From: Uwe Koziolek <uwe.koziolek@gmx.net>
To: Chris Bamford <chris@bammers.net>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
bcollins@ubuntu.com, linux-ide@vger.kernel.org, touch@sis.com
Subject: Re: sata_sis on Ubuntu 5.10
Date: Mon, 23 Jan 2006 22:15:08 +0100 [thread overview]
Message-ID: <43D5475C.1030007@gmx.net> (raw)
In-Reply-To: <43D542AD.40905@bammers.net>
Hello Chris,
please try the live-CD Kanotix 2005-04 (http://kanotix.com). This CD
includes the actual sata_sis driver.
It is Debian based. I have tested the sata_sis driver using this CD.
regards
Uwe Koziolek
Chris Bamford schrieb:
> Hi Bartlomiej,
>
> Thanks for the response! I attach a file containing (I hope) all the
> answers to your questions.
> Please shout if you need more.
>
> Thanks,
>
> - Chris
>
> Bartlomiej Zolnierkiewicz wrote:
>
>> On 1/22/06, Chris Bamford <chris@bammers.net> wrote:
>>
>>
>>> Hi Uwe,
>>>
>>> I have been unsuccessfully trying to get Linux to work with my SATA
>>> disk
>>> on my ASUS Vintage AE-1 barebone machine.
>>>
>>> I have posted to the ASUS support site (see
>>> http://vip.asus.com/eservice/techmailstatus.aspx?ID=WTM200601212130302557),
>>>
>>> and am still waiting for a reply.
>>> For more background on the problem, please see the attached message
>>> which I sent to the ubuntu-users mailing list - which did not produce
>>> any answers.
>>>
>>
>>
>> Thread is here:
>> https://lists.ubuntu.com/archives/ubuntu-users/2006-January/063781.html
>>
>>
>>
>>> The BIOS can see the SATA disk, but Linux does not!
>>> If I type "lsmod | grep -i ata" it returns nothing (no 'ata' drivers
>>> loaded). If I type 'locate sata_sis', it finds 2 copies, so I assume it
>>> should be OK if I load the drivers with modprobe:
>>>
>>> mobprobe sat_sis
>>> modprobe ata
>>>
>>> "lsmod | grep -i ata" now shows them loaded, but what do I do next?
>>> the
>>> devices /dev/sd* are not present, so I cannot access the disk. Am I
>>> missing a step?
>>>
>>
>>
>> Don't know, you didn't send output of lsmod command.
>>
>> Does loading sata_sis module produces any messages?
>>
>>
>>
>>> I tried to build the driver from the sources provided on the CD with
>>> the
>>> machine, but it would not build (filesystem layout differences between
>>> Fedora and Debian??).
>>>
>>> Anyway, please help!
>>>
>>> Any pointers/info/etc would be gratefully received.
>>>
>>
>>
>> What kernel version are you using?
>> What is the lspci -vvv output?
>>
>> AFAICS:
>>
>> * Ubuntu 5.10 is based on kernel 2.6.12.6
>> * SiS 182 support was added in kernel 2.6.14
>>
>> Ben, any suggestion?
