All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andreas Steinmetz <ast@domdv.de>
To: Linux Kernel Mailinglist <linux-kernel@vger.kernel.org>,
	Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Subject: 2.6.15rc6: ide oops+panic
Date: Thu, 22 Dec 2005 22:55:38 +0100	[thread overview]
Message-ID: <43AB20DA.2020506@domdv.de> (raw)

[-- Attachment #1: Type: text/plain, Size: 171 bytes --]

Attached are boot messages and panic captured via serial console, as
well as the system config.
-- 
Andreas Steinmetz                       SPAMmers use robotrap@domdv.de

[-- Attachment #2: top.log --]
[-- Type: text/plain, Size: 22731 bytes --]

Bootdata ok (command line is BOOT_IMAGE=2.6.15rc6s root=301 video=radeonfb:off console=ttyS0,115200 console=tty0)
Linux version 2.6.15-rc6top (root@gringo) (gcc version 3.4.4) #1 SMP PREEMPT Thu Dec 22 14:23:34 CET 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
 BIOS-e820: 00000000bfff0000 - 00000000bffff000 (ACPI data)
 BIOS-e820: 00000000bffff000 - 00000000c0000000 (ACPI NVS)
 BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 1 -> APIC 1 -> Node 1
ACPI: [SRAT:0x00] ignored 2 entries of 4 found
SRAT: Node 0 PXM 0 100000-80000000
SRAT: Node 1 PXM 1 80000000-c0000000
SRAT: Node 1 PXM 1 80000000-140000000
SRAT: Node 0 PXM 0 0-80000000
Bootmem setup node 0 0000000000000000-0000000080000000
Bootmem setup node 1 0000000080000000-0000000140000000
ACPI: PM-Timer IO Port: 0x5008
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfe9ff000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 17, address 0xfe9ff000, GSI 24-27
ACPI: IOAPIC (id[0x04] address[0xfe9fe000] gsi_base[28])
IOAPIC[2]: apic_id 4, version 17, address 0xfe9fe000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Setting APIC routing to flat
ACPI: HPET id: 0x102282a0 base: 0xfec01000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c4000000 (gap: c0000000:3f780000)
Checking aperture...
CPU 0: aperture @ f0000000 size 128 MB
CPU 1: aperture @ f0000000 size 128 MB
Built 2 zonelists
Kernel command line: BOOT_IMAGE=2.6.15rc6s root=301 video=radeonfb:off console=ttyS0,115200 console=tty0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 14.318180 MHz HPET timer.
time.c: Detected 1992.254 MHz processor.
Console: colour VGA+ 80x50
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Memory: 4102684k/5242880k available (4188k kernel code, 91168k reserved, 1774k data, 280k init)
Calibrating delay using timer specific routine.. 3988.45 BogoMIPS (lpj=1994226)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(1) -> Node 0 -> Core 0
mtrr: v2.0 (20020519)
Using local APIC timer interrupts.
Detected 12.451 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3983.84 BogoMIPS (lpj=1991921)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1(1) -> Node 1 -> Core 0
AMD Opteron(tm) Processor 246 stepping 08
CPU 1: Syncing TSC to CPU 0.
CPU 1: synchronized TSC with CPU 0 (last diff -4 cycles, maxerr 1073 cycles)
Brought up 2 CPUs
time.c: Using HPET based timekeeping.
testing NMI watchdog ... OK.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Root Bridge [PCIB] (0000:04)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
hpet0: at MMIO 0xfec01000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
hpet0: 3 32-bit timers, 14318180 Hz
agpgart: Detected AMD 8151 AGP Bridge rev B2
agpgart: AGP aperture is 128M @ 0xf0000000
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
pnp: 00:09: ioport range 0x680-0x6ff has been reserved
pnp: 00:09: ioport range 0x295-0x296 has been reserved
PCI: Bridge: 0000:00:06.0
  IO window: 6000-7fff
  MEM window: fe200000-fe3fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0a.0
  IO window: 8000-9fff
  MEM window: fe400000-fe4fffff
  PREFETCH window: cde00000-cdefffff
PCI: Bridge: 0000:00:0b.0
  IO window: a000-afff
  MEM window: fe500000-fe8fffff
  PREFETCH window: cdf00000-cdffffff
PCI: Bridge: 0000:04:01.0
  IO window: c000-cfff
  MEM window: fea00000-feafffff
  PREFETCH window: ce100000-ee0fffff
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1135374123.884:1): initialized
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
PCI: MSI quirk detected. pci_msi_quirk set.
PCI: MSI quirk detected. pci_msi_quirk set.
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Processor [CPU1] (supports 8 throttling states)
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
hw_random: AMD768 system management I/O registers at 0x5000.
hw_random hardware driver 1.0.0 loaded
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.0 20040925
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized radeon 1.19.0 20050911 on minor 0: 
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
Intel(R) PRO/1000 Network Driver - version 6.1.16-k2-NAPI
Copyright (c) 1999-2005 Intel Corporation.
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 28 (level, low) -> IRQ 17
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:03:03.1[B] -> GSI 29 (level, low) -> IRQ 18
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
tg3.c:v3.45 (Dec 13, 2005)
GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 24 (level, low) -> IRQ 19
eth2: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCI:33MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:28:25:e3
eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
eth2: dma_rwctrl[763f0000]
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD8111: IDE controller at PCI slot 0000:00:07.1
AMD8111: chipset revision 3
AMD8111: not 100% native mode: will probe irqs later
AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD2500JB-32FUA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: WDC WD2500JB-32FUA0, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
PDC20268: IDE controller at PCI slot 0000:02:08.0
GSI 20 sharing vector 0xC9 and IRQ 20
ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 27 (level, low) -> IRQ 20
PDC20268: chipset revision 2
PDC20268: ROM enabled at 0xfe4e0000
PDC20268: 100% native mode on irq 20
    ide2: BM-DMA at 0x8800-0x8807, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0x8808-0x880f, BIOS settings: hdg:pio, hdh:pio
hde: WDC WD2500JB-32FUA0, ATA DISK drive
ide2 at 0x9800-0x9807,0x9402 on irq 20
hdg: PLEXTOR DVDR PX-708A, ATAPI CD/DVD-ROM drive
ide3 at 0x9000-0x9007,0x8c02 on irq 20
hda: max request size: 1024KiB
hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
hdc: max request size: 1024KiB
hdc: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
hdc: cache flushes supported
 hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 >
hde: max request size: 1024KiB
hde: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
hde: cache flushes supported
 hde: hde1 hde2 hde3 hde4 < hde5 hde6 hde7 >
hdg: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
st: Version 20050830, fixed bufsize 32768, s/g segs 256
ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
GSI 21 sharing vector 0xD1 and IRQ 21
ACPI: PCI Interrupt 0000:01:0c.0[A] -> GSI 19 (level, low) -> IRQ 21
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[fe3fd000-fe3fd7ff]  Max Packet=[2048]
video1394: Installed video1394 module
ieee1394: raw1394: /dev/raw1394 device initialized
sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
usbmon: debugfs is not available
GSI 22 sharing vector 0xD9 and IRQ 22
ACPI: PCI Interrupt 0000:01:0a.2[C] -> GSI 18 (level, low) -> IRQ 22
ehci_hcd 0000:01:0a.2: EHCI Host Controller
ehci_hcd 0000:01:0a.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:01:0a.2: irq 22, io mem 0xfe3fdc00
ehci_hcd 0000:01:0a.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ACPI: PCI Interrupt 0000:01:00.0[D] -> GSI 19 (level, low) -> IRQ 21
ohci_hcd 0000:01:00.0: OHCI Host Controller
ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:01:00.0: irq 21, io mem 0xfe3fe000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:01:00.1[D] -> GSI 19 (level, low) -> IRQ 21
ohci_hcd 0000:01:00.1: OHCI Host Controller
ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:01:00.1: irq 21, io mem 0xfe3ff000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:01:0a.0: OHCI Host Controller
ohci_hcd 0000:01:0a.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:01:0a.0: irq 16, io mem 0xfe3fb000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
hub 4-0:1.0: over-current change on port 1
GSI 23 sharing vector 0xE1 and IRQ 23
ACPI: PCI Interrupt 0000:01:0a.1[B] -> GSI 17 (level, low) -> IRQ 23
ohci_hcd 0000:01:0a.1: OHCI Host Controller
ohci_hcd 0000:01:0a.1: new USB bus registered, assigned bus number 5
ohci_hcd 0000:01:0a.1: irq 23, io mem 0xfe3fc000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 4-1: new full speed USB device using ohci_hcd and address 2
hub 4-0:1.0: over-current change on port 2
USB Universal Host Controller Interface driver v2.3
