Re: Adaptec aic79xx performance

All of lore.kernel.org
 help / color / mirror / Atom feed

From: Denny Page <denny@cococafe.com>
To: Linux SCSI Mailing List <linux-scsi@vger.kernel.org>
Subject: Re: Adaptec aic79xx performance
Date: Sat, 03 Dec 2005 03:04:54 -0800	[thread overview]
Message-ID: <43917BD6.8080505@cococafe.com> (raw)
In-Reply-To: <439165A1.8070900@cococafe.com>

Boot verbose output for the aic79xx controller follows.

Denny

-----

Dec  3 02:46:07 marvin ahd_pci:6:1:0: Reading VPD from 
SEEPROM...ahd_pci:6:1:0: VPD parsing successful
Dec  3 02:46:07 marvin ahd_pci:6:1:0: Reading SEEPROM...done.
Dec  3 02:46:07 marvin ahd_pci:6:1:0: STPWLEVEL is on
Dec  3 02:46:07 marvin ahd_pci:6:1:0: Manual Primary Termination
Dec  3 02:46:07 marvin ahd_pci:6:1:0: Manual Secondary Termination
Dec  3 02:46:07 marvin ahd_pci:6:1:0: Primary High byte termination Disabled
Dec  3 02:46:07 marvin ahd_pci:6:1:0: Primary Low byte termination Enabled
Dec  3 02:46:07 marvin ahd_pci:6:1:0: Secondary High byte termination 
Disabled
Dec  3 02:46:07 marvin ahd_pci:6:1:0: Secondary Low byte termination 
Disabled
Dec  3 02:46:07 marvin ahd_pci:6:1:0: Downloading Sequencer Program... 
650 instructions downloaded
Dec  3 02:46:07 marvin ahd_pci:6:1:0: Features 0x3c001, Bugs 0x500000, 
Flags 0x3d1
Dec  3 02:46:07 marvin scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, 
Rev 1.3.11
Dec  3 02:46:07 marvin <Adaptec 29320ALP Ultra320 SCSI adapter>
Dec  3 02:46:07 marvin aic7901: Ultra320 Wide Channel A, SCSI Id=7, 
PCI-X 101-133Mhz, 512 SCBs
Dec  3 02:46:07 marvin
Dec  3 02:46:07 marvin scsi0: Slave Alloc 0
Dec  3 02:46:07 marvin scsi0: Slave Destroy 0
Dec  3 02:46:07 marvin scsi0: Slave Alloc 1
Dec  3 02:46:07 marvin scsi0: Slave Destroy 1
Dec  3 02:46:07 marvin scsi0: Slave Alloc 2
Dec  3 02:46:07 marvin scsi0: Slave Destroy 2
Dec  3 02:46:07 marvin scsi0: Slave Alloc 3
Dec  3 02:46:07 marvin Vendor: HP        Model: Ultrium 2-SCSI    Rev: F5CD
Dec  3 02:46:07 marvin Type:   Sequential-Access                  ANSI 
SCSI revision: 03
Dec  3 02:46:07 marvin scsi0: Slave Configure 3
Dec  3 02:46:07 marvin target0:0:3: asynchronous.
Dec  3 02:46:07 marvin target0:0:3: Beginning Domain Validation
Dec  3 02:46:07 marvin (scsi0:A:3:0): Sending WDTR 1
Dec  3 02:46:07 marvin (scsi0:A:3:0): Received WDTR 1 filtered to 1
Dec  3 02:46:07 marvin target0:0:3: FAST-5 WIDE SCSI 2.0 MB/s ST (1020 
ns, offset 255)
Dec  3 02:46:07 marvin scsi0: target 3 using 16bit transfers
Dec  3 02:46:07 marvin (scsi0:A:3:0): Sending SDTR period 44, offset 0
Dec  3 02:46:07 marvin (scsi0:A:3:0): Received SDTR period 44, offset 0
Dec  3 02:46:07 marvin 	Filtered to period 0, offset 0
Dec  3 02:46:07 marvin target0:0:3: wide asynchronous.
Dec  3 02:46:07 marvin scsi0: target 3 using asynchronous transfers
Dec  3 02:46:07 marvin (scsi0:A:3:0): Sending WDTR 1
Dec  3 02:46:07 marvin (scsi0:A:3:0): Received WDTR 1 filtered to 1
Dec  3 02:46:07 marvin target0:0:3: FAST-5 WIDE SCSI 2.0 MB/s ST (1020 
ns, offset 255)
Dec  3 02:46:07 marvin scsi0: target 3 using 16bit transfers
Dec  3 02:46:07 marvin (scsi0:A:3:0): Sending SDTR period 44, offset 0
Dec  3 02:46:07 marvin (scsi0:A:3:0): Received SDTR period 44, offset 0
Dec  3 02:46:07 marvin 	Filtered to period 0, offset 0
Dec  3 02:46:07 marvin target0:0:3: wide asynchronous.
Dec  3 02:46:07 marvin scsi0: target 3 using asynchronous transfers
Dec  3 02:46:07 marvin (scsi0:A:3:0): Sending WDTR 1
Dec  3 02:46:07 marvin (scsi0:A:3:0): Received WDTR 1 filtered to 1
Dec  3 02:46:07 marvin target0:0:3: FAST-5 WIDE SCSI 2.0 MB/s ST (1020 
