From mboxrd@z Thu Jan 1 00:00:00 1970 From: Leonardo Borda Date: Tue, 20 Dec 2005 19:28:58 +0000 Subject: [LARTC] Advanced Routing and Secondary ip address in eth0 Message-Id: <43A85B7A.90808@netwall.com.br> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hello, I have configured advanced routing with success using three (03) network adapters ( ETH0, ETH1 and ETH2). Now I have to configure an addittion range in the same Interface ETH0 ( another internet ip range address ), so I would like to have TWO different ranges at the same ETHERNET CARD ( in this case ETH0 ) AND having advanced routing running it. I Did the same configurations as I already done it before and it is not working. When testing through the secondary ip address the packets get out from the wrong default gateway, however testing from primary range I am able to route. Is it possible to do advanced routing having in the same Interface TWO different ip range address? Somebody had done this somewhere? Thanks in advanced -- Atenciosamente, Leonardo Borda Netwall Tecnologia Fone/Fax: +55 51 3388.3201 Celular: +55 51 8131.9740 mailto:borda@netwall.com.br - http://www.netwall.com.br _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc