From: "M.Gehre" <M.Gehre@gmx.de>
To: torvalds@osdl.org
Cc: linux-kernel@vger.kernel.org
Subject: [Patch v3] Replacing 0xff.. with correct DMA_xBIT_MASK
Date: Fri, 13 Jan 2006 19:18:24 +0100 [thread overview]
Message-ID: <43C7EEF0.8070300@gmx.de> (raw)
From: Matthias Gehre <M.Gehre@gmx.de>
Included is a patch to replace all occurences of 0xff..
in calls to function pci_set_dma_mask() and pci_set_consistant_dma_mask()
with the corresponding DMA_xBIT_MASK from linux/dma-mapping.h.
This patch was made against 2.6.15-git9.
Signed-off-by: Matthias Gehre <M.Gehre@gmx.de>
---
Task was found on janitor.kernelnewbies.org
This is a new version of an early submitted patch.
The last version was made against 2.6.14.3 by accident.
Sorry for that! Triple checked now.
Please CC answer to me.
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/Documentation/DMA-mapping.txt linux-2.6.15-git9_patched/Documentation/DMA-mapping.txt
--- linux-2.6.15-git9/Documentation/DMA-mapping.txt 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git9_patched/Documentation/DMA-mapping.txt 2006-01-13 18:24:36.000000000 +0100
@@ -199,6 +199,8 @@
"mydev: 24-bit DMA addressing not available.\n");
goto ignore_this_device;
}
+[Better use DMA_24BIT_MASK instead of 0x00ffffff.
+See linux/include/dma-mapping.h for reference.]
When pci_set_dma_mask() is successful, and returns zero, the PCI layer
saves away this mask you have provided. The PCI layer will use this
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/atm/lanai.c linux-2.6.15-git9_patched/drivers/atm/lanai.c
--- linux-2.6.15-git9/drivers/atm/lanai.c 2006-01-13 18:21:22.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/atm/lanai.c 2006-01-13 18:24:36.000000000 +0100
@@ -1972,7 +1972,7 @@
"(itf %d): No suitable DMA available.\n", lanai->number);
return -EBUSY;
}
- if (pci_set_consistent_dma_mask(pci, 0xFFFFFFFF) != 0) {
+ if (pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK) != 0) {
printk(KERN_WARNING DEV_LABEL
"(itf %d): No suitable DMA available.\n", lanai->number);
return -EBUSY;
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/block/umem.c linux-2.6.15-git9_patched/drivers/block/umem.c
--- linux-2.6.15-git9/drivers/block/umem.c 2006-01-13 18:21:40.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/block/umem.c 2006-01-13 18:24:36.000000000 +0100
@@ -50,6 +50,7 @@
#include <linux/timer.h>
#include <linux/pci.h>
#include <linux/slab.h>
+#include <linux/dma-mapping.h>
#include <linux/fcntl.h> /* O_ACCMODE */
#include <linux/hdreg.h> /* HDIO_GETGEO */
@@ -881,8 +882,8 @@
printk(KERN_INFO "Micro Memory(tm) controller #%d found at %02x:%02x (PCI Mem Module (Battery Backup))\n",
card->card_number, dev->bus->number, dev->devfn);
- if (pci_set_dma_mask(dev, 0xffffffffffffffffLL) &&
- !pci_set_dma_mask(dev, 0xffffffffLL)) {
+ if (pci_set_dma_mask(dev, DMA_64BIT_MASK) &&
+ !pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "MM%d: NO suitable DMA found\n",num_cards);
return -ENOMEM;
}
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/net/forcedeth.c linux-2.6.15-git9_patched/drivers/net/forcedeth.c
--- linux-2.6.15-git9/drivers/net/forcedeth.c 2006-01-13 18:21:40.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/net/forcedeth.c 2006-01-13 18:24:36.000000000 +0100
@@ -131,6 +131,7 @@
#include <linux/random.h>
#include <linux/init.h>
#include <linux/if_vlan.h>
+#include <linux/dma-mapping.h>
#include <asm/irq.h>
#include <asm/io.h>
@@ -2467,7 +2468,7 @@
if (id->driver_data & DEV_HAS_HIGH_DMA) {
/* packet format 3: supports 40-bit addressing */
np->desc_ver = DESC_VER_3;
- if (pci_set_dma_mask(pci_dev, 0x0000007fffffffffULL)) {
+ if (pci_set_dma_mask(pci_dev, DMA_39BIT_MASK)) {
printk(KERN_INFO "forcedeth: 64-bit DMA failed, using 32-bit addressing for device %s.\n",