>>
>> Thanks,
>> Bartlomiej
>>
>>
>
>------------------------------------------------------------------------
>
>Script started on Mon 23 Jan 2006 20:34:45 GMT
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# lsmod | grep -i ata
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# lsmod
>Module Size Used by
>rfcomm 34972 0
>l2cap 22404 5 rfcomm
>bluetooth 43012 4 rfcomm,l2cap
>cpufreq_userspace 4444 0
>cpufreq_stats 5124 0
>freq_table 4484 1 cpufreq_stats
>cpufreq_powersave 1920 0
>cpufreq_ondemand 5916 0
>cpufreq_conservative 6820 0
>video 16004 0
>tc1100_wmi 6916 0
>sony_acpi 5516 0
>pcc_acpi 11392 0
>hotkey 9508 0
>dev_acpi 11396 0
>i2c_acpi_ec 5760 0
>i2c_core 19728 1 i2c_acpi_ec
>button 6672 0
>battery 9604 0
>container 4608 0
>ac 4996 0
>ipv6 217408 8
>af_packet 20232 2
>tsdev 7616 0
>floppy 52692 0
>pcspkr 3652 0
>rtc 11832 0
>snd_intel8x0 30144 0
>snd_ac97_codec 72188 1 snd_intel8x0
>snd_pcm_oss 46368 0
>snd_mixer_oss 16128 1 snd_pcm_oss
>snd_pcm 78344 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
>snd_timer 21764 1 snd_pcm
>snd 48644 6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
>soundcore 9184 1 snd
>snd_page_alloc 10120 2 snd_intel8x0,snd_pcm
>shpchp 80612 0
>pci_hotplug 24628 1 shpchp
>sis_agp 8452 1
>agpgart 32328 1 sis_agp
>dm_mod 50364 1
>evdev 9088 0
>psmouse 26116 0
>mousedev 10912 0
>parport_pc 31812 1
>lp 11460 0
>parport 32072 2 parport_pc,lp
>md 40656 0
>ext3 115976 1
>jbd 48536 1 ext3
>thermal 13192 0
>processor 23100 1 thermal
>fan 4740 0
>usbhid 30688 0
>3c59x 37544 0
>mii 5248 1 3c59x
>ehci_hcd 29448 0
>ohci_hcd 18564 0
>usbcore 104316 4 usbhid,ehci_hcd,ohci_hcd
>ide_cd 36996 0
>cdrom 33952 1 ide_cd
>ide_disk 16128 3
>ide_generic 1664 0
>sis5513 14472 2
>ide_core 125268 4 ide_cd,ide_disk,ide_generic,sis5513
>unix 24624 64
>vesafb 8088 0
>capability 5000 0
>commoncap 6784 1 capability
>vga16fb 12232 1
>vgastate 8320 1 vga16fb
>softcursor 2432 2 vesafb,vga16fb
>cfbimgblt 2944 2 vesafb,vga16fb
>cfbfillrect 3840 2 vesafb,vga16fb
>cfbcopyarea 4480 2 vesafb,vga16fb
>fbcon 34176 72
>tileblit 2560 1 fbcon
>font 8448 1 fbcon
>bitblit 5248 1 fbcon
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# tail -2 /var/log/messages
>Jan 23 20:34:18 localhost kernel: [4294755.955000] Bluetooth: RFCOMM socket layer initialized
>Jan 23 20:34:18 localhost kernel: [4294755.955000] Bluetooth: RFCOMM TTY layer initialized
>root@ubuntu:~# date
>Mon Jan 23 20:35:51 GMT 2006
>root@ubuntu:~# locate sata_sis
>/lib/modules/2.6.12-9-386/kernel/drivers/scsi/sata_sis.ko
>/lib/modules/2.6.12-10-386/kernel/drivers/scsi/sata_sis.ko
>/usr/src/kernel-source-2.6.11/drivers/scsi/sata_sis.c
>/home/chris/Desktop/sis18x_2.6.10_1.00.00/sata_sis.c
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# modprobe sata_sis
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# tail -2 /var/log/messages
>Jan 23 20:34:18 localhost kernel: [4294755.955000] Bluetooth: RFCOMM TTY layer initialized
>Jan 23 20:36:35 localhost kernel: [4294892.460000] SCSI subsystem initialized
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# lsmod | grep -i ata
>sata_sis 7552 0
>libata 47876 1 sata_sis
>scsi_mod 124872 1 libata
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# ls -l /dev/sd*
>ls: /dev/sd*: No such file or directory
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# cat /proc/version
>Linux version 2.6.12-10-386 (buildd@rothera) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8)) #1 Mon Jan 16 17:18:08 UTC 2006
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# lspci -vvv
>0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03)
> Subsystem: Asustek Computer, Inc.: Unknown device 8159
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 64
> Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=64M]
> Capabilities: [a0] AGP version 3.0
> Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
> Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
> Capabilities: [d0] #08 [0120]
> Capabilities: [f0] #08 [8000]
>
>0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202 (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> I/O behind bridge: 0000c000-0000cfff
> Memory behind bridge: fbf00000-fbffffff
> Prefetchable memory behind bridge: e8000000-f3ffffff
> BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>
>0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS965 [MuTIOL Media IO] (rev 48)
