From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sascha Kloss Subject: Solution for Dothan-CPU speedstep, Frequency below 600MHz and dynamic Vcore change Date: Mon, 30 Jan 2006 21:01:32 +0000 Message-ID: <43DE7EAC.5000901@gmx.de> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------020304060108040801020406" Return-path: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: cpufreq-bounces@lists.linux.org.uk Errors-To: cpufreq-bounces+glkc-cpufreq=m.gmane.org+glkc-cpufreq=m.gmane.org@lists.linux.org.uk To: cpufreq@lists.linux.org.uk This is a multi-part message in MIME format. --------------020304060108040801020406 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello all, as already discovered by many others, the dothan core pentium m's are fixed to frequencys listed by ACPI. Patching the speedstep-centrino.c and turning off CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI mostly resulted in a non-working cpufreq module. The attached speedstep-centrino.c incorperates the sysfs-patch from http://avkrok.net to dynamically change the Vcore and I added the 08 stepping revision which was neccesary to run cpufreq on my platform. The file also enables frequencys below 600 MHz for the Pentium M 725 (see lines beginning from 265). Works pretty nice, but enhances the battery life only a little bit (+20 Minutes on my first run fixed to 100Mhz). Kind regards from Germany, Sascha Klo=DF -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFD3n6rSaINjT6N32YRAofHAJ40xsgFnx71Oo9AjxoltIoSqadSogCfcXE8 4cVDWKtfPnT4Y589dffq6tE=3D =3D7Guv -----END PGP SIGNATURE----- --------------020304060108040801020406 Content-Type: text/plain; name="speedstep-centrino.c" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="speedstep-centrino.c" /* * cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium * M (part of the Centrino chipset). * * Despite the "SpeedStep" in the name, this is almost entirely unlike * traditional SpeedStep. * * Modelled on speedstep.c * * Copyright (C) 2003 Jeremy Fitzhardinge * * WARNING WARNING WARNING * * This driver manipulates the PERF_CTL MSR, which is only somewhat * documented. While it seems to work on my laptop, it has not been * tested anywhere else, and it may not work for you, do strange * things or simply crash. */ #include #include #include #include #include #include #include #include #ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI #include #include #endif #include #include #include #include "speedstep-est-common.h" #define PFX "speedstep-centrino: " #define MAINTAINER "Jeremy Fitzhardinge " #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg) struct cpu_id { __u8 x86; /* CPU family */ __u8 x86_model; /* model */ __u8 x86_mask; /* stepping */ }; enum { CPU_BANIAS, CPU_DOTHAN_A1, CPU_DOTHAN_A2, CPU_DOTHAN_B0, CPU_DOTHAN_C0, CPU_DOTHAN_08, }; static const struct cpu_id cpu_ids[] = { [CPU_BANIAS] = { 6, 9, 5 }, [CPU_DOTHAN_A1] = { 6, 13, 1 }, [CPU_DOTHAN_A2] = { 6, 13, 2 }, [CPU_DOTHAN_B0] = { 6, 13, 6 }, [CPU_DOTHAN_C0] = { 6, 13, 8 }, [CPU_DOTHAN_08] = { 6, 13, 8 }, }; #define N_IDS (sizeof(cpu_ids)/sizeof(cpu_ids[0])) struct cpu_model { const struct cpu_id *cpu_id; const char *model_name; unsigned max_freq; /* max clock in kHz */ struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */ }; static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x); /* Operating