pci_name(pci_dev));
} else {
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/net/ioc3-eth.c linux-2.6.15-git9_patched/drivers/net/ioc3-eth.c
--- linux-2.6.15-git9/drivers/net/ioc3-eth.c 2006-01-13 18:21:24.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/net/ioc3-eth.c 2006-01-13 18:24:36.000000000 +0100
@@ -44,6 +44,7 @@
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/udp.h>
+#include <linux/dma-mapping.h>
#ifdef CONFIG_SERIAL_8250
#include <linux/serial_core.h>
@@ -1195,17 +1196,17 @@
int err, pci_using_dac;
/* Configure DMA attributes. */
- err = pci_set_dma_mask(pdev, 0xffffffffffffffffULL);
+ err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
if (!err) {
pci_using_dac = 1;
- err = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL);
+ err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
if (err < 0) {
printk(KERN_ERR "%s: Unable to obtain 64 bit DMA "
"for consistent allocations\n", pci_name(pdev));
goto out;
}
} else {
- err = pci_set_dma_mask(pdev, 0xffffffffULL);
+ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (err) {
printk(KERN_ERR "%s: No usable DMA configuration, "
"aborting.\n", pci_name(pdev));
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/net/ns83820.c linux-2.6.15-git9_patched/drivers/net/ns83820.c
--- linux-2.6.15-git9/drivers/net/ns83820.c 2006-01-13 18:21:40.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/net/ns83820.c 2006-01-13 18:24:36.000000000 +0100
@@ -1827,10 +1827,10 @@
int using_dac = 0;
/* See if we can set the dma mask early on; failure is fatal. */
- if (sizeof(dma_addr_t) == 8 &&
- !pci_set_dma_mask(pci_dev, 0xffffffffffffffffULL)) {
+ if (sizeof(dma_addr_t) == 8 &&
+ !pci_set_dma_mask(pci_dev, DMA_64BIT_MASK)) {
using_dac = 1;
- } else if (!pci_set_dma_mask(pci_dev, 0xffffffff)) {
+ } else if (!pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) {
using_dac = 0;
} else {
printk(KERN_WARNING "ns83820.c: pci_set_dma_mask failed!\n");
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/net/wan/wanxl.c linux-2.6.15-git9_patched/drivers/net/wan/wanxl.c
--- linux-2.6.15-git9/drivers/net/wan/wanxl.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/net/wan/wanxl.c 2006-01-13 18:24:39.000000000 +0100
@@ -577,8 +577,8 @@
We set both dma_mask and consistent_dma_mask to 28 bits
and pray pci_alloc_consistent() will use this info. It should
work on most platforms */
- if (pci_set_consistent_dma_mask(pdev, 0x0FFFFFFF) ||
- pci_set_dma_mask(pdev, 0x0FFFFFFF)) {
+ if (pci_set_consistent_dma_mask(pdev, DMA_28BIT_MASK) ||
+ pci_set_dma_mask(pdev, DMA_28BIT_MASK)) {
printk(KERN_ERR "wanXL: No usable DMA configuration\n");
return -EIO;
}
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/net/wireless/prism54/islpci_hotplug.c linux-2.6.15-git9_patched/drivers/net/wireless/prism54/islpci_hotplug.c
--- linux-2.6.15-git9/drivers/net/wireless/prism54/islpci_hotplug.c 2006-01-13 18:21:24.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/net/wireless/prism54/islpci_hotplug.c 2006-01-13 18:24:39.000000000 +0100
@@ -22,6 +22,7 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/init.h> /* For __init, __exit */
+#include <linux/dma-mapping.h>
#include "prismcompat.h"
#include "islpci_dev.h"
@@ -124,7 +125,7 @@
}
/* enable PCI DMA */
- if (pci_set_dma_mask(pdev, 0xffffffff)) {
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_ERR "%s: 32-bit PCI DMA not supported", DRV_NAME);
goto do_pci_disable_device;
}
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/scsi/a100u2w.c linux-2.6.15-git9_patched/drivers/scsi/a100u2w.c
--- linux-2.6.15-git9/drivers/scsi/a100u2w.c 2006-01-13 18:21:24.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/scsi/a100u2w.c 2006-01-13 18:24:39.000000000 +0100
