* Read errors from r/o-mounted reiser4
@ 2005-12-28 5:25 Joe Feise
2005-12-29 2:31 ` Vladimir V. Saveliev
0 siblings, 1 reply; 8+ messages in thread
From: Joe Feise @ 2005-12-28 5:25 UTC (permalink / raw)
To: reiserfs-list
Hi,
in one of my systems, I have /usr on a Reiser4 partition.
When I have that partition mounted read-only, I get errors whenever
I try to compile anything. Other programs that read from that partition also
seem to fail, but I don't get such nice output like the stuff from gcc.
I am currently using Slackware 10.2 with kernel 2.6.15-rc5-mm3, but I have
experienced the same problem with earlier kernels as well.
The output from a make menuconfig in the kernel source dir:
$: make menuconfig
HOSTCC scripts/kconfig/conf.o
In file included from /usr/include/bits/types.h:31,
from /usr/include/ctype.h:28,
from scripts/kconfig/conf.c:6:
/usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: syntax
error before '}' token
/usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray
'\24' in program
/usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: syntax
error at '@' token
/usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray
'\17' in program
/usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray
'\205' in program
/usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray
'\275' in program
/usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray
'\374' in program
/usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray
'\377' in program
/usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray
'\377' in program
/usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray
'\213' in program
/usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray
'\10' in program
/usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray
'\205' in program
/usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray
'\300' in program
/usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray
'\265' in program
/usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray
'\211' in program
/usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray
'\24' in program
/usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray
'\211' in program
/usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray
'\4' in program
/usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray
'\350' in program
make[1]: *** [scripts/kconfig/conf.o] Interrupt
make: *** [menuconfig] Interrupt
I interrupted it here.
Everything works fine if the partition is mounted r/w.
-Joe
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: Read errors from r/o-mounted reiser4 2005-12-28 5:25 Read errors from r/o-mounted reiser4 Joe Feise @ 2005-12-29 2:31 ` Vladimir V. Saveliev 2006-01-02 9:04 ` Joe Feise 0 siblings, 1 reply; 8+ messages in thread From: Vladimir V. Saveliev @ 2005-12-29 2:31 UTC (permalink / raw) To: jfeise; +Cc: reiserfs-list Hello On Tue, 2005-12-27 at 21:25 -0800, Joe Feise wrote: > Hi, > > in one of my systems, I have /usr on a Reiser4 partition. > When I have that partition mounted read-only, I get errors whenever > I try to compile anything. Other programs that read from that partition also > seem to fail, but I don't get such nice output like the stuff from gcc. > I am currently using Slackware 10.2 with kernel 2.6.15-rc5-mm3, but I have > experienced the same problem with earlier kernels as well. > The output from a make menuconfig in the kernel source dir: Thanks for the report. We will take a look > $: make menuconfig > > HOSTCC scripts/kconfig/conf.o > In file included from /usr/include/bits/types.h:31, > > from /usr/include/ctype.h:28, > from scripts/kconfig/conf.c:6: > /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: syntax > error before '}' token > > /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray > '\24' in program > > /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: syntax > error at '@' token > > /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray > '\17' in program > > /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray > '\205' in program > > /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray > '\275' in program > > /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray > '\374' in program > > /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray > '\377' in program > > /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray > '\377' in