From: Hannes Reinecke <hare@suse.de>
To: James Bottomley <James.Bottomley@steeleye.com>
Cc: SCSI Mailing List <linux-scsi@vger.kernel.org>
Subject: [PATCH 6/6] aic7xxx: Update aicasm
Date: Thu, 22 Dec 2005 15:25:51 +0100 [thread overview]
Message-ID: <43AAB76F.3000606@suse.de> (raw)
[-- Attachment #1: Type: text/plain, Size: 204 bytes --]
Update aicasm code with fixes from adaptec.
--
Dr. Hannes Reinecke hare@suse.de
SuSE Linux Products GmbH S390 & zSeries
Maxfeldstraße 5 +49 911 74053 688
90409 Nürnberg http://www.suse.de
[-- Attachment #2: 0006-aic7xxx-Update-aicasm.txt --]
[-- Type: text/plain, Size: 8730 bytes --]
[PATCH 6/6] aic7xxx: Update aicasm
Update aicasm code with fixes from adaptec.
---
drivers/scsi/aic7xxx/aicasm/aicasm.c | 23 ++++--
drivers/scsi/aic7xxx/aicasm/aicasm_gram.y | 19 +++++
drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h | 88 ++++++++++++++++++++++++
drivers/scsi/aic7xxx/aicasm/aicasm_scan.l | 27 +++++--
4 files changed, 140 insertions(+), 17 deletions(-)
3325dc623b04e10cc3d5219fa1ecb0ce6d779883
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm.c b/drivers/scsi/aic7xxx/aicasm/aicasm.c
--- a/drivers/scsi/aic7xxx/aicasm/aicasm.c
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm.c
@@ -37,7 +37,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm.c#22 $
+ * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm.c#23 $
*
* $FreeBSD$
*/
@@ -609,10 +609,10 @@ output_listing(char *ifilename)
while (line < cur_instr->srcline) {
fgets(buf, sizeof(buf), ifile);
- fprintf(listfile, "\t\t%s", buf);
+ fprintf(listfile, " \t%s", buf);
line++;
}
- fprintf(listfile, "%03x %02x%02x%02x%02x", instrptr,
+ fprintf(listfile, "%04x %02x%02x%02x%02x", instrptr,
#ifdef __LITTLE_ENDIAN
cur_instr->format.bytes[0],
cur_instr->format.bytes[1],
@@ -624,14 +624,23 @@ output_listing(char *ifilename)
cur_instr->format.bytes[1],
cur_instr->format.bytes[0]);
#endif
- fgets(buf, sizeof(buf), ifile);
- fprintf(listfile, "\t%s", buf);
- line++;
+ /*
+ * Macro expansions can cause several instructions
+ * to be output for a single source line. Only
+ * advance the line once in these cases.
+ */
+ if (line == cur_instr->srcline) {
+ fgets(buf, sizeof(buf), ifile);
+ fprintf(listfile, "\t%s", buf);
+ line++;
+ } else {
+ fprintf(listfile, "\n");
+ }
instrptr++;
}
/* Dump the remainder of the file */
while(fgets(buf, sizeof(buf), ifile) != NULL)
- fprintf(listfile, "\t\t%s", buf);
+ fprintf(listfile, " %s", buf);
fclose(ifile);
}
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
@@ -38,7 +38,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm_gram.y#29 $
+ * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm_gram.y#30 $
*
* $FreeBSD$
*/
@@ -157,6 +157,8 @@ static int is_download_const(expression
%token T_END_CS
+%token T_PAD_PAGE
+
%token T_FIELD
%token T_ENUM
@@ -189,6 +191,10 @@ static int is_download_const(expression
%token <value> T_OR
+/* 16 bit extensions */
+%token <value> T_OR16 T_AND16 T_XOR16 T_ADD16
+%token <value> T_ADC16 T_MVI16 T_TEST16 T_CMP16 T_CMPXCHG
+
%token T_RET
%token T_NOP
@@ -207,7 +213,7 @@ static int is_download_const(expression
%type <expression> expression immediate immediate_or_a
-%type <value> export ret f1_opcode f2_opcode jmp_jc_jnc_call jz_jnz je_jne
+%type <value> export ret f1_opcode f2_opcode f4_opcode jmp_jc_jnc_call jz_jnz je_jne
%type <value> mode_value mode_list macro_arglist
@@ -1304,6 +1310,15 @@ f2_opcode:
| T_ROR { $$ = AIC_OP_ROR; }
;
+f4_opcode:
+ T_OR16 { $$ = AIC_OP_OR16; }
+| T_AND16 { $$ = AIC_OP_AND16; }
+| T_XOR16 { $$ = AIC_OP_XOR16; }
+| T_ADD16 { $$ = AIC_OP_ADD16; }
+| T_ADC16 { $$ = AIC_OP_ADC16; }
+| T_MVI16 { $$ = AIC_OP_MVI16; }
+;
+
code:
f2_opcode destination ',' expression opt_source ret ';'
{
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h b/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h
@@ -37,13 +37,14 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm_insformat.h#11 $
+ * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm_insformat.h#12 $
*
* $FreeBSD$
*/
#include <asm/byteorder.h>
+/* 8bit ALU logic operations */
struct ins_format1 {
#ifdef __LITTLE_ENDIAN
uint32_t immediate : 8,
@@ -62,6 +63,7 @@ struct ins_format1 {
#endif
};
+/* 8bit ALU shift/rotate operations */
struct ins_format2 {