@@ -89,6 +89,7 @@
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/slab.h>
+#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -1052,7 +1053,7 @@
if (pci_enable_device(pdev))
goto out;
- if (pci_set_dma_mask(pdev, 0xffffffffULL)) {
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "Unable to set 32bit DMA "
"on inia100 adapter, ignoring.\n");
goto out_disable_device;
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/scsi/aacraid/aachba.c linux-2.6.15-git9_patched/drivers/scsi/aacraid/aachba.c
--- linux-2.6.15-git9/drivers/scsi/aacraid/aachba.c 2006-01-13 18:21:24.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/scsi/aacraid/aachba.c 2006-01-13 18:24:39.000000000 +0100
@@ -32,6 +32,7 @@
#include <linux/slab.h>
#include <linux/completion.h>
#include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
#include <asm/semaphore.h>
#include <asm/uaccess.h>
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/scsi/aacraid/linit.c linux-2.6.15-git9_patched/drivers/scsi/aacraid/linit.c
--- linux-2.6.15-git9/drivers/scsi/aacraid/linit.c 2006-01-13 18:21:41.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/scsi/aacraid/linit.c 2006-01-13 18:31:49.000000000 +0100
@@ -48,6 +48,7 @@
#include <linux/syscalls.h>
#include <linux/delay.h>
#include <linux/smp_lock.h>
+#include <linux/dma-mapping.h>
#include <asm/semaphore.h>
#include <scsi/scsi.h>
@@ -761,8 +762,8 @@
* to driver communication memory to be allocated below 2gig
*/
if (aac_drivers[index].quirks & AAC_QUIRK_31BIT)
- if (pci_set_dma_mask(pdev, 0x7FFFFFFFULL) ||
- pci_set_consistent_dma_mask(pdev, 0x7FFFFFFFULL))
+ if (pci_set_dma_mask(pdev, DMA_31BIT_MASK) ||
+ pci_set_consistent_dma_mask(pdev, DMA_31BIT_MASK))
goto out;
pci_set_master(pdev);
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/scsi/atp870u.c linux-2.6.15-git9_patched/drivers/scsi/atp870u.c
--- linux-2.6.15-git9/drivers/scsi/atp870u.c 2006-01-13 18:21:24.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/scsi/atp870u.c 2006-01-13 18:24:40.000000000 +0100
@@ -28,6 +28,7 @@
#include <linux/spinlock.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -2631,7 +2632,7 @@
if (pci_enable_device(pdev))
return -EIO;
- if (!pci_set_dma_mask(pdev, 0xFFFFFFFFUL)) {
+ if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_INFO "atp870u: use 32bit DMA mask.\n");
} else {
printk(KERN_ERR "atp870u: DMA mask required but not available.\n");
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/scsi/BusLogic.c linux-2.6.15-git9_patched/drivers/scsi/BusLogic.c
--- linux-2.6.15-git9/drivers/scsi/BusLogic.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/scsi/BusLogic.c 2006-01-13 18:24:40.000000000 +0100
@@ -41,6 +41,7 @@
#include <linux/stat.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
#include <scsi/scsicam.h>
#include <asm/dma.h>
@@ -676,7 +677,7 @@
if (pci_enable_device(PCI_Device))
continue;
- if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
+ if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK ))
continue;
Bus = PCI_Device->bus->number;
@@ -831,7 +832,7 @@
if (pci_enable_device(PCI_Device))
continue;
- if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
+ if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK))
continue;
Bus = PCI_Device->bus->number;
@@ -885,7 +886,7 @@
if (pci_enable_device(PCI_Device))
continue;
- if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
+ if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK))
continue;
Bus = PCI_Device->bus->number;
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/scsi/dpt_i2o.c linux-2.6.15-git9_patched/drivers/scsi/dpt_i2o.c
--- linux-2.6.15-git9/drivers/scsi/dpt_i2o.c 2006-01-13 18:21:24.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/scsi/dpt_i2o.c 2006-01-13 18:24:40.000000000 +0100
