From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sophana Kok Date: Wed, 07 Dec 2005 15:30:06 +0000 Subject: Re: [LARTC] shaping small rates Message-Id: <4396FFFE.8060507@yahoo.fr> List-Id: References: <4396075E.7090607@ostrow-wlkp.eu.org> In-Reply-To: <4396075E.7090607@ostrow-wlkp.eu.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org What do you call few seconds delay? What is your link speed, and rates? Damian Jakubowski wrote: > What traffic shaper must I use to shape small rates (~1kBps) without > significant latency? I have experience with htb and i now that htb is > not very good solution in this case. With so low rates it generates a > few seconds delays beetwen sended packets. Such situation is described > on htb homepage, but without solution. > Any ideas ? > > JQu > _______________________________________________ > LARTC mailing list > LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc