From: Nicola Murino <n.murino@theorematica.it>
To: device-mapper development <dm-devel@redhat.com>, bernd@bzed.de
Subject: Re: EMC CX LUN problem
Date: Wed, 25 Jan 2006 09:09:40 +0100 [thread overview]
Message-ID: <43D73244.50809@theorematica.it> (raw)
In-Reply-To: <43D6D16D.1060909@bzed.de>
[-- Attachment #1.1: Type: text/plain, Size: 8906 bytes --]
Hi thanks all for your help,
I have two raid group, each raid group has two lun, the lun of the first
raid group are for a linux cluster, the lun of the second raid group are
for a windows cluster,
I installed navicli, this is the output you requested:
./navicli -h 192.168.2.11 getlun
Statistics logging is disabled.
Certain fields are not printed if statistics
logging is not enabled.
LOGICAL UNIT NUMBER 0
Prefetch size (blocks) = 0
Prefetch multiplier = 4
Segment size (blocks) = 0
Segment multiplier = 4
Maximum prefetch (blocks) = 4096
Prefetch Disable Size (blocks) = 4097
Prefetch idle count = 40
Variable length prefetching YES
Prefetched data retained YES
Read cache configured according to
specified parameters.
Total Hard Errors: 0
Total Soft Errors: 0
Total Queue Length: 0
Name ql
Minimum latency reads N/A
RAID Type: RAID5
RAIDGroup ID: 0
State: Bound
Stripe Crossing: 0
Element Size: 128
Current owner: SP B
Offset: 0
Auto-trespass: DISABLED
Auto-assign: DISABLED
Write cache: ENABLED
Read cache: ENABLED
Idle Threshold: 0
Idle Delay Time: 20
Write Aside Size: 2048
Default Owner: SP B
Rebuild Priority: ASAP
Verify Priority: ASAP
Prct Reads Forced Flushed: 0
Prct Writes Forced Flushed: 0
Prct Rebuilt: 100
Prct Bound: 100
LUN Capacity(Megabytes): 512000
LUN Capacity(Blocks): 1048576000
UID: 60:06:01:60:86:F0:16:00:BE:5A:CA:73:DB:8C:DA:11
Is Private: NO
Snapshots List: None
MirrorView Name if any: Not Mirrored
LOGICAL UNIT NUMBER 2
Prefetch size (blocks) = 0
Prefetch multiplier = 4
Segment size (blocks) = 0
Segment multiplier = 4
Maximum prefetch (blocks) = 4096
Prefetch Disable Size (blocks) = 4097
Prefetch idle count = 40
Variable length prefetching YES
Prefetched data retained YES
Read cache configured according to
specified parameters.
Total Hard Errors: 0
Total Soft Errors: 0
Total Queue Length: 0
Name win
Minimum latency reads N/A
RAID Type: RAID5
RAIDGroup ID: 1
State: Bound
Stripe Crossing: 0
Element Size: 128
Current owner: SP A
Offset: 0
Auto-trespass: DISABLED
Auto-assign: DISABLED
Write cache: ENABLED
Read cache: ENABLED
Idle Threshold: 0
Idle Delay Time: 20
Write Aside Size: 2048
Default Owner: SP A
Rebuild Priority: ASAP
Verify Priority: ASAP
Prct Reads Forced Flushed: 0
Prct Writes Forced Flushed: 0
Prct Rebuilt: 100
Prct Bound: 100
LUN Capacity(Megabytes): 819200
LUN Capacity(Blocks): 1677721600
UID: 60:06:01:60:86:F0:16:00:B6:2F:72:8B:DB:8C:DA:11
Is Private: NO
Snapshots List: None
MirrorView Name if any: Not Mirrored
LOGICAL UNIT NUMBER 3
Prefetch size (blocks) = 0
Prefetch multiplier = 4
Segment size (blocks) = 0
Segment multiplier = 4
Maximum prefetch (blocks) = 4096
Prefetch Disable Size (blocks) = 4097
Prefetch idle count = 40
Variable length prefetching YES
Prefetched data retained YES
Read cache configured according to
specified parameters.
Total Hard Errors: 0
Total Soft Errors: 0
Total Queue Length: 0
Name quorum
Minimum latency reads N/A
RAID Type: RAID5
RAIDGroup ID: 1
State: Bound
Stripe Crossing: 0
Element Size: 128
Current owner: SP A
Offset: 0
Auto-trespass: DISABLED
Auto-assign: DISABLED
Write cache: ENABLED
Read cache: ENABLED
Idle Threshold: 0
Idle Delay Time: 20
Write Aside Size: 2048
Default Owner: SP A
Rebuild Priority: ASAP
Verify Priority: ASAP
Prct Reads Forced Flushed: 0
Prct Writes Forced Flushed: 0
Prct Rebuilt: 100
Prct Bound: 100
LUN Capacity(Megabytes): 5120
LUN Capacity(Blocks): 10485760
UID: 60:06:01:60:86:F0:16:00:FC:D3:8B:91:DB:8C:DA:11
Is Private: NO
Snapshots List: None
MirrorView Name if any: Not Mirrored
LOGICAL UNIT NUMBER 1
Prefetch size (blocks) = 0
Prefetch multiplier = 4
Segment size (blocks) = 0
Segment multiplier = 4
Maximum prefetch (blocks) = 4096
Prefetch Disable Size (blocks) = 4097
Prefetch idle count = 40
Variable length prefetching YES
Prefetched data retained YES
Read cache configured according to
specified parameters.
Total Hard Errors: 0
Total Soft Errors: 0
Total Queue Length: 0
Name mail
Minimum latency reads N/A
RAID Type: RAID5
RAIDGroup ID: 0
State: Bound
Stripe Crossing: 0
Element Size: 128
Current owner: SP B
Offset: 0
Auto-trespass: DISABLED
Auto-assign: DISABLED
Write cache: ENABLED
Read cache: ENABLED
Idle Threshold: 0
Idle Delay Time: 20
Write Aside Size: 2048
Default Owner: SP B
Rebuild Priority: ASAP
Verify Priority: ASAP
Prct Reads Forced Flushed: 0
Prct Writes Forced Flushed: 0
Prct Rebuilt: 100
Prct Bound: 100
LUN Capacity(Megabytes): 153600
LUN Capacity(Blocks): 314572800
UID: 60:06:01:60:86:F0:16:00:E4:6F:56:7A:DB:8C:DA:11
Is Private: NO
Snapshots List: None
MirrorView Name if any: Not Mirrored
the output of scsi_id is the same:
server2 block # scsi_id -g -u -s /block/sdb
36006016086f01600e46f567adb8cda11
server2 block # scsi_id -g -u -s /block/sdc
36006016086f01600e46f567adb8cda11
server2 block # scsi_id -g -u -s /block/sdd
36006016086f01600e46f567adb8cda11
server2 block # scsi_id -g -u -s /block/sde
36006016086f01600e46f567adb8cda11
server2 block # scsi_id -g -u -s /block/sdf
36006016086f01600e46f567adb8cda11
server2 block # scsi_id -g -u -s /block/sdg
36006016086f01600e46f567adb8cda11
server2 block # scsi_id -g -u -s /block/sdh
36006016086f01600e46f567adb8cda11
server2 block # scsi_id -g -u -s /block/sdi
36006016086f01600e46f567adb8cda11
I can see and write only on the LUN called mail, I'm not able to see ql
thanks for your help,
regards
Nicola
Bernd Zeimetz ha scritto:
> Hi,
>
>
>>> I'm trying to configure a new emc cx storage, I have the following:
>>>
>>>
>>> I defined two lun on the storage however I'm able to see only one LUN
>>>
>>> multipath -l show the following:
>>>
>>> multipath -l
>>> mail (36006016086f01600e46f567adb8cda11)
>>> [size=150 GB][features="1 queue_if_no_path"][hwhandler="1 emc"]
>>> \_ round-robin 0 [active]
>>> \_ 1:0:1:0 sdd 8:48 [active][ready]
>>> \_ 1:0:1:1 sde 8:64 [active][ready]
>>> \_ 2:0:1:0 sdh 8:112 [active][ready]
>>> \_ 2:0:1:1 sdi 8:128 [active][ready]
>>> \_ round-robin 0 [enabled]
>>> \_ 2:0:0:0 sdf 8:80 [active][ready]
>>> \_ 1:0:0:0 sdb 8:16 [active][ready]
>>> \_ 1:0:0:1 sdc 8:32 [active][ready]
>>> \_ 2:0:0:1 sdg 8:96 [active][ready]
>>>
>>>
>>>
>>>
> did you probably just share one raid group via 2 LUNs? Then the output
> of multipath is imho indeed right. For me it shows the setup you've
> described - one raidgroup, shared via 2 LUNs (usually one per default on
> SP A, one on SP B, attached via 2 paths per SP to a switch, accessed
> from your server via 2 HBAs.
> If you have access to the Navisphere cli tool - please post the output of
>
> ./navicli -h IP_OF_ONE_OF_YOUR_SPs getlun
>
> I think this will show that my hint is right.
> Imho you want to create a second raid group and share it via 2 LUNs, too.
>
>
>> http://christophe.varoqui.free.fr/wiki/wakka.php?wiki=TestedEnvironments
>>
>>
>>
> I hope there's nothing wring with the stuff I've written about the
> EMC/CX in there, if you find anything please let me know - I don't look
> in there often.
>
>
> Hope that helps,
>
> best regards
>
>
> Bernd
>
> --
> dm-devel mailing list
> dm-devel@redhat.com
> https://www.redhat.com/mailman/listinfo/dm-devel
>
>
[-- Attachment #1.2: Type: text/html, Size: 19341 bytes --]
[-- Attachment #2: Type: text/plain, Size: 0 bytes --]
next prev parent reply other threads:[~2006-01-25 8:09 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-24 21:31 EMC CX LUN problem Nicola Murino
2006-01-24 22:28 ` Brian Wong
2006-01-25 1:16 ` Bernd Zeimetz
2006-01-25 8:09 ` Nicola Murino [this message]
2006-01-25 9:05 ` Nicola Murino
2006-01-25 9:21 ` Nicola Murino
2006-01-25 9:35 ` Hannes Reinecke
2006-01-25 19:42 ` EMC CX LUN problem [SOLVED] Nicola Murino
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43D73244.50809@theorematica.it \
--to=n.murino@theorematica.it \
--cc=bernd@bzed.de \
--cc=dm-devel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.