@@ -57,6 +57,7 @@
#include <linux/reboot.h>
#include <linux/spinlock.h>
#include <linux/smp_lock.h>
+#include <linux/dma-mapping.h>
#include <linux/timer.h>
#include <linux/string.h>
@@ -899,8 +900,8 @@
return -EINVAL;
}
pci_set_master(pDev);
- if (pci_set_dma_mask(pDev, 0xffffffffffffffffULL) &&
- pci_set_dma_mask(pDev, 0xffffffffULL))
+ if (pci_set_dma_mask(pDev, DMA_64BIT_MASK) &&
+ pci_set_dma_mask(pDev, DMA_32BIT_MASK))
return -EINVAL;
base_addr0_phys = pci_resource_start(pDev,0);
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/scsi/eata.c linux-2.6.15-git9_patched/drivers/scsi/eata.c
--- linux-2.6.15-git9/drivers/scsi/eata.c 2006-01-13 18:21:24.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/scsi/eata.c 2006-01-13 18:24:40.000000000 +0100
@@ -490,6 +490,7 @@
#include <linux/init.h>
#include <linux/ctype.h>
#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
#include <asm/byteorder.h>
#include <asm/dma.h>
#include <asm/io.h>
@@ -1426,7 +1427,7 @@
if (ha->pdev) {
pci_set_master(ha->pdev);
- if (pci_set_dma_mask(ha->pdev, 0xffffffff))
+ if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK))
printk("%s: warning, pci_set_dma_mask failed.\n",
ha->board_name);
}
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/scsi/gdth.c linux-2.6.15-git9_patched/drivers/scsi/gdth.c
--- linux-2.6.15-git9/drivers/scsi/gdth.c 2006-01-13 18:21:24.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/scsi/gdth.c 2006-01-13 18:24:40.000000000 +0100
@@ -388,6 +388,7 @@
#include <linux/proc_fs.h>
#include <linux/time.h>
#include <linux/timer.h>
+#include <linux/dma-mapping.h>
#ifdef GDTH_RTC
#include <linux/mc146818rtc.h>
#endif
@@ -4527,15 +4528,15 @@
if (!(ha->cache_feat & ha->raw_feat & ha->screen_feat &GDT_64BIT)||
/* 64-bit DMA only supported from FW >= x.43 */
(!ha->dma64_support)) {
- if (pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffff)) {
+ if (pci_set_dma_mask(pcistr[ctr].pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "GDT-PCI %d: Unable to set 32-bit DMA\n", hanum);
err = TRUE;
}
} else {
shp->max_cmd_len = 16;
- if (!pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffffffffffffULL)) {
+ if (!pci_set_dma_mask(pcistr[ctr].pdev, DMA_64BIT_MASK)) {
printk("GDT-PCI %d: 64-bit DMA enabled\n", hanum);
- } else if (pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffff)) {
+ } else if (pci_set_dma_mask(pcistr[ctr].pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "GDT-PCI %d: Unable to set 64/32-bit DMA\n", hanum);
err = TRUE;
}
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/scsi/initio.c linux-2.6.15-git9_patched/drivers/scsi/initio.c
--- linux-2.6.15-git9/drivers/scsi/initio.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/scsi/initio.c 2006-01-13 18:24:40.000000000 +0100
@@ -127,6 +127,7 @@
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
+#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <scsi/scsi.h>
@@ -2780,7 +2781,7 @@
if (((dRegValue & 0xFF00) >> 8) == 0xFF)
dRegValue = 0;
wBIOS = (wBIOS << 8) + ((UWORD) ((dRegValue & 0xFF00) >> 8));
- if (pci_set_dma_mask(pDev, 0xffffffff)) {
+ if (pci_set_dma_mask(pDev, DMA_32BIT_MASK)) {
printk(KERN_WARNING
"i91u: Could not set 32 bit DMA mask\n");
continue;
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/scsi/ips.c linux-2.6.15-git9_patched/drivers/scsi/ips.c
--- linux-2.6.15-git9/drivers/scsi/ips.c 2006-01-13 18:21:24.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/scsi/ips.c 2006-01-13 18:24:40.000000000 +0100
@@ -179,6 +179,7 @@
#include <linux/blkdev.h>
#include <linux/types.h>
+#include <linux/dma-mapping.h>
#include <scsi/sg.h>
@@ -7279,10 +7280,10 @@
* are guaranteed to be < 4G.
