From mboxrd@z Thu Jan 1 00:00:00 1970 From: Douglas Gilbert Subject: Re: aic94xx linux driver Date: Sat, 07 Jan 2006 12:19:11 +1000 Message-ID: <43BF251F.3060007@torque.net> References: <001501c6114f$7a6c3c00$520c220a@vugd.gov.lv> Reply-To: dougg@torque.net Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: Received: from zorg.st.net.au ([203.16.233.9]:20460 "EHLO borg.st.net.au") by vger.kernel.org with ESMTP id S1752511AbWAGCSq (ORCPT ); Fri, 6 Jan 2006 21:18:46 -0500 In-Reply-To: Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: Mark Rustad Cc: Deniss , linux-scsi@vger.kernel.org Mark Rustad wrote: > Deniss, > > On Jan 4, 2006, at 10:54 AM, Deniss wrote: > >> Hello ! >> >> I have Supermicro 6014H-32 server with adaptec 9410w SAS/SATA >> controller on board. >> I have linux kernel compiled with aic94xx driver from http:// >> linux.adaptec.com/sas/ >> I am notice that SAS disks work well with this driver, but SATA disks >> are not mapped to /dev by driver. >> I tried to contact Luben Tuikov without success. >> Looks like aic94xx driver is not complete or have no SATA support > > > I have the same issue. By looking in /sys, you can see that the driver > does see SATA disks, but there is no software connection between libata > in the kernel and the SATA-tunneling protocol capability of the Adaptec > SAS driver yet. I'm sure that there will be an increasing chorus of > folks looking for this missing piece. If no-one else is looking at solving this problem (libata to aic94xx STP connection) then I may have time to look at it. I would need (remote) access to a machine with that hardware. Doug Gilbert