, you fix them!
> @@ -504,8 +519,8 @@ static void au1xmmc_cmd_complete(struct
> r[3] = au_readl(host->iobase + SD_RESP0);
>
> /* The CRC is omitted from the response, so really we only got
> - * 120 bytes, but the engine expects 128 bits, so we have to shift
> - * things up
> + * 120 bytes, but the engine expects 128 bits, so we have to
> + * shift things up
> */
>
> for(i = 0; i < 4; i++) {
s/bytes/bits/
> @@ -611,7 +635,7 @@ au1xmmc_prepare_data(struct au1xmmc_host
>
> int len = (datalen > sg_len) ? sg_len : datalen;
>
> - if (i == host->dma.len - 1)
> + if (i == (host->dma.len - 1))
> flags = DDMA_FLAGS_IE;
>
> if (host->flags & HOST_F_XMIT){
broken indentation.
> @@ -627,23 +651,11 @@ au1xmmc_prepare_data(struct au1xmmc_host
> len, flags);
> }
>
> - if (!ret)
> + if (ret == 0)
> goto dataerr;
>
> datalen -= len;
> }
> - }
> - else {
> - host->pio.index = 0;
> - host->pio.offset = 0;
> - host->pio.len = datalen;
> -
> - if (host->flags & HOST_F_XMIT)
> - IRQ_ON(host, SD_CONFIG_TH);
> - else
> - IRQ_ON(host, SD_CONFIG_NE);
> - //IRQ_ON(host, SD_CONFIG_RA|SD_CONFIG_RF);
> - }
>
> return MMC_ERR_NONE;
>
Here aswell. And it seems the block above will get the wrong indentation.
Rgds
Pierre
next prev parent reply other threads:[~2005-12-02 19:38 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-02 19:01 [PATCH] ALCHEMY: Add SD support to AU1200 MMC/SD driver Jordan Crouse
2005-12-02 19:42 ` Pierre Ossman [this message]
2005-12-02 19:45 ` Russell King
2005-12-02 21:17 ` Jordan Crouse
2005-12-02 22:05 ` Pierre Ossman
2005-12-14 13:41 ` [PATCH] " Rodolfo Giometti
2005-12-14 15:53 ` Jordan Crouse
2006-01-09 17:45 ` Rodolfo Giometti
2006-01-09 18:19 ` Jordan Crouse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4390A38A.1010907@drzeus.cx \
--to=drzeus@drzeus.cx \
--cc=jordan.crouse@amd.com \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
--cc=rmk+lkml@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.