*/
if (IPS_ENABLE_DMA64 && IPS_HAS_ENH_SGLIST(ha) &&
- !pci_set_dma_mask(ha->pcidev, 0xffffffffffffffffULL)) {
+ !pci_set_dma_mask(ha->pcidev, DMA_64BIT_MASK)) {
(ha)->flags |= IPS_HA_ENH_SG;
} else {
- if (pci_set_dma_mask(ha->pcidev, 0xffffffffULL) != 0) {
+ if (pci_set_dma_mask(ha->pcidev, DMA_32BIT_MASK) != 0) {
printk(KERN_WARNING "Unable to set DMA Mask\n");
return ips_abort_init(ha, index);
}
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/scsi/megaraid.c linux-2.6.15-git9_patched/drivers/scsi/megaraid.c
--- linux-2.6.15-git9/drivers/scsi/megaraid.c 2006-01-13 18:21:41.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/scsi/megaraid.c 2006-01-13 18:24:40.000000000 +0100
@@ -45,6 +45,7 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/dma-mapping.h>
#include <scsi/scsicam.h>
#include "scsi.h"
@@ -2094,7 +2095,7 @@
memcpy(*pdev, adapter->dev, sizeof(struct pci_dev));
- if( pci_set_dma_mask(*pdev, 0xffffffff) != 0 ) {
+ if( pci_set_dma_mask(*pdev, DMA_32BIT_MASK) != 0 ) {
kfree(*pdev);
return -1;
}
@@ -4859,10 +4860,10 @@
/* Set the Mode of addressing to 64 bit if we can */
if ((adapter->flag & BOARD_64BIT) && (sizeof(dma_addr_t) == 8)) {
- pci_set_dma_mask(pdev, 0xffffffffffffffffULL);
+ pci_set_dma_mask(pdev, DMA_64BIT_MASK);
adapter->has_64bit_addr = 1;
} else {
- pci_set_dma_mask(pdev, 0xffffffff);
+ pci_set_dma_mask(pdev, DMA_32BIT_MASK);
adapter->has_64bit_addr = 0;
}
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/scsi/nsp32.c linux-2.6.15-git9_patched/drivers/scsi/nsp32.c
--- linux-2.6.15-git9/drivers/scsi/nsp32.c 2006-01-13 18:21:24.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/scsi/nsp32.c 2006-01-13 18:24:40.000000000 +0100
@@ -38,6 +38,7 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
#include <asm/dma.h>
#include <asm/system.h>
@@ -2776,7 +2777,7 @@
/*
* setup DMA
*/
- if (pci_set_dma_mask(PCIDEV, 0xffffffffUL) != 0) {
+ if (pci_set_dma_mask(PCIDEV, DMA_32BIT_MASK) != 0) {
nsp32_msg (KERN_ERR, "failed to set PCI DMA mask");
goto scsi_unregister;
}
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/scsi/qla1280.c linux-2.6.15-git9_patched/drivers/scsi/qla1280.c
--- linux-2.6.15-git9/drivers/scsi/qla1280.c 2006-01-13 18:21:24.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/scsi/qla1280.c 2006-01-13 18:24:40.000000000 +0100
@@ -348,6 +348,7 @@
#include <linux/pci_ids.h>
#include <linux/interrupt.h>
#include <linux/init.h>
+#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -4569,7 +4570,7 @@
#ifdef QLA_64BIT_PTR
if (pci_set_dma_mask(ha->pdev, (dma_addr_t) ~ 0ULL)) {
- if (pci_set_dma_mask(ha->pdev, 0xffffffff)) {
+ if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "scsi(%li): Unable to set a "
"suitable DMA mask - aborting\n", ha->host_no);
error = -ENODEV;
@@ -4579,7 +4580,7 @@
dprintk(2, "scsi(%li): 64 Bit PCI Addressing Enabled\n",
ha->host_no);
#else
- if (pci_set_dma_mask(ha->pdev, 0xffffffff)) {
+ if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "scsi(%li): Unable to set a "
"suitable DMA mask - aborting\n", ha->host_no);
error = -ENODEV;
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/drivers/scsi/qlogicfc.c linux-2.6.15-git9_patched/drivers/scsi/qlogicfc.c
--- linux-2.6.15-git9/drivers/scsi/qlogicfc.c 2006-01-13 18:21:24.000000000 +0100
+++ linux-2.6.15-git9_patched/drivers/scsi/qlogicfc.c 2006-01-13 18:24:40.000000000 +0100
@@ -61,6 +61,7 @@
#include <linux/unistd.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/irq.h>
#include "scsi.h"
@@ -737,8 +738,8 @@
continue;
/* Try to configure DMA attributes. */
- if (pci_set_dma_mask(pdev, 0xffffffffffffffffULL) &&
- pci_set_dma_mask(pdev, 0xffffffffULL))