#ifdef __LITTLE_ENDIAN
uint32_t shift_control : 8,
@@ -80,6 +82,7 @@ struct ins_format2 {
#endif
};
+/* 8bit branch control operations */
struct ins_format3 {
#ifdef __LITTLE_ENDIAN
uint32_t immediate : 8,
@@ -96,10 +99,68 @@ struct ins_format3 {
#endif
};
+/* 16bit ALU logic operations */
+struct ins_format4 {
+#ifdef __LITTLE_ENDIAN
+ uint32_t opcode_ext : 8,
+ source : 9,
+ destination : 9,
+ ret : 1,
+ opcode : 4,
+ parity : 1;
+#else
+ uint32_t parity : 1,
+ opcode : 4,
+ ret : 1,
+ destination : 9,
+ source : 9,
+ opcode_ext : 8;
+#endif
+};
+
+/* 16bit branch control operations */
+struct ins_format5 {
+#ifdef __LITTLE_ENDIAN
+ uint32_t opcode_ext : 8,
+ source : 9,
+ address : 10,
+ opcode : 4,
+ parity : 1;
+#else
+ uint32_t parity : 1,
+ opcode : 4,
+ address : 10,
+ source : 9,
+ opcode_ext : 8;
+#endif
+};
+
+/* Far branch operations */
+struct ins_format6 {
+#ifdef __LITTLE_ENDIAN
+ uint32_t page : 3,
+ opcode_ext : 5,
+ source : 9,
+ address : 10,
+ opcode : 4,
+ parity : 1;
+#else
+ uint32_t parity : 1,
+ opcode : 4,
+ address : 10,
+ source : 9,
+ opcode_ext : 5,
+ page : 3;
+#endif
+};
+
union ins_formats {
struct ins_format1 format1;
struct ins_format2 format2;
struct ins_format3 format3;
+ struct ins_format4 format4;
+ struct ins_format5 format5;
+ struct ins_format6 format6;
uint8_t bytes[4];
uint32_t integer;
};
@@ -118,6 +179,8 @@ struct instruction {
#define AIC_OP_ROL 0x5
#define AIC_OP_BMOV 0x6
+#define AIC_OP_MVI16 0x7
+
#define AIC_OP_JMP 0x8
#define AIC_OP_JC 0x9
#define AIC_OP_JNC 0xa
@@ -131,3 +194,26 @@ struct instruction {
#define AIC_OP_SHL 0x10
#define AIC_OP_SHR 0x20
#define AIC_OP_ROR 0x30
+
+/* 16bit Ops. Low byte main opcode. High byte extended opcode. */
+#define AIC_OP_OR16 0x8005
+#define AIC_OP_AND16 0x8105
+#define AIC_OP_XOR16 0x8205
+#define AIC_OP_ADD16 0x8305
+#define AIC_OP_ADC16 0x8405
+#define AIC_OP_JNE16 0x8805
+#define AIC_OP_JNZ16 0x8905
+#define AIC_OP_JE16 0x8C05
+#define AIC_OP_JZ16 0x8B05
+#define AIC_OP_JMP16 0x9005
+#define AIC_OP_JC16 0x9105
+#define AIC_OP_JNC16 0x9205
+#define AIC_OP_CALL16 0x9305
+#define AIC_OP_CALL16 0x9305
+
+/* Page extension is low three bits of second opcode byte. */
+#define AIC_OP_JMPF 0xA005
+#define AIC_OP_CALLF 0xB005
+#define AIC_OP_JCF 0xC005
+#define AIC_OP_JNCF 0xD005
+#define AIC_OP_CMPXCHG 0xE005
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_scan.l b/drivers/scsi/aic7xxx/aicasm/aicasm_scan.l
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_scan.l
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_scan.l
@@ -38,7 +38,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm_scan.l#19 $
+ * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm_scan.l#20 $
*
* $FreeBSD$
*/
@@ -132,7 +132,7 @@ if[ \t]*\( {
*string_buf_ptr++ = *yptr++;
}
}
-
+else { return T_ELSE; }
VERSION { return T_VERSION; }
PREFIX { return T_PREFIX; }
PATCH_ARG_LIST { return T_PATCH_ARG_LIST; }
@@ -173,10 +173,6 @@ RW|RO|WO {
yylval.value = WO;
return T_MODE;
}
-BEGIN_CRITICAL { return T_BEGIN_CS; }
-END_CRITICAL { return T_END_CS; }
-SET_SRC_MODE { return T_SET_SRC_MODE; }
-SET_DST_MODE { return T_SET_DST_MODE; }
field { return T_FIELD; }
enum { return T_ENUM; }
mask { return T_MASK; }
@@ -192,6 +188,13 @@ none { return T_NONE; }
sindex { return T_SINDEX; }
A { return T_A; }
+ /* Instruction Formatting */
+PAD_PAGE { return T_PAD_PAGE; }
+BEGIN_CRITICAL { return T_BEGIN_CS; }
+END_CRITICAL { return T_END_CS; }
+SET_SRC_MODE { return T_SET_SRC_MODE; }
+SET_DST_MODE { return T_SET_DST_MODE; }
+
/* Opcodes */
shl { return T_SHL; }
shr { return T_SHR; }
@@ -223,7 +226,17 @@ and { return T_AND; }
or { return T_OR; }
ret { return T_RET; }
nop { return T_NOP; }
-else { return T_ELSE; }
+
+ /* ARP2 16bit extensions */
+or16 { return T_OR16; }
+and16 { return T_AND16; }
+xor16 { return T_XOR16; }
+add16 { return T_ADD16; }
+adc16 { return T_ADC16; }
+mvi16 { return T_MVI16; }
+test16 { return T_TEST16; }
+cmp16 { return T_CMP16; }
+cmpxchg { return T_CMPXCHG; }
/* Allowed Symbols */
\<\< { return T_EXPR_LSHIFT; }
reply other threads:[~2005-12-22 14:25 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43AAB76F.3000606@suse.de \
--to=hare@suse.de \
--cc=James.Bottomley@steeleye.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.