From: Jeff Garzik <jgarzik@pobox.com>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Cc: Greg KH <gregkh@suse.de>, Matthew Wilcox <matthew@wil.cx>,
"Brown, Len" <len.brown@intel.com>
Subject: [2.6.15-rc4] oops in acpiphp
Date: Fri, 02 Dec 2005 16:01:58 -0500 [thread overview]
Message-ID: <4390B646.60709@pobox.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 607 bytes --]
Booting with acpiphp on this dual core, dual package (2x2) box causes an
oops.
Attachments:
oops.txt: get right to the heart of the matter
dmesg.dead.txt: entire dmesg from failing kernel
dmesg.alive.txt: entire dmesg from successful kernel
config.txt: kernel config
lspci.txt: output of 'lspci'
lspciv.txt: output of 'lspci -nvvv'
The kernel tree used is 2.6.15-rc4 + git stuff. TOT is
deda498710e190c7922c2634ed630ee64ce86c05.
acpidmp output is also available at
http://gtf.org/garzik/misc/acpidmp.out.txt
Let me know if there is any additional info I can provide, or tests to
perform.
Jeff
[-- Attachment #2: oops.txt --]
[-- Type: text/plain, Size: 7431 bytes --]
Bootdata ok (command line is ro root=LABEL=/ nogui console=ttyS0,38400)
Linux version 2.6.15-rc4acpiphp1-gdeda4987 (jgarzik@viper.yyz.us) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 SMP Fri Dec 2 15:35:47 EST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff9300 (usable)
BIOS-e820: 000000007fff9300 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 0-40000000
SRAT: Node 1 PXM 1 40000000-80000000
Bootmem setup node 0 0000000000000000-0000000040000000
Bootmem setup node 1 0000000040000000-000000007fff9000
Nvidia board detected. Ignoring ACPI timer override.
ACPI: PM-Timer IO Port: 0xf808
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Processor #3 15:1 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xf2700000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 17, address 0xf2700000, GSI 24-27
ACPI: IOAPIC (id[0x0a] address[0xf2701000] gsi_base[28])
IOAPIC[2]: apic_id 10, version 17, address 0xf2701000, GSI 28-31
ACPI: IOAPIC (id[0x0b] address[0xf2800000] gsi_base[32])
IOAPIC[3]: apic_id 11, version 17, address 0xf2800000, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Checking aperture...
CPU 0: aperture @ 42a0000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
Built 2 zonelists
[...]
ACPI: bus type pci registered
PCI: Using configuration type 1
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Root Bridge [PCI1] (0000:40)
ACPI: PCI Root Bridge [PCI2] (0000:80)
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *5
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNKW] (IRQs *48), disabled.
ACPI: PCI Interrupt Link [LNKX] (IRQs *49), disabled.
ACPI: PCI Interrupt Link [LNKY] (IRQs *50), disabled.
ACPI: PCI Interrupt Link [LNKZ] (IRQs *51), disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSB0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSB2] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-DMA: Disabling IOMMU.
pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0a: ioport range 0x400-0x47f could not be reserved
pnp: 00:0a: ioport range 0x480-0x48f has been reserved
pnp: 00:0a: ioport range 0xf800-0xf87f could not be reserved
pnp: 00:0a: ioport range 0xf880-0xf8ff has been reserved
pnp: 00:0a: ioport range 0xf900-0xf97f has been reserved
pnp: 00:0a: ioport range 0xf980-0xf9ff has been reserved
pnp: 00:0a: ioport range 0xfa00-0xfa7f has been reserved
pnp: 00:0a: ioport range 0xfa80-0xfaff has been reserved
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: f2000000-f20fffff
PREFETCH window: disabled.
PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:0a:00.0
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: f0000000-f1ffffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:40:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:40:02.0
IO window: 1000-1fff
MEM window: f2200000-f26fffff
PREFETCH window: 88000000-882fffff
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1133556420.240:1): initialized
Total HugeTLB memory allocated, 0
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
PCI: MSI quirk detected. pci_msi_quirk set.
PCI: MSI quirk detected. pci_msi_quirk set.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Badness in kref_get at lib/kref.c:32
Call Trace:<ffffffff801eebae>{kref_get+46} <ffffffff801eddd2>{kobject_get+18}
<ffffffff80274de4>{get_bus+20} <ffffffff80275446>{bus_add_driver+38}
<ffffffff8045b0dc>{pcied_init+188} <ffffffff8010b232>{init+482}
<ffffffff8010eb9e>{child_rip+8} <ffffffff8010b050>{init+0}
<ffffffff8010eb96>{child_rip+0}
Badness in kref_get at lib/kref.c:32
Call Trace:<ffffffff801eebae>{kref_get+46} <ffffffff801eddd2>{kobject_get+18}
<ffffffff801ee22b>{kobject_init+43} <ffffffff801ee310>{kobject_register+32}
<ffffffff80275485>{bus_add_driver+101} <ffffffff8045b0dc>{pcied_init+188}
<ffffffff8010b232>{init+482} <ffffffff8010eb9e>{child_rip+8}
<ffffffff8010b050>{init+0} <ffffffff8010eb96>{child_rip+0}
BUG: soft lockup detected on CPU#3!
CPU 3:
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.15-rc4acpiphp1-gdeda4987 #1
RIP: 0010:[<ffffffff80310439>] <ffffffff80310439>{.text.lock.spinlock+0}
RSP: 0000:ffff81007ffdbea0 EFLAGS: 00000286
RAX: ffffffff80388000 RBX: ffffffff80147f5a RCX: 00000000000029e5
RDX: 00000000ffffff01 RSI: 0000000000000246 RDI: ffffffff80388020
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000034 R11: 000000000000000a R12: 0000000000000000
R13: ffffffff8033d171 R14: ffffffff801522ea R15: 0000000000000292
FS: 0000000000587850(0000) GS:ffffffff80437980(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000583438 CR3: 0000000000101000 CR4: 00000000000006e0
Call Trace:<ffffffff801ee02e>{kobject_add+94} <ffffffff801ee318>{kobject_register+40}
<ffffffff80275485>{bus_add_driver+101} <ffffffff8045b0dc>{pcied_init+188}
<ffffffff8010b232>{init+482} <ffffffff8010eb9e>{child_rip+8}
<ffffffff8010b050>{init+0} <ffffffff8010eb96>{child_rip+0}
BUG: soft lockup detected on CPU#3!
[repeats]
[-- Attachment #3: dmesg.dead.txt.bz2 --]
[-- Type: application/x-bzip2, Size: 3670 bytes --]
[-- Attachment #4: dmesg.alive.txt.bz2 --]
[-- Type: application/x-bzip2, Size: 5768 bytes --]
[-- Attachment #5: config.txt.bz2 --]
[-- Type: application/x-bzip2, Size: 7016 bytes --]
[-- Attachment #6: lspci.txt.bz2 --]
[-- Type: application/x-bzip2, Size: 805 bytes --]
[-- Attachment #7: lspciv.txt.bz2 --]
[-- Type: application/x-bzip2, Size: 3566 bytes --]
next reply other threads:[~2005-12-02 21:02 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-02 21:01 Jeff Garzik [this message]
2005-12-02 21:40 ` [2.6.15-rc4] oops in acpiphp Greg KH
2005-12-02 21:48 ` Jeff Garzik
2005-12-02 21:45 ` Rajesh Shah
2005-12-02 21:46 ` Greg KH
2005-12-02 21:57 ` Rajesh Shah
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4390B646.60709@pobox.com \
--to=jgarzik@pobox.com \
--cc=gregkh@suse.de \
--cc=len.brown@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=matthew@wil.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.