+ if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
+ pci_set_dma_mask(pdev, DMA_32BIT_MASK))
continue;
host = scsi_register(tmpt, sizeof(struct isp2x00_hostdata));
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/include/linux/dma-mapping.h linux-2.6.15-git9_patched/include/linux/dma-mapping.h
--- linux-2.6.15-git9/include/linux/dma-mapping.h 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git9_patched/include/linux/dma-mapping.h 2006-01-13 18:24:40.000000000 +0100
@@ -20,6 +20,8 @@
#define DMA_31BIT_MASK 0x000000007fffffffULL
#define DMA_30BIT_MASK 0x000000003fffffffULL
#define DMA_29BIT_MASK 0x000000001fffffffULL
+#define DMA_28BIT_MASK 0x000000000fffffffULL
+#define DMA_24BIT_MASK 0x0000000000ffffffULL
#include <asm/dma-mapping.h>
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/sound/oss/esssolo1.c linux-2.6.15-git9_patched/sound/oss/esssolo1.c
--- linux-2.6.15-git9/sound/oss/esssolo1.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git9_patched/sound/oss/esssolo1.c 2006-01-13 18:24:40.000000000 +0100
@@ -2346,7 +2346,7 @@
/* Recording requires 24-bit DMA, so attempt to set dma mask
* to 24 bits first, then 32 bits (playback only) if that fails.
*/
- if (pci_set_dma_mask(pcidev, 0x00ffffff) &&
+ if (pci_set_dma_mask(pcidev, DMA_24BIT_MASK) &&
pci_set_dma_mask(pcidev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "solo1: architecture does not support 24bit or 32bit PCI busmaster DMA\n");
return -ENODEV;
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/sound/oss/sonicvibes.c linux-2.6.15-git9_patched/sound/oss/sonicvibes.c
--- linux-2.6.15-git9/sound/oss/sonicvibes.c 2006-01-13 18:21:43.000000000 +0100
+++ linux-2.6.15-git9_patched/sound/oss/sonicvibes.c 2006-01-13 18:24:40.000000000 +0100
@@ -116,6 +116,7 @@
#include <linux/spinlock.h>
#include <linux/smp_lock.h>
#include <linux/gameport.h>
+#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -2551,7 +2552,7 @@
return -ENODEV;
if (pcidev->irq == 0)
return -ENODEV;
- if (pci_set_dma_mask(pcidev, 0x00ffffff)) {
+ if (pci_set_dma_mask(pcidev, DMA_24BIT_MASK)) {
printk(KERN_WARNING "sonicvibes: architecture does not support 24bit PCI busmaster DMA\n");
return -ENODEV;
}
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/sound/pci/ad1889.c linux-2.6.15-git9_patched/sound/pci/ad1889.c
--- linux-2.6.15-git9/sound/pci/ad1889.c 2006-01-13 18:21:43.000000000 +0100
+++ linux-2.6.15-git9_patched/sound/pci/ad1889.c 2006-01-13 18:24:40.000000000 +0100
@@ -38,6 +38,7 @@
#include <linux/interrupt.h>
#include <linux/compiler.h>
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
#include <sound/driver.h>
#include <sound/core.h>
@@ -911,8 +912,8 @@
return err;
/* check PCI availability (32bit DMA) */
- if (pci_set_dma_mask(pci, 0xffffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0xffffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_32BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK) < 0) {
printk(KERN_ERR PFX "error setting 32-bit DMA mask.\n");
pci_disable_device(pci);
return -ENXIO;
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/sound/pci/ali5451/ali5451.c linux-2.6.15-git9_patched/sound/pci/ali5451/ali5451.c
--- linux-2.6.15-git9/sound/pci/ali5451/ali5451.c 2006-01-13 18:21:43.000000000 +0100
+++ linux-2.6.15-git9_patched/sound/pci/ali5451/ali5451.c 2006-01-13 18:24:40.000000000 +0100
@@ -33,6 +33,7 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/info.h>
@@ -2220,8 +2221,8 @@
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 31 bits */
- if (pci_set_dma_mask(pci, 0x7fffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0x7fffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_31BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_31BIT_MASK) < 0) {