program > > /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray > '\213' in program > > /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray > '\10' in program > > /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray > '\205' in program > /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray > '\300' in program > > /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray > '\265' in program > > /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray > '\211' in program > > /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray > '\24' in program > > /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray > '\211' in program > > /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray > '\4' in program > > /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: stray > '\350' in program > > make[1]: *** [scripts/kconfig/conf.o] Interrupt > > make: *** [menuconfig] Interrupt > > > I interrupted it here. > Everything works fine if the partition is mounted r/w. > > -Joe > > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Read errors from r/o-mounted reiser4 2005-12-29 2:31 ` Vladimir V. Saveliev @ 2006-01-02 9:04 ` Joe Feise 2006-01-18 0:08 ` Vladimir V. Saveliev 0 siblings, 1 reply; 8+ messages in thread From: Joe Feise @ 2006-01-02 9:04 UTC (permalink / raw) To: Vladimir V. Saveliev; +Cc: reiserfs-list Vladimir V. Saveliev wrote on 12/28/05 18:31: > Hello > > On Tue, 2005-12-27 at 21:25 -0800, Joe Feise wrote: >> Hi, >> >> in one of my systems, I have /usr on a Reiser4 partition. >> When I have that partition mounted read-only, I get errors whenever >> I try to compile anything. Other programs that read from that partition also >> seem to fail, but I don't get such nice output like the stuff from gcc. >> I am currently using Slackware 10.2 with kernel 2.6.15-rc5-mm3, but I have >> experienced the same problem with earlier kernels as well. >> The output from a make menuconfig in the kernel source dir: > > Thanks for the report. We will take a look > >> $: make menuconfig >> >> HOSTCC scripts/kconfig/conf.o >> In file included from /usr/include/bits/types.h:31, >> >> from /usr/include/ctype.h:28, >> from scripts/kconfig/conf.c:6: >> /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: syntax >> error before '}' token I thought about this a bit more, and decided to take a look at the stddef.h file. As it turns out, the file has only 419 lines, so line 420 is past the end of the file. That indicates to me that there is possibly a buffer that doesn't get cleared if the fs is mounted r/o (an optimization gone wrong, maybe?) -Joe ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Read errors from r/o-mounted reiser4 2006-01-02 9:04 ` Joe Feise @ 2006-01-18 0:08 ` Vladimir V. Saveliev 2006-01-17 16:56 ` Joe Feise 2006-01-17 19:06 ` Hans Reiser 0 siblings, 2 replies; 8+ messages in thread From: Vladimir V. Saveliev @ 2006-01-18 0:08 UTC (permalink / raw) To: jfeise; +Cc: reiserfs-list [-- Attachment #1: Type: text/plain, Size: 1548 bytes --] Hello Sorry for delayed answer. we had long holidays here. Please try whether attached patch fixes the problem. On Mon, 2006-01-02 at 01:04 -0800, Joe Feise wrote: > Vladimir V. Saveliev wrote on 12/28/05 18:31: > > > Hello > > > > On Tue, 2005-12-27 at 21:25 -0800, Joe Feise wrote: > >> Hi, > >> > >> in one of my systems, I have /usr on a Reiser4 partition. > >> When I have that partition mounted read-only, I get errors whenever > >> I try to compile anything. Other programs that read from that partition also > >> seem to fail, but I don't get such nice output like the stuff from gcc. > >> I am currently using Slackware 10.2 with kernel 2.6.15-rc5-mm3, but I have > >> experienced the same problem with earlier kernels as well. > >> The output from a make menuconfig in the kernel source dir: > > > > Thanks for the report. We will take a look > > > >> $: make menuconfig > >> > >> HOSTCC scripts/kconfig/conf.o > >> In file included from /usr/include/bits/types.h:31, > >> > >> from /usr/include/ctype.h:28, > >> from scripts/kconfig/conf.c:6: > >> /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: syntax > >> error before '}' token > > > I thought about this a bit more, and decided to take a look at the stddef.h file. > As it turns out, the file has only 419 lines, so line 420 is past the end of the > file. > That indicates to me that