Initializing USB Mass Storage driver...
hub 4-0:1.0: over-current change on port 3
scsi0 : SCSI emulation for USB Mass Storage devices
hub 5-0:1.0: over-current change on port 1
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: generic_sse
   generic_sse:  6072.000 MB/sec
raid5: using function: generic_sse (6072.000 MB/sec)
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07 13:30:21 2005 UTC).
ACPI: PCI Interrupt 0000:00:07.5[B] -> GSI 17 (level, low) -> IRQ 23
input: AT Translated Set 2 keyboard as /class/input/input0
intel8x0_measure_ac97_clock: measured 51379 usecs
intel8x0: clocking to 48000
ALSA device list:
  #0: AMD AMD8111 with AD1981B at 0xb800, irq 23
u32 classifier
    OLD policer on 
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 288 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
hub 5-0:1.0: over-current change on port 2
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
md: Autodetecting RAID arrays.
md: autorun ...
md: considering hde6 ...
md:  adding hde6 ...
md: hde3 has different UUID to hde6
md:  adding hdc6 ...
md: hdc3 has different UUID to hde6
md:  adding hda6 ...
md: hda3 has different UUID to hde6
md: created md1
md: bind<hda6>
md: bind<hdc6>
md: bind<hde6>
md: running: <hde6><hdc6><hda6>
raid5: device hde6 operational as raid disk 2
raid5: device hdc6 operational as raid disk 1
raid5: device hda6 operational as raid disk 0
raid5: allocated 3212kB for md1
raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 0
RAID5 conf printout:
 --- rd:3 wd:3 fd:0
 disk 0, o:1, dev:hda6
 disk 1, o:1, dev:hdc6
 disk 2, o:1, dev:hde6
md: considering hde3 ...
md:  adding hde3 ...
md:  adding hdc3 ...
md:  adding hda3 ...
md: created md0
md: bind<hda3>
md: bind<hdc3>
md: bind<hde3>
md: running: <hde3><hdc3><hda3>
raid5: device hde3 operational as raid disk 2
raid5: device hdc3 operational as raid disk 1
raid5: device hda3 operational as raid disk 0
raid5: allocated 3212kB for md0
raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 0
RAID5 conf printout:
 --- rd:3 wd:3 fd:0
 disk 0, o:1, dev:hda3
 disk 1, o:1, dev:hdc3
 disk 2, o:1, dev:hde3
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 280k freed
----------- [cut here ] --------- [please bite here ] ---------
Kernel BUG at drivers/ide/ide-io.c:63
invalid operand: 0000 [1] PREEMPT SMP 
CPU 0 
Modules linked in: snd_usb_audio snd_usb_lib snd_rawmidi snd_hwdep
Pid: 0, comm: swapper Not tainted 2.6.15-rc6top #1
RIP: 0010:[<ffffffff8038e995>] <ffffffff8038e995>{__ide_end_request+53}
RSP: 0018:ffffffff806d67d0  EFLAGS: 00010046
RAX: 0000000001000479 RBX: ffff810002f7b490 RCX: 0000000000000008
RDX: 0000000000000000 RSI: ffff810002f7b490 RDI: ffffffff80730d98
RBP: 0000000000000000 R08: 000000003b9aca00 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000064 R12: ffffffff80730d98
R13: 0000000000000008 R14: 0000000000000001 R15: ffffffff80730c80
FS:  00002aaaab1aaae0(0000) GS:ffffffff80751800(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00002aaaaafbb7b0 CR3: 000000007e0e0000 CR4: 00000000000006e0
Process swapper (pid: 0, threadinfo ffffffff8075a000, task ffffffff805d36c0)
Stack: ffff810002f7b490 ffff81013feeacd0 ffff810002f5a550 0000000000000050 
       0000000000000050 ffffffff80299aae 0000000000000246 ffff81013feeacd0 
       ffffffff80730d98 ffffffff8038f0f2 
Call Trace: <IRQ> <ffffffff80299aae>{blk_pre_flush_end_io+110}
       <ffffffff8038f0f2>{ide_end_drive_cmd+946} <ffffffff8038f6f0>{drive_cmd_intr+288}
       <ffffffff8038f5d0>{drive_cmd_intr+0} <ffffffff80390850>{ide_intr+400}
       <ffffffff8015c7bc>{handle_IRQ_event+44} <ffffffff8015c8a1>{__do_IRQ+177}
       <ffffffff80110c9f>{do_IRQ+47} <ffffffff8010e2d8>{ret_from_intr+0}
       <ffffffff80390ad0>{ide_outb+0} <ffffffff80390ad6>{ide_outb+6}
       <ffffffff803995b1>{ide_do_rw_disk+529} <ffffffff8049a036>{ip_rcv+1302}
       <ffffffff80120000>{__ioremap+512} <ffffffff80390160>{ide_do_request+1648}
       <ffffffff8038f0f2>{ide_end_drive_cmd+946} <ffffffff80390895>{ide_intr+469}
       <ffffffff8015c7bc>{handle_IRQ_event+44} <ffffffff8015c8a1>{__do_IRQ+177}
       <ffffffff80110c9f>{do_IRQ+47} <ffffffff8010e2d8>{ret_from_intr+0}
        <EOI> <ffffffff8010ebf1>{kernel_thread+129} <ffffffff80390ad0>{ide_outb+0}
       <ffffffff8010bd96>{default_idle+54} <ffffffff8010c012>{cpu_idle+98}
       <ffffffff8075c835>{start_kernel+485} <ffffffff8075c294>{_sinittext+660}
       