snd_printk(KERN_ERR "architecture does not support 31bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/sound/pci/als4000.c linux-2.6.15-git9_patched/sound/pci/als4000.c
--- linux-2.6.15-git9/sound/pci/als4000.c 2006-01-13 18:21:43.000000000 +0100
+++ linux-2.6.15-git9_patched/sound/pci/als4000.c 2006-01-13 18:24:40.000000000 +0100
@@ -70,6 +70,7 @@
#include <linux/slab.h>
#include <linux/gameport.h>
#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/rawmidi.h>
@@ -688,8 +689,8 @@
return err;
}
/* check, if we can restrict PCI DMA transfers to 24 bits */
- if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) {
snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/sound/pci/azt3328.c linux-2.6.15-git9_patched/sound/pci/azt3328.c
--- linux-2.6.15-git9/sound/pci/azt3328.c 2006-01-13 18:21:43.000000000 +0100
+++ linux-2.6.15-git9_patched/sound/pci/azt3328.c 2006-01-13 18:24:40.000000000 +0100
@@ -104,6 +104,7 @@
#include <linux/slab.h>
#include <linux/gameport.h>
#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/pcm.h>
@@ -1669,8 +1670,8 @@
chip->irq = -1;
/* check if we can restrict PCI DMA transfers to 24 bits */
- if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) {
snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
err = -ENXIO;
goto out_err;
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/sound/pci/emu10k1/emu10k1x.c linux-2.6.15-git9_patched/sound/pci/emu10k1/emu10k1x.c
--- linux-2.6.15-git9/sound/pci/emu10k1/emu10k1x.c 2006-01-13 18:21:43.000000000 +0100
+++ linux-2.6.15-git9_patched/sound/pci/emu10k1/emu10k1x.c 2006-01-13 18:24:40.000000000 +0100
@@ -35,6 +35,7 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/pcm.h>
@@ -898,8 +899,8 @@
if ((err = pci_enable_device(pci)) < 0)
return err;
- if (pci_set_dma_mask(pci, 0x0fffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0x0fffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
snd_printk(KERN_ERR "error to set 28bit mask DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/sound/pci/es1938.c linux-2.6.15-git9_patched/sound/pci/es1938.c
--- linux-2.6.15-git9/sound/pci/es1938.c 2006-01-13 18:21:43.000000000 +0100
+++ linux-2.6.15-git9_patched/sound/pci/es1938.c 2006-01-13 18:24:40.000000000 +0100
@@ -55,6 +55,7 @@
#include <linux/gameport.h>
#include <linux/moduleparam.h>
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/pcm.h>
@@ -1517,8 +1518,8 @@
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 24 bits */
- if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) {
snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/sound/pci/es1968.c linux-2.6.15-git9_patched/sound/pci/es1968.c
--- linux-2.6.15-git9/sound/pci/es1968.c 2006-01-13 18:21:43.000000000 +0100
+++ linux-2.6.15-git9_patched/sound/pci/es1968.c 2006-01-13 18:24:40.000000000 +0100
@@ -103,6 +103,7 @@
#include <linux/slab.h>
#include <linux/gameport.h>
#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/mpu401.h>
@@ -2559,8 +2560,8 @@
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 28 bits */
- if (pci_set_dma_mask(pci, 0x0fffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0x0fffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/sound/pci/ice1712/ice1712.c linux-2.6.15-git9_patched/sound/pci/ice1712/ice1712.c
--- linux-2.6.15-git9/sound/pci/ice1712/ice1712.c 2006-01-13 18:21:43.000000000 +0100
+++ linux-2.6.15-git9_patched/sound/pci/ice1712/ice1712.c 2006-01-13 18:24:40.000000000 +0100
@@ -55,6 +55,7 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/cs8427.h>
#include <sound/info.h>
@@ -2538,8 +2539,8 @@
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 28 bits */