there is possibly a buffer that doesn't get cleared if > the fs is mounted r/o (an optimization gone wrong, maybe?) > > -Joe > [-- Attachment #2: reiser4-add-missing-zero-padding.patch --] [-- Type: text/x-patch, Size: 1485 bytes --] This patch adds missing page padding with 0s. It fixes error in readpage operation for files whose data are stored in metadata blocks. fs/reiser4/plugin/item/tail.c | 10 +++++++--- 1 files changed, 7 insertions(+), 3 deletions(-) diff -puN fs/reiser4/plugin/item/tail.c~reiser4-add-missing-zero-padding fs/reiser4/plugin/item/tail.c --- linux-2.6.15-mm4/fs/reiser4/plugin/item/tail.c~reiser4-add-missing-zero-padding 2006-01-17 13:51:05.000000000 +0300 +++ linux-2.6.15-mm4-root/fs/reiser4/plugin/item/tail.c 2006-01-17 13:55:34.000000000 +0300 @@ -336,9 +336,9 @@ static int do_readpage_tail(uf_coord_t * int result; coord_t coord; lock_handle lh; - int count, mapped; struct inode *inode; + char *pagedata; /* saving passed coord in order to do not move it by tap. */ init_lh(&lh); @@ -353,8 +353,6 @@ static int do_readpage_tail(uf_coord_t * /* lookup until page is filled up. */ for (mapped = 0; mapped < PAGE_CACHE_SIZE; mapped += count) { - char *pagedata; - /* number of bytes to be copied to page. */ count = item_length_by_coord(&coord) - coord.unit_pos; @@ -413,6 +411,12 @@ static int do_readpage_tail(uf_coord_t * } } + if (mapped != PAGE_CACHE_SIZE) { + pagedata = kmap_atomic(page, KM_USER0); + memset(pagedata + mapped, 0, PAGE_CACHE_SIZE - mapped); + flush_dcache_page(new_page); + kunmap_atomic(pagedata, KM_USER0); + } /* making page up to date and releasing it. */ SetPageUptodate(page); unlock_page(page); _ ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Read errors from r/o-mounted reiser4 2006-01-18 0:08 ` Vladimir V. Saveliev @ 2006-01-17 16:56 ` Joe Feise 2006-01-19 1:00 ` Vladimir V. Saveliev 2006-01-17 19:06 ` Hans Reiser 1 sibling, 1 reply; 8+ messages in thread From: Joe Feise @ 2006-01-17 16:56 UTC (permalink / raw) To: Vladimir V. Saveliev; +Cc: reiserfs-list Hello, unfortunately, the patch did not help. I still get the same errors: $: mount -o ro,remount /usr $: make xconfig CHECK qt HOSTCC scripts/kconfig/kconfig_load.o In file included from /usr/include/sys/types.h:133, from /usr/include/stdlib.h:433, from scripts/kconfig/kconfig_load.c:3: /usr/include/time.h:418: error: stray '\22' in program /usr/include/time.h:418: error: stray '\377' in program /usr/include/time.h:418: error: stray '\34' in program /usr/include/time.h:418: error: stray '\17' in program /usr/include/time.h:418: error: stray '\21' in program /usr/include/time.h:418: error: stray '\377' in program /usr/include/time.h:418: error: stray '\36' in program /usr/include/time.h:418: error: stray '\21' in program /usr/include/time.h:418: error: stray '\22' in program /usr/include/time.h:418: error: stray '\377' in program ... /usr/include/time.h only has 417 lines. -Joe Vladimir V. Saveliev wrote on 01/17/06 16:08: > Hello > > Sorry for delayed answer. we had long holidays here. > Please try whether attached patch fixes the problem. > > On Mon, 2006-01-02 at 01:04 -0800, Joe Feise wrote: >> Vladimir V. Saveliev wrote on 12/28/05 18:31: >> >>> Hello >>> >>> On Tue, 2005-12-27 at 21:25 -0800, Joe Feise wrote: >>>> Hi, >>>> >>>> in one of my systems, I have /usr on a Reiser4 partition. >>>> When I have that partition mounted read-only, I get errors whenever >>>> I try to compile anything. Other programs that read from that partition also >>>> seem to fail, but I don't get such nice output like the stuff from gcc. >>>> I am currently using Slackware 10.2 with kernel 2.6.15-rc5-mm3, but I have >>>> experienced the same problem with earlier kernels as well. >>>> The output from a make menuconfig in the kernel source dir: >>> Thanks for the report. We will take a look >>> >>>> $: make menuconfig >>>> >>>> HOSTCC scripts/kconfig/conf.o >>>> In file included from /usr/include/bits/types.h:31, >>>> >>>> from /usr/include/ctype.h:28, >>>> from scripts/kconfig/conf.c:6: >>>> /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: syntax >>>> error before '}' token >> >> I thought about this a bit more, and decided to take a look at the stddef.h file. >> As it turns out, the file has only 419 lines, so line 420 is past the end of the >> file. >> That indicates to me that there is possibly a buffer that doesn't