From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <439F1372.4060103@phreaker.net> Date: Wed, 14 Dec 2005 02:31:14 +0800 From: ro0ot MIME-Version: 1.0 References: <57F9959B46E0FA4D8BA88AEDFBE582900B59D2@pxtbenexd01.pxt.primeexalia.com> In-Reply-To: <57F9959B46E0FA4D8BA88AEDFBE582900B59D2@pxtbenexd01.pxt.primeexalia.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: [Bridge] Re: Bridging Firewall with Kernel 2.6 failed List-Id: Linux Ethernet Bridging List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: bridge@lists.osdl.org Hi Gary, All the commands I ran did not show any failing messages. The traffic doesn't seems passing through the bridge, why? Do I need "physdev" in iptables to get bridging firewall work? Gary W. Smith wrote: >Hi ro0ot, > >Exactly what part of "doesn't work anymore" doesn't work? Does it not >work when you create the bridge or does it not work after you apply >iptables? What commands are you running to instantiate the bridge? >What commands do you think are failing? > >Gary Wayne Smith > > > >>-----Original Message----- >>From: netfilter-bounces@lists.netfilter.org [mailto:netfilter- >>bounces@lists.netfilter.org] On Behalf Of ro0ot >>Sent: Saturday, December 10, 2005 11:59 PM >>To: netfilter@lists.netfilter.org; bridge@lists.osdl.org >>Subject: Bridging Firewall with Kernel 2.6 failed >> >>Hi all, >> >>I have a bridging firewall running fine with kernel 2.4.31 (Slackware >>10.1) and iptables 1.2.11 >> >>Yesterday I install the new kernel 2.6.14.3 and iptables 1.3.4 but the >>bridging firewall doesn't work anymore. >> >>Do I need to patch the kernel 2.6 as what I did it for kernel 2.4? Or >>what I have missed? >> >>Regards, >>ro0ot >> >> >> >> >> > > > > > >