- if (pci_set_dma_mask(pci, 0x0fffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0x0fffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/sound/pci/maestro3.c linux-2.6.15-git9_patched/sound/pci/maestro3.c
--- linux-2.6.15-git9/sound/pci/maestro3.c 2006-01-13 18:21:43.000000000 +0100
+++ linux-2.6.15-git9_patched/sound/pci/maestro3.c 2006-01-13 18:24:40.000000000 +0100
@@ -40,6 +40,7 @@
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>
@@ -2657,8 +2658,8 @@
return -EIO;
/* check, if we can restrict PCI DMA transfers to 28 bits */
- if (pci_set_dma_mask(pci, 0x0fffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0x0fffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/sound/pci/mixart/mixart.c linux-2.6.15-git9_patched/sound/pci/mixart/mixart.c
--- linux-2.6.15-git9/sound/pci/mixart/mixart.c 2006-01-13 18:21:43.000000000 +0100
+++ linux-2.6.15-git9_patched/sound/pci/mixart/mixart.c 2006-01-13 18:24:40.000000000 +0100
@@ -26,6 +26,7 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/info.h>
@@ -1288,7 +1289,7 @@
pci_set_master(pci);
/* check if we can restrict PCI DMA transfers to 32 bits */
- if (pci_set_dma_mask(pci, 0xffffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_32BIT_MASK) < 0) {
snd_printk(KERN_ERR "architecture does not support 32bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/sound/pci/pcxhr/pcxhr.c linux-2.6.15-git9_patched/sound/pci/pcxhr/pcxhr.c
--- linux-2.6.15-git9/sound/pci/pcxhr/pcxhr.c 2006-01-13 18:21:43.000000000 +0100
+++ linux-2.6.15-git9_patched/sound/pci/pcxhr/pcxhr.c 2006-01-13 18:39:56.000000000 +0100
@@ -28,6 +28,7 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/info.h>
@@ -1214,7 +1215,7 @@
pci_set_master(pci);
/* check if we can restrict PCI DMA transfers to 32 bits */
- if (pci_set_dma_mask(pci, 0xffffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_32BIT_MASK) < 0) {
snd_printk(KERN_ERR "architecture does not support 32bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/sound/pci/sonicvibes.c linux-2.6.15-git9_patched/sound/pci/sonicvibes.c
--- linux-2.6.15-git9/sound/pci/sonicvibes.c 2006-01-13 18:21:43.000000000 +0100
+++ linux-2.6.15-git9_patched/sound/pci/sonicvibes.c 2006-01-13 18:24:40.000000000 +0100
@@ -30,6 +30,7 @@
#include <linux/slab.h>
#include <linux/gameport.h>
#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/pcm.h>
@@ -1227,8 +1228,8 @@
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 24 bits */
- if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) {
snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff -urN -X linux-2.6.15-git9/Documentation/dontdiff linux-2.6.15-git9/sound/pci/trident/trident_main.c linux-2.6.15-git9_patched/sound/pci/trident/trident_main.c
--- linux-2.6.15-git9/sound/pci/trident/trident_main.c 2006-01-13 18:21:43.000000000 +0100
+++ linux-2.6.15-git9_patched/sound/pci/trident/trident_main.c 2006-01-13 18:26:21.000000000 +0100
@@ -35,6 +35,7 @@
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/gameport.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/info.h>
@@ -3554,8 +3555,8 @@
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 30 bits */
- if (pci_set_dma_mask(pci, 0x3fffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0x3fffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_30BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_30BIT_MASK) < 0) {
snd_printk(KERN_ERR "architecture does not support 30bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
reply other threads:[~2006-01-13 18:09 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43C7EEF0.8070300@gmx.de \
--to=m.gehre@gmx.de \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.