get cleared if >> the fs is mounted r/o (an optimization gone wrong, maybe?) >> >> -Joe ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Read errors from r/o-mounted reiser4 2006-01-17 16:56 ` Joe Feise @ 2006-01-19 1:00 ` Vladimir V. Saveliev 2006-01-18 16:33 ` Joe Feise 0 siblings, 1 reply; 8+ messages in thread From: Vladimir V. Saveliev @ 2006-01-19 1:00 UTC (permalink / raw) To: jfeise; +Cc: reiserfs-list [-- Attachment #1: Type: text/plain, Size: 2807 bytes --] Hello On Tue, 2006-01-17 at 08:56 -0800, Joe Feise wrote: > > unfortunately, the patch did not help. I still get the same errors: > sorry, please try new version of patch. (you have to patch -R the old one). > $: mount -o ro,remount /usr > $: make xconfig > CHECK qt > HOSTCC scripts/kconfig/kconfig_load.o > In file included from /usr/include/sys/types.h:133, > from /usr/include/stdlib.h:433, > from scripts/kconfig/kconfig_load.c:3: > /usr/include/time.h:418: error: stray '\22' in program > /usr/include/time.h:418: error: stray '\377' in program > /usr/include/time.h:418: error: stray '\34' in program > /usr/include/time.h:418: error: stray '\17' in program > /usr/include/time.h:418: error: stray '\21' in program > /usr/include/time.h:418: error: stray '\377' in program > /usr/include/time.h:418: error: stray '\36' in program > /usr/include/time.h:418: error: stray '\21' in program > /usr/include/time.h:418: error: stray '\22' in program > /usr/include/time.h:418: error: stray '\377' in program > ... > > /usr/include/time.h only has 417 lines. > > -Joe > > Vladimir V. Saveliev wrote on 01/17/06 16:08: > > > Hello > > > > Sorry for delayed answer. we had long holidays here. > > Please try whether attached patch fixes the problem. > > > > On Mon, 2006-01-02 at 01:04 -0800, Joe Feise wrote: > >> Vladimir V. Saveliev wrote on 12/28/05 18:31: > >> > >>> Hello > >>> > >>> On Tue, 2005-12-27 at 21:25 -0800, Joe Feise wrote: > >>>> Hi, > >>>> > >>>> in one of my systems, I have /usr on a Reiser4 partition. > >>>> When I have that partition mounted read-only, I get errors whenever > >>>> I try to compile anything. Other programs that read from that partition also > >>>> seem to fail, but I don't get such nice output like the stuff from gcc. > >>>> I am currently using Slackware 10.2 with kernel 2.6.15-rc5-mm3, but I have > >>>> experienced the same problem with earlier kernels as well. > >>>> The output from a make menuconfig in the kernel source dir: > >>> Thanks for the report. We will take a look > >>> > >>>> $: make menuconfig > >>>> > >>>> HOSTCC scripts/kconfig/conf.o > >>>> In file included from /usr/include/bits/types.h:31, > >>>> > >>>> from /usr/include/ctype.h:28, > >>>> from scripts/kconfig/conf.c:6: > >>>> /usr/lib/gcc-lib/i486-slackware-linux/3.3.6/include/stddef.h:420: error: syntax > >>>> error before '}' token > >> > >> I thought about this a bit more, and decided to take a look at the stddef.h file. > >> As it turns out, the file has only 419 lines, so line 420 is past the end of the > >> file. > >> That indicates to me that there is possibly a buffer that doesn't get cleared if > >> the fs is mounted r/o (an optimization gone wrong, maybe?) > >> > >> -Joe > > [-- Attachment #2: reiser4-add-missing-zero-padding.patch --] [-- Type: text/x-patch, Size: 4081 bytes --] This patch adds missing page padding with 0s. It fixes error in readpage operation for files whose data are stored in metadata blocks. fs/reiser4/plugin/item/tail.c | 69 ++++++++++++++++++++---------------------- 1 files changed, 34 insertions(+), 35 deletions(-) diff -puN fs/reiser4/plugin/item/tail.c~reiser4-add-missing-zero-padding fs/reiser4/plugin/item/tail.c --- linux-2.6.15-mm4/fs/reiser4/plugin/item/tail.c~reiser4-add-missing-zero-padding 2006-01-17 13:51:05.000000000 +0300 +++ linux-2.6.15-mm4-vs/fs/reiser4/plugin/item/tail.c 2006-01-18 15:01:47.000000000 +0300 @@ -330,15 +330,15 @@ static int overwrite_tail(coord_t *coord } /* tail redpage function. It is called from readpage_tail(). */ -static int do_readpage_tail(uf_coord_t * uf_coord, struct page *page) +static int do_readpage_tail(uf_coord_t *uf_coord, struct page *page) { tap_t tap; int result; coord_t coord; lock_handle lh; - int count, mapped; struct inode *inode; + char *pagedata; /* saving passed coord in order to do not move it by tap. */ init_lh(&lh); @@ -352,33 +352,32 @@ static int