Code: 0f 0b 68 61 85 57 80 c2 3f 00 90 a8 02 74 0c 85 ed 7f 08 44 
RIP <ffffffff8038e995>{__ide_end_request+53} RSP <ffffffff806d67d0>
 <0>Kernel panic - not syncing: Aiee, killing interrupt handler!
 NMI Watchdog detected LOCKUP on CPU 0
CPU 0 
Modules linked in: snd_usb_audio snd_usb_lib snd_rawmidi snd_hwdep
Pid: 0, comm: swapper Not tainted 2.6.15-rc6top #1
RIP: 0010:[<ffffffff801198f4>] <ffffffff801198f4>{__smp_call_function+116}
RSP: 0018:ffffffff806d6488  EFLAGS: 00000097
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000002
RDX: 0000ffff0000ffff RSI: 0000000000000000 RDI: ffffffff807560d8
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff80119a40
R13: 0000000000000000 R14: ffffffff805526dd R15: ffffffff80730c80
FS:  00002aaaab1aaae0(0000) GS:ffffffff80751800(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00002aaaaafbb7b0 CR3: 000000007e0e0000 CR4: 00000000000006e0
Process swapper (pid: 0, threadinfo ffffffff8075a000, task ffffffff805d36c0)
Stack: ffffffff80119a40 0000000000000000 ffffffff00000000 ffffffff00000000 
       0000000000000400 0000000000000000 0000000000000000 ffffffff805d36c0 
       000000000000000b ffffffff80119aa0 
Call Trace: <IRQ> <ffffffff80119a40>{smp_really_stop_cpu+0} <ffffffff80119aa0>{smp_send_stop+64}
       <ffffffff80135ca1>{panic+225} <ffffffff8010f543>{show_stack+211}
       <ffffffff8010f639>{show_registers+233} <ffffffff8013869f>{do_exit+143}
       <ffffffff80315327>{do_unblank_screen+119} <ffffffff8010f8f1>{die+81}
       <ffffffff8010fd41>{do_invalid_op+145} <ffffffff8038e995>{__ide_end_request+53}
       <ffffffff80136a1d>{printk+141} <ffffffff804d2b54>{ip_refrag+36}
       <ffffffff8010eaa1>{error_exit+0} <ffffffff8038e995>{__ide_end_request+53}
       <ffffffff80299aae>{blk_pre_flush_end_io+110} <ffffffff8038f0f2>{ide_end_drive_cmd+946}
       <ffffffff8038f6f0>{drive_cmd_intr+288} <ffffffff8038f5d0>{drive_cmd_intr+0}
       <ffffffff80390850>{ide_intr+400} <ffffffff8015c7bc>{handle_IRQ_event+44}
       <ffffffff8015c8a1>{__do_IRQ+177} <ffffffff80110c9f>{do_IRQ+47}
       <ffffffff8010e2d8>{ret_from_intr+0} <ffffffff80390ad0>{ide_outb+0}
       <ffffffff80390ad6>{ide_outb+6} <ffffffff803995b1>{ide_do_rw_disk+529}
       <ffffffff8049a036>{ip_rcv+1302} <ffffffff80120000>{__ioremap+512}
       <ffffffff80390160>{ide_do_request+1648} <ffffffff8038f0f2>{ide_end_drive_cmd+946}
       <ffffffff80390895>{ide_intr+469} <ffffffff8015c7bc>{handle_IRQ_event+44}
       <ffffffff8015c8a1>{__do_IRQ+177} <ffffffff80110c9f>{do_IRQ+47}
       <ffffffff8010e2d8>{ret_from_intr+0}  <EOI> <ffffffff8010ebf1>{kernel_thread+129}
       <ffffffff80390ad0>{ide_outb+0} <ffffffff8010bd96>{default_idle+54}
       <ffffffff8010c012>{cpu_idle+98} <ffffffff8075c835>{start_kernel+485}
       <ffffffff8075c294>{_sinittext+660} 