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
>
>0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) (prog-if 80 [Master])
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 128
> Region 0: I/O ports at <unassigned>
> Region 1: I/O ports at <unassigned>
> Region 2: I/O ports at <unassigned>
> Region 3: I/O ports at <unassigned>
> Region 4: I/O ports at ffa0 [size=16]
> Capabilities: [58] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
> Subsystem: Asustek Computer, Inc.: Unknown device 810d
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (13000ns min, 2750ns max)
> Interrupt: pin C routed to IRQ 18
> Region 0: I/O ports at b800 [size=256]
> Region 1: I/O ports at b400 [size=128]
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (20000ns max)
> Interrupt: pin A routed to IRQ 20
> Region 0: Memory at fbefc000 (32-bit, non-prefetchable) [size=4K]
>
>0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (20000ns max)
> Interrupt: pin B routed to IRQ 21
> Region 0: Memory at fbefd000 (32-bit, non-prefetchable) [size=4K]
>
>0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (20000ns max)
> Interrupt: pin C routed to IRQ 22
> Region 0: Memory at fbefe000 (32-bit, non-prefetchable) [size=4K]
>
>0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (20000ns max)
> Interrupt: pin D routed to IRQ 23
> Region 0: Memory at fbeff000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS]: Unknown device 0190
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at fbefbc00 (32-bit, non-prefetchable) [size=128]
> Region 1: I/O ports at b000 [size=128]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
>
>0000:00:05.0 IDE interface: Silicon Integrated Systems [SiS]: Unknown device 0182 (rev 01) (prog-if 85 [Master SecO PriO])
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Interrupt: pin A routed to IRQ 10
> Region 0: I/O ports at a800 [size=8]
> Region 1: I/O ports at a400 [size=4]
> Region 2: I/O ports at a000 [size=8]
> Region 3: I/O ports at 9800 [size=4]
> Region 4: I/O ports at 9400 [size=16]
> Region 5: I/O ports at 9000 [size=128]
> Capabilities: [58] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:00:06.0 PCI bridge: Silicon Integrated Systems [SiS]: Unknown device 000a (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 0x10 (64 bytes)
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
> BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> Capabilities: [f4] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:00:07.0 PCI bridge: Silicon Integrated Systems [SiS]: Unknown device 000a (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 0x10 (64 bytes)
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 0000e000-0000efff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
> BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> Capabilities: [f4] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:00:09.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (750ns min, 2000ns max)
> Interrupt: pin A routed to IRQ 16
> Region 0: I/O ports at 8800 [size=64]
> Expansion ROM at fbee0000 [disabled] [size=64K]
>
>0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Capabilities: [80] #08 [2101]
>
>0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX/741/M741/760/M760 PCI/AGP (prog-if 00 [VGA])
> Subsystem: Asustek Computer, Inc.: Unknown device 8159
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> BIST result: 00
> Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
> Region 1: Memory at fbfe0000 (32-bit, non-prefetchable) [size=128K]
> Region 2: I/O ports at c800 [size=128]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] AGP version 3.0
> Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
>
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>Script done on Mon 23 Jan 2006 20:39:43 GMT
>
>
next prev parent reply other threads:[~2006-01-23 21:12 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-22 20:55 sata_sis on Ubuntu 5.10 Chris Bamford
2006-01-23 13:47 ` Bartlomiej Zolnierkiewicz
2006-01-23 20:55 ` Chris Bamford
2006-01-23 21:15 ` Uwe Koziolek [this message]
2006-01-24 9:06 ` Chris Bamford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43D5475C.1030007@gmx.net \
--to=uwe.koziolek@gmx.net \
--cc=bcollins@ubuntu.com \
--cc=bzolnier@gmail.com \
--cc=chris@bammers.net \
--cc=linux-ide@vger.kernel.org \
--cc=touch@sis.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.