From: steve@hassard.net (Stephen Hassard)
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] report: ATI IXP use via i2c-piix4
Date: Mon, 19 Dec 2005 18:50:29 +0000 [thread overview]
Message-ID: <43A700F5.4020606@hassard.net> (raw)
I've got an MSI RS482M4-ILD motherboard that I've managed to get going
with lm-sensors.
Hardware info page:
http://www.msicomputer.com/product/p_spec.asp?model=RS482M4-ILD&class=mb
I'm using kernel 2.6.15-rc6-ck1 w/ the patch from
http://assembler.cz/download/ati2_patch
---
Dec 19 10:38:38 localhost sensord: sensord started
Dec 19 10:38:38 localhost sensord: Sensor alarm: Chip
w83627thf-isa-0600: VCore: +1.15 V (min = +1.94 V, max = +1.94 V) [ALARM]
Dec 19 10:38:38 localhost sensord: Sensor alarm: Chip
w83627thf-isa-0600: -12V: -12.28 V (min = -10.80 V, max = -13.18 V) [ALARM]
Dec 19 10:38:38 localhost sensord: Sensor alarm: Chip
w83627thf-isa-0600: CPU Fan: 0 RPM (min = 1318 RPM, div = 8) [ALARM]
Dec 19 10:38:38 localhost sensord: Sensor alarm: Chip
w83627thf-isa-0600: fan3: 0 RPM (min = 2343 RPM, div = 8) [ALARM]
Dec 19 10:38:38 localhost sensord: Sensor alarm: Chip
w83627thf-isa-0600: alarms: Chassis intrusion detection [ALARM]
Dec 19 10:38:38 localhost sensord: Chip: w83627thf-isa-0600
Dec 19 10:38:38 localhost sensord: Adapter: ISA adapter
Dec 19 10:38:38 localhost sensord: Algorithm: ISA algorithm
Dec 19 10:38:38 localhost sensord: VCore: +1.15 V (min = +1.94 V, max
= +1.94 V) [ALARM]
Dec 19 10:38:38 localhost sensord: +12V: +12.89 V (min = +10.82 V, max
= +13.19 V)
Dec 19 10:38:38 localhost sensord: +3.3V: +3.20 V (min = +3.14 V, max
= +3.47 V)
Dec 19 10:38:38 localhost sensord: +5V: +5.04 V (min = +4.75 V, max =
+5.25 V)
Dec 19 10:38:38 localhost sensord: -12V: -12.28 V (min = -10.80 V, max
= -13.18 V) [ALARM]
Dec 19 10:38:38 localhost sensord: V5SB: +5.08 V (min = +4.76 V, max =
+5.24 V)
Dec 19 10:38:38 localhost sensord: VBat: +3.36 V (min = +2.40 V, max =
+3.60 V)
Dec 19 10:38:38 localhost sensord: fan1: 3245 RPM (min = 703 RPM, div
= 8) (beep)
Dec 19 10:38:38 localhost sensord: CPU Fan: 0 RPM (min = 1318 RPM, div
= 8) [ALARM]
Dec 19 10:38:38 localhost sensord: fan3: 0 RPM (min = 2343 RPM, div =
8) [ALARM]
Dec 19 10:38:38 localhost sensord: M/B Temp: 30 C (limit = 70 C,
sensors = thermistor)
Dec 19 10:38:38 localhost sensord: CPU Temp: 25.0 C (limit = 80 C,
hysteresis = 75 C, sensor = thermistor)
Dec 19 10:38:38 localhost sensord: temp3: -5.5 C (limit = 80 C,
hysteresis = 75 C, sensor = PII/Celeron diode)
Dec 19 10:38:38 localhost sensord: vid: +0.275 V
Dec 19 10:38:38 localhost sensord: alarms: Chassis intrusion detection
[ALARM]
Dec 19 10:38:38 localhost sensord: beep_enable: Sound alarm enabled
Dec 19 10:38:38 localhost sensord: Chip: eeprom-i2c-0-51
Dec 19 10:38:38 localhost sensord: Adapter: SMBus PIIX4 adapter at 0b00
Dec 19 10:38:38 localhost sensord: Algorithm: Unavailable from sysfs
Dec 19 10:38:38 localhost sensord: Memory type: DDR SDRAM DIMM SPD
Dec 19 10:38:38 localhost sensord: Memory size (MB): Invalid 13 10 2 4
Dec 19 10:38:38 localhost sensord: Chip: eeprom-i2c-0-50
Dec 19 10:38:38 localhost sensord: Adapter: SMBus PIIX4 adapter at 0b00
Dec 19 10:38:38 localhost sensord: Algorithm: Unavailable from sysfs
Dec 19 10:38:38 localhost sensord: Memory type: DDR SDRAM DIMM SPD
Dec 19 10:38:38 localhost sensord: Memory size (MB): Invalid 13 10 2 4
next reply other threads:[~2005-12-19 18:50 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-19 18:50 Stephen Hassard [this message]
2005-12-19 19:15 ` [lm-sensors] report: ATI IXP use via i2c-piix4 Rudolf Marek
2005-12-19 19:19 ` Stephen Hassard
2005-12-19 19:22 ` Stephen Hassard
2005-12-19 19:26 ` Rudolf Marek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43A700F5.4020606@hassard.net \
--to=steve@hassard.net \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.