Code: 39 d8 74 08 f3 90 eb f4 66 66 66 90 85 ed 74 0e 8b 44 24 14 
console shuts up ...
 <0>Kernel panic - not syncing: Aiee, killing interrupt handler!
 NMI Watchdog detected LOCKUP on CPU 1
CPU 1 
Modules linked in: snd_usb_audio snd_usb_lib snd_rawmidi snd_hwdep
Pid: 0, comm: swapper Not tainted 2.6.15-rc6top #1
RIP: 0010:[<ffffffff80513975>] <ffffffff80513975>{_spin_lock_irqsave+117}
RSP: 0018:ffff81013fc5fed8  EFLAGS: 00000002
RAX: 0000000000000000 RBX: ffffffff80755e40 RCX: 0000000000000001
RDX: ffff810002ca3e28 RSI: 0000000000000000 RDI: ffffffff80755e40
RBP: 0000000000000000 R08: ffff810002ca2000 R09: 0000000000000000
R10: 0000000000000002 R11: 0000000000005023 R12: ffff810002ca3e28
R13: 000000000000000f R14: 0000000000000000 R15: ffff810002ca3e28
FS:  00002aaaab0146d0(0000) GS:ffffffff80751880(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00000000004810b0 CR3: 000000013e467000 CR4: 00000000000006e0
Process swapper (pid: 0, threadinfo ffff810002ca2000, task ffff810002c9c080)
Stack: 0000000000000046 ffff810002f67b40 ffff810002f6f400 ffffffff803906ef 
       ffff81013fc5fef8 ffff81013fc5fef8 ffff810002f67b40 0000000000000000 
       ffff810002ca3e28 000000000000000f 
Call Trace: <IRQ> <ffffffff803906ef>{ide_intr+47} <ffffffff8015c7bc>{handle_IRQ_event+44}
       <ffffffff8015c8a1>{__do_IRQ+177} <ffffffff80110c9f>{do_IRQ+47}
       <ffffffff8010e2d8>{ret_from_intr+0}  <EOI> <ffffffff8010bd96>{default_idle+54}
       <ffffffff8010c012>{cpu_idle+98} <ffffffff80767ff9>{start_secondary+1257}
       

Code: f3 90 8b 03 85 c0 7e f1 65 48 8b 04 25 10 00 00 00 ff 80 44 
console shuts up ...
 <0>Kernel panic - not syncing: Aiee, killing interrupt handler!
 

[-- Attachment #3: config.top.gz --]
[-- Type: application/x-gunzip, Size: 9674 bytes --]

             reply	other threads:[~2005-12-22 21:55 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-12-22 21:55 Andreas Steinmetz [this message]
2005-12-23 13:27 ` 2.6.15rc6: ide oops+panic Bartlomiej Zolnierkiewicz
2005-12-23 20:07   ` Andreas Steinmetz
2005-12-23 13:36 ` Andrew Morton
2005-12-23 20:07   ` Andreas Steinmetz
2005-12-26 23:17   ` Andreas Steinmetz
2005-12-26 23:27     ` Lee Revell
2005-12-26 23:31       ` Andreas Steinmetz
2005-12-31 23:13   ` Andreas Steinmetz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=43AB20DA.2020506@domdv.de \
    --to=ast@domdv.de \
    --cc=B.Zolnierkiewicz@elka.pw.edu.pl \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.