ns, offset 255)
Dec  3 02:46:07 marvin scsi0: target 3 using 16bit transfers
Dec  3 02:46:07 marvin (scsi0:A:3:0): Sending SDTR period 44, offset 0
Dec  3 02:46:07 marvin (scsi0:A:3:0): Received SDTR period 44, offset 0
Dec  3 02:46:07 marvin 	Filtered to period 0, offset 0
Dec  3 02:46:07 marvin target0:0:3: wide asynchronous.
Dec  3 02:46:07 marvin scsi0: target 3 using asynchronous transfers
Dec  3 02:46:07 marvin (scsi0:A:3:0): Sending WDTR 1
Dec  3 02:46:07 marvin (scsi0:A:3:0): Received WDTR 1 filtered to 1
Dec  3 02:46:07 marvin target0:0:3: FAST-5 WIDE SCSI 2.0 MB/s ST (1020 
ns, offset 255)
Dec  3 02:46:07 marvin scsi0: target 3 using 16bit transfers
Dec  3 02:46:07 marvin (scsi0:A:3:0): Sending SDTR period 44, offset 0
Dec  3 02:46:07 marvin (scsi0:A:3:0): Received SDTR period 44, offset 0
Dec  3 02:46:07 marvin 	Filtered to period 0, offset 0
Dec  3 02:46:07 marvin target0:0:3: wide asynchronous.
Dec  3 02:46:07 marvin scsi0: target 3 using asynchronous transfers
Dec  3 02:46:07 marvin (scsi0:A:3:0): Sending WDTR 1
Dec  3 02:46:07 marvin (scsi0:A:3:0): Received WDTR 1 filtered to 1
Dec  3 02:46:07 marvin target0:0:3: FAST-5 WIDE SCSI 2.0 MB/s ST (1020 
ns, offset 255)
Dec  3 02:46:07 marvin scsi0: target 3 using 16bit transfers
Dec  3 02:46:07 marvin (scsi0:A:3:0): Sending SDTR period 44, offset 0
Dec  3 02:46:07 marvin (scsi0:A:3:0): Received SDTR period 44, offset 0
Dec  3 02:46:07 marvin 	Filtered to period 0, offset 0
Dec  3 02:46:07 marvin target0:0:3: wide asynchronous.
Dec  3 02:46:07 marvin scsi0: target 3 using asynchronous transfers
Dec  3 02:46:07 marvin target0:0:3: Domain Validation skipping write tests
Dec  3 02:46:07 marvin (scsi0:A:3:0): Sending PPR bus_width 1, period 8, 
offset fe, ppr_options f3
Dec  3 02:46:07 marvin (scsi0:A:3:0): Received PPR width 1, period 9, 
offset fe,options 2
Dec  3 02:46:07 marvin 	Filtered to width 0, period 0, offset 0, options 0
Dec  3 02:46:07 marvin target0:0:3: asynchronous.
Dec  3 02:46:07 marvin scsi0: target 3 using 8bit transfers
Dec  3 02:46:07 marvin target0:0:3: Ending Domain Validation
Dec  3 02:46:07 marvin scsi0: Slave Alloc 4
Dec  3 02:46:07 marvin scsi0: Slave Destroy 4
Dec  3 02:46:07 marvin scsi0: Slave Alloc 5
Dec  3 02:46:07 marvin scsi0: Slave Destroy 5
Dec  3 02:46:07 marvin scsi0: Slave Alloc 6
Dec  3 02:46:07 marvin scsi0: Slave Destroy 6
Dec  3 02:46:07 marvin scsi0: Slave Alloc 8
Dec  3 02:46:07 marvin scsi0: Slave Destroy 8
Dec  3 02:46:07 marvin scsi0: Slave Alloc 9
Dec  3 02:46:07 marvin scsi0: Slave Destroy 9
Dec  3 02:46:07 marvin scsi0: Slave Alloc 10
Dec  3 02:46:07 marvin scsi0: Slave Destroy 10
Dec  3 02:46:07 marvin scsi0: Slave Alloc 11
Dec  3 02:46:07 marvin scsi0: Slave Destroy 11
Dec  3 02:46:07 marvin scsi0: Slave Alloc 12
Dec  3 02:46:07 marvin scsi0: Slave Destroy 12
Dec  3 02:46:07 marvin scsi0: Slave Alloc 13
Dec  3 02:46:07 marvin scsi0: Slave Destroy 13
Dec  3 02:46:07 marvin scsi0: Slave Alloc 14
Dec  3 02:46:07 marvin scsi0: Slave Destroy 14
Dec  3 02:46:07 marvin scsi0: Slave Alloc 15
Dec  3 02:46:07 marvin scsi0: Slave Destroy 15

     prev parent reply	other threads:[~2005-12-03 11:05 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-12-03  9:30 Adaptec aic79xx performance Denny Page
2005-12-03 10:01 ` Denny Page
2005-12-04  2:44   ` Denny Page
2005-12-08 20:50     ` Denny Page
2005-12-03 11:04 ` Denny Page [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=43917BD6.8080505@cococafe.com \
    --to=denny@cococafe.com \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.