do_readpage_tail(uf_coord_t * goto out_tap_done; /* lookup until page is filled up. */ - for (mapped = 0; mapped < PAGE_CACHE_SIZE; mapped += count) { - char *pagedata; - - /* number of bytes to be copied to page. */ + for (mapped = 0; mapped < PAGE_CACHE_SIZE; ) { + /* number of bytes to be copied to page */ count = item_length_by_coord(&coord) - coord.unit_pos; - if (count > PAGE_CACHE_SIZE - mapped) count = PAGE_CACHE_SIZE - mapped; - /* attaching @page to address space and getting data address. */ + /* attach @page to address space and get data address */ pagedata = kmap_atomic(page, KM_USER0); - /* copying tail body to page. */ + /* copy tail item to page */ memcpy(pagedata + mapped, ((char *)item_body_by_coord(&coord) + coord.unit_pos), count); + mapped += count; flush_dcache_page(page); - /* dettaching page from address space. */ + /* dettach page from address space */ kunmap_atomic(pagedata, KM_USER0); /* Getting next tail item. */ - if (mapped + count < PAGE_CACHE_SIZE) { - - /* unlocking page in order to avoid keep it locked durring tree lookup, - which takes long term locks. */ + if (mapped < PAGE_CACHE_SIZE) { + /* + * unlock page in order to avoid keep it locked + * during tree lookup, which takes long term locks + */ unlock_page(page); /* getting right neighbour. */ @@ -386,50 +385,50 @@ static int do_readpage_tail(uf_coord_t * /* lock page back */ lock_page(page); - - /* page is uptodate due to another thread made it up to date. Getting - out of here. */ if (PageUptodate(page)) { + /* + * another thread read the page, we have + * nothing to do + */ result = 0; goto out_unlock_page; } if (result) { - /* check if there is no neighbour node. */ if (result == -E_NO_NEIGHBOR) { + /* + * rigth neighbor is not a formatted + * node + */ result = 0; - goto out_update_page; + goto done; } else { goto out_tap_relse; } } else { - /* check if found coord is not owned by file. */ if (!inode_file_plugin(inode)-> owns_item(inode, &coord)) { + /* item of another file is found */ result = 0; - goto out_update_page; + goto done; } } } } - /* making page up to date and releasing it. */ - SetPageUptodate(page); - unlock_page(page); - - /* releasing tap */ - tap_relse(&tap); - tap_done(&tap); - - return 0; - - out_update_page: + done: + if (mapped != PAGE_CACHE_SIZE) { + pagedata = kmap_atomic(page, KM_USER0); + memset(pagedata + mapped, 0, PAGE_CACHE_SIZE - mapped); + flush_dcache_page(new_page); + kunmap_atomic(pagedata, KM_USER0); + } SetPageUptodate(page); - out_unlock_page: + out_unlock_page: unlock_page(page); - out_tap_relse: + out_tap_relse: tap_relse(&tap); - out_tap_done: + out_tap_done: tap_done(&tap); return result; } _ ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Read errors from r/o-mounted reiser4 2006-01-19 1:00 ` Vladimir V. Saveliev @ 2006-01-18 16:33 ` Joe Feise 0 siblings, 0 replies; 8+ messages in thread From: Joe Feise @ 2006-01-18 16:33 UTC (permalink / raw) To: Vladimir V. Saveliev; +Cc: reiserfs-list Vladimir V. Saveliev wrote on 01/18/06 17:00: > Hello > > On Tue, 2006-01-17 at 08:56 -0800, Joe Feise wrote: >> unfortunately, the patch did not help. I still get the same errors: >> > sorry, please try new version of patch. (you have to patch -R the old > one). Vladimir, thanks. This patch works. $: mount -o ro,remount /usr $: make xconfig CHECK qt HOSTCC scripts/kconfig/kconfig_load.o /usr/lib/qt/bin/moc -i scripts/kconfig/qconf.h -o scripts/kconfig/qconf.moc HOSTCXX scripts/kconfig/qconf.o HOSTLD scripts/kconfig/qconf ... -Joe ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Read errors from r/o-mounted reiser4 2006-01-18 0:08 ` Vladimir V. Saveliev 2006-01-17 16:56 ` Joe Feise @ 2006-01-17 19:06 ` Hans Reiser 1 sibling, 0 replies; 8+ messages in thread From: Hans Reiser @ 2006-01-17 19:06 UTC (permalink / raw) To: Vladimir V. Saveliev; +Cc: jfeise, reiserfs-list Thanks for reporting this Joe, looks like a needed patch. ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2006-01-19 1:00 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2005-12-28 5:25 Read errors from r/o-mounted reiser4 Joe Feise 2005-12-29 2:31 ` Vladimir V. Saveliev 2006-01-02 9:04 ` Joe Feise 2006-01-18 0:08 ` Vladimir V. Saveliev 2006-01-17 16:56 ` Joe Feise 2006-01-19 1:00 ` Vladimir V. Saveliev 2006-01-18 16:33 ` Joe Feise 2006-01-17 19:06 ` Hans Reiser
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.