From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S964961AbVLJI7y (ORCPT ); Sat, 10 Dec 2005 03:59:54 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S965089AbVLJI7y (ORCPT ); Sat, 10 Dec 2005 03:59:54 -0500 Received: from smtp3.wanadoo.fr ([193.252.22.28]:9339 "EHLO smtp3.wanadoo.fr") by vger.kernel.org with ESMTP id S964961AbVLJI7w (ORCPT ); Sat, 10 Dec 2005 03:59:52 -0500 X-ME-UUID: 20051210085942422.673331C0034B@mwinf0306.wanadoo.fr Message-ID: <439A9973.6050009@wanadoo.fr> Date: Sat, 10 Dec 2005 10:01:39 +0100 From: mahashakti89 Reply-To: mahashakti89@wanadoo.fr Organization: none User-Agent: Mozilla Thunderbird 1.0.7 (X11/20051017) X-Accept-Language: fr, en MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Cc: mahashakti89@wanadoo.fr Subject: udev problem ... X-Enigmail-Version: 0.93.0.0 Content-Type: text/plain; charset=ISO-8859-15 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi ! Here is a report bug I posted on bugs@debian.org , we'll make it short , I cannot activate udev at boot , if I do this I get IDE errors on both harddisks and if I can enter an X-session, I cannot open a terminal : I get following error message : "there was a problem with the child process of this terminal" . If I desactivate udev at boot, eveything is going O.K. The Debian package maintainer thinks it looks like a kernel bug .... This is why I am posting here hoping for help in this matter. mahashakti89 PS : Could you CC me your answer, I am not on the list . THANKS Package : udev Version : 0.076-3 #dpkg --status udev Package Package : udev Version:0.076-3 Status: install ok installed Priority: optional Section: admin Installed-Size: 960 Maintainer: Marco d'Itri Architecture: i386 Version: 0.076-3 Provides: hotplug Depends: libc6 (>= 2.3.5-1), libselinux1 (>= 1.26), libsepol1 (>= 1.8), initscripts (>= 2.85-16), makedev (>= 2.3.1-77), sed (>= 3.95), lsb-base (>= 3.0-6) Conflicts: lvm-common (<< 1.5.13), hotplug, module-init-tools (<< 3.2-pre9-1), initramfs-tools (<< 0.39) Description: /dev/ and hotplug management daemon udev is a daemon which dynamically creates and removes device nodes from /dev/, handles hotplug events and loads drivers at boot time. It replaces the hotplug package and requires a kernel not older than 2.6.12. II.Descritpion If I activate udev at boot through some utility like sysvconfig or sysvconfig I have problem with both IDE Disks (Maxtor 80 G0 and 250 G0) , I get following error message : Drive Seek Complete Data Request, Satus 0x 58, Drive not Ready for command , and sometimes I cannot log into an X-session. If I can log in, I cannot open a terminal - gnome-terminal , konsole, xterm - I get following error message : There was a problem with the child process of this terminal. It is then impossible to type any command. If I desactivate udev at boot , everything is O.K , no IDE-errors , no problems with gnme-terminal, konsole or xterm. III. Informations KERNEL VERSION : /home/claude# uname -a Linux ishwara 2.6.14-ck6 #1 SMP Sun Nov 27 10:05:42 CET 2005 i686 GNU/Linux LIBC6 VERSION : :/home/claude# dpkg -s libc6 | grep ^Version Version: 2.3.5-8.1 HARDWARE : Processor = Pentium IV Motherboard = ASUS P4P800 Chipset = I865 PE Harddisk 1 = hdparm -i /dev/hda /dev/hda: Model=Maxtor 6Y080P0, FwRev=YAR41BW0, SerialNo=Y31PPXDE Config={ Fixed } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57 BuffType=DualPortCache, BuffSize=7936kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160086528 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma6 AdvancedPM=yes: disabled (255) WriteCache=enabled Drive conforms to: (null): ATA/ATAPI-1 ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6 ATA/ATAPI-7 * signifies the current active mode Harddisk 2 = hdparm -i /dev/hdb /dev/hdb: Model=Maxtor 6L250R0, FwRev=BAH41G10, SerialNo=L6132M9H Config={ Fixed } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57 BuffType=DualPortCache, BuffSize=16384kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma6 AdvancedPM=yes: disabled (255) WriteCache=enabled Drive conforms to: (null): ATA/ATAPI-1 ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6 ATA/ATAPI-7 * signifies the current active mode I didn't touch the basic configuration files of udev except some personal rules for my modem and USB-Sticks. Hope you understand my english. Thanks mahashakti89 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDmplyPPuyRSaD7LoRAk7DAJ0ddxljwM2pRCLCB1ZZPaeeG23vvgCgiM7c bw2MG2i6kDy2zM0xxV7jbNk= =1uMy -----END PGP SIGNATURE-----