points for current CPU */ static struct cpu_model *centrino_model[NR_CPUS]; static const struct cpu_id *centrino_cpu[NR_CPUS]; static struct cpufreq_driver centrino_driver; #ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE #define VOLTAGE_TO_VID(mv) (((mv) - 700) / 16) #define VID_TO_VOLTAGE(vid) ((vid) * 16 + 700) /* Computes the correct form for IA32_PERF_CTL MSR for a particular frequency/voltage operating point; frequency in MHz, volts in mV. This is stored as "index" in the structure. */ #define OP(mhz, mv) \ { \ .frequency = (mhz) * 1000, \ .index = (((mhz)/100) << 8) | VOLTAGE_TO_VID(mv) \ } /* * These voltage tables were derived from the Intel Pentium M * datasheet, document 25261202.pdf, Table 5. I have verified they * are consistent with my IBM ThinkPad X31, which has a 1.3GHz Pentium * M. */ /* Ultra Low Voltage Intel Pentium M processor 900MHz (Banias) */ static struct cpufreq_frequency_table banias_900[] = { OP(600, 844), OP(800, 988), OP(900, 1004), { .frequency = CPUFREQ_TABLE_END } }; /* Ultra Low Voltage Intel Pentium M processor 1000MHz (Banias) */ static struct cpufreq_frequency_table banias_1000[] = { OP(600, 844), OP(800, 972), OP(900, 988), OP(1000, 1004), { .frequency = CPUFREQ_TABLE_END } }; /* Low Voltage Intel Pentium M processor 1.10GHz (Banias) */ static struct cpufreq_frequency_table banias_1100[] = { OP( 600, 956), OP( 800, 1020), OP( 900, 1100), OP(1000, 1164), OP(1100, 1180), { .frequency = CPUFREQ_TABLE_END } }; /* Low Voltage Intel Pentium M processor 1.20GHz (Banias) */ static struct cpufreq_frequency_table banias_1200[] = { OP( 600, 956), OP( 800, 1004), OP( 900, 1020), OP(1000, 1100), OP(1100, 1164), OP(1200, 1180), { .frequency = CPUFREQ_TABLE_END } }; /* Intel Pentium M processor 1.30GHz (Banias) */ static struct cpufreq_frequency_table banias_1300[] = { OP( 600, 956), OP( 800, 1260), OP(1000, 1292), OP(1200, 1356), OP(1300, 1388), { .frequency = CPUFREQ_TABLE_END } }; /* Intel Pentium M processor 1.40GHz (Banias) */ static struct cpufreq_frequency_table banias_1400[] = { OP( 600, 956), OP( 800, 1180), OP(1000, 1308), OP(1200, 1436), OP(1400, 1484), { .frequency = CPUFREQ_TABLE_END } }; /* Intel Pentium M processor 1.50GHz (Banias) */ static struct cpufreq_frequency_table banias_1500[] = { OP( 600, 956), OP( 800, 1116), OP(1000, 1228), OP(1200, 1356), OP(1400, 1452), OP(1500, 1484), { .frequency = CPUFREQ_TABLE_END } }; /* Intel Pentium M processor 1.60GHz (Banias) */ static struct cpufreq_frequency_table banias_1600[] = { OP( 600, 956), OP( 800, 1036), OP(1000, 1164), OP(1200, 1276), OP(1400, 1420), OP(1600, 1484), { .frequency = CPUFREQ_TABLE_END } }; /* Intel Pentium M processor 1.70GHz (Banias) */ static struct cpufreq_frequency_table banias_1700[] = { OP( 600, 956), OP( 800, 1004), OP(1000, 1116), OP(1200, 1228), OP(1400, 1308), OP(1700, 1484), { .frequency = CPUFREQ_TABLE_END } }; #undef OP /* Dothan processor datasheet 30218903.pdf defines 4 voltages for each frequency (VID#A through VID#D) - this macro allows us to define all of these but we only use the VID#C voltages at compile time - this may need some work if we want to select the voltage profile at runtime. */ #define OP(mhz, mva, mvb, mvc, mvd) \ { \ .frequency = (mhz) * 1000, \ .index = (((mhz)/100) << 8) | ((mvc - 700) / 16) \ } /* Intel Pentium M processor 710 / 1.40GHz (Dothan) */ static struct cpufreq_frequency_table dothan_1400[] = { OP( 600, 700, 700, 700, 700), OP( 800, 770, 770, 770, 770), OP(1000, 840, 840, 840, 840), OP(1200, 910, 910, 910, 910), OP(1400, 980, 980, 980, 980), { .frequency = CPUFREQ_TABLE_END } }; /* Intel Pentium M processor 715 / 1.50GHz (Dothan) */ static struct cpufreq_frequency_table dothan_1500[] = { OP( 600, 988, 988, 988, 988), OP( 800, 1068, 1068, 1068, 1052), OP(1000, 1148, 1148, 1132, 1116), OP(1200, 1228, 1212, 1212, 1180), OP(1500, 1340, 1324, 1308, 1276), { .frequency = CPUFREQ_TABLE_END } }; /* Intel Pentium M processor 725 / 1.60GHz (Dothan) */ static struct cpufreq_frequency_table dothan_1600[] = { OP( 100, 700, 700, 700, 700), OP( 200, 700, 700, 700, 700), OP( 266, 700, 700, 700, 700), OP( 333, 700, 700, 700, 700), OP( 400, 700, 700, 700, 700), OP( 533, 700, 700, 700, 700), OP( 600, 700, 700, 700, 700), OP( 800, 1000, 1000, 950, 950), OP(1000, 1100, 1100, 1050, 1050), OP(1200, 1212, 1196, 1180, 1164), OP(1400, 1276, 1260, 1244, 1228), OP(1600, 1340, 1324, 1308, 1276), { .frequency = CPUFREQ_TABLE_END } }; /* Funktionierende FreqTable... static struct cpufreq_frequency_table dothan_1600[] = { OP( 100, 706, 706, 706, 706), OP( 200, 706, 706, 706, 706), OP( 266, 706, 706, 706, 706), OP( 333, 706, 706, 706, 706), OP( 400, 706, 706, 706, 706), OP( 533, 706, 706, 706, 706), OP( 600, 706, 706, 706, 706), OP( 800, 1068, 1068, 1052, 1052), OP(1000, 1132, 1132, 1116, 1116), OP(1200, 1212, 1196, 1180, 1164), OP(1400, 1276, 1260, 1244, 1228), OP(1600, 1340, 1324, 1308, 1276), { .frequency = CPUFREQ_TABLE_END } }; */ /* Intel Pentium M processor 735 / 1.70GHz (Dothan) */ static struct cpufreq_frequency_table dothan_1700[] = { OP( 600, 988, 988, 988, 988), OP( 800, 1052, 1052, 1052, 1052), OP(1000, 1116, 1116, 1116, 1100), OP(1200, 1180, 1180, 1164, 1148), OP(1400, 1244, 1244, 1228, 1212), OP(1700, 1340, 1324, 1308, 1276), { .frequency = CPUFREQ_TABLE_END } }; /* Intel Pentium M processor 745 / 1.80GHz (Dothan) */ static struct cpufreq_frequency_table dothan_1800[] = { OP( 600, 988, 988, 988, 988), OP( 800, 1052, 1052, 1052, 1036), OP(1000, 1116, 1100, 1100, 1084), OP(1200, 1164, 1164, 1148, 1132), OP(1400, 1228, 1212, 1212, 1180), OP(1600, 1292, 1276, 1260, 1228), OP(1800, 1340, 1324, 1308, 1276), { .frequency = CPUFREQ_TABLE_END } }; /* Intel Pentium M processor 755 / 2.00GHz (Dothan) */ static struct cpufreq_frequency_table dothan_2000[] = { OP( 600, 988, 988, 988, 988), OP( 800, 1052, 1036, 1036, 1036), OP(1000, 1100, 1084, 1084, 1084), OP(1200, 1148, 1132, 1132, 1116), OP(1400, 1196, 1180, 1180, 1164), OP(1600, 1244, 1228, 1228, 1196), OP(1800, 1292, 1276, 1276, 1244), OP(2000, 1340, 1324, 1308, 1276), { .frequency = CPUFREQ_TABLE_END } }; /* Intel Pentium M processor 750 / 1.86GHz (Dothan) */ static struct cpufreq_frequency_table dothan_1867[] = { OP( 800, 880, 880, 880, 880), OP(1333, 1010, 1010, 1010, 1010), OP(1867, 1120, 1120, 1120, 1120), { .frequency = CPUFREQ_TABLE_END } }; #undef OP #define _BANIAS(cpuid, max, name) \ { .cpu_id = cpuid, \ .model_name = "Intel(R) Pentium(R) M processor " name "MHz", \ .max_freq = (max)*1000, \ .op_points = banias_##max, \ } #define BANIAS(max) _BANIAS(&cpu_ids[CPU_BANIAS], max, #max) #define DOTHAN(cpuid, max, name) \ { .cpu_id = cpuid, \ .model_name = "Intel(R) Pentium(R) M processor " name "GHz", \ .max_freq = (max)*1000, \ .op_points = dothan_##max, \ } /* CPU models, their operating frequency range, and freq/voltage operating points */ static struct cpu_model models[] = { _BANIAS(&cpu_ids[CPU_BANIAS], 900, " 900"), BANIAS(1000), BANIAS(1100), BANIAS(1200), BANIAS(1300), BANIAS(1400), BANIAS(1500), BANIAS(1600), BANIAS(1700), DOTHAN(&cpu_ids[CPU_DOTHAN_B0], 1400, "1.40"), DOTHAN(&cpu_ids[CPU_DOTHAN_B0], 1500, "1.50"), DOTHAN(&cpu_ids[CPU_DOTHAN_B0], 1600, "1.60"), DOTHAN(&cpu_ids[CPU_DOTHAN_B0], 1700, "1.70"), DOTHAN(&cpu_ids[CPU_DOTHAN_B0], 1800, "1.80"), DOTHAN(&cpu_ids[CPU_DOTHAN_B0], 2000, "2.00"), DOTHAN(&cpu_ids[CPU_DOTHAN_C0], 1867, "1.86"), DOTHAN(&cpu_ids[CPU_DOTHAN_08], 1600, "1.60"), /* NULL model_name is a wildcard */ { &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL }, { &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL }, { &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL }, { &cpu_ids[CPU_DOTHAN_C0], NULL, 0, NULL }, { &cpu_ids[CPU_DOTHAN_08], NULL, 0, NULL }, { NULL, } }; #undef _BANIAS #undef BANIAS #undef DOTHAN static int centrino_cpu_init_table(struct cpufreq_policy *policy) { struct cpuinfo_x86 *cpu = &cpu_data[policy->cpu]; struct cpu_model *model; for(model = models; model->cpu_id != NULL; model++) if (centrino_verify_cpu_id(cpu, model->cpu_id) && (model->model_name == NULL || strcmp(cpu->x86_model_id, model->model_name) == 0)) break; if (model->cpu_id == NULL) { /* No match at all */ dprintk(KERN_INFO PFX "no support for CPU model \"%s\": " "send /proc/cpuinfo to " MAINTAINER "\n", cpu->x86_model_id); return -ENOENT; } if (model->op_points == NULL) { /* Matched a non-match */ dprintk(KERN_INFO PFX "no table support for CPU model \"%s\": \n", cpu->x86_model_id); #ifndef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI dprintk(KERN_INFO PFX "try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled\n"); #endif return -ENOENT; } centrino_model[policy->cpu] = model; dprintk("found \"%s\": max frequency: %dkHz\n", model->model_name, model->max_freq); return 0; } #else static inline int centrino_cpu_init_table(struct cpufreq_policy *policy) { return -ENODEV; } #endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */ static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x) { if ((c->x86 == x->x86) && (c->x86_model == x->x86_model) && (c->x86_mask == x->x86_mask)) return 1; return 0; } /* To be called only after centrino_model is initialized */ static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe) { int i; /* * Extract clock in kHz from PERF_CTL value * for centrino, as some DSDTs are buggy. * Ideally, this can be done using the acpi_data structure. */ if ((centrino_cpu[cpu] == &cpu_ids[CPU_BANIAS]) || (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_A1]) || (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_B0]) || (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_C0]) || (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_08] )) { msr = (msr >> 8) & 0xff; return msr * 100000; } if ((!centrino_model[cpu]) || (!centrino_model[cpu]->op_points)) return 0; msr &= 0xffff; for (i=0;centrino_model[cpu]->op_points[i].frequency != CPUFREQ_TABLE_END; i++) { if (msr == centrino_model[cpu]->op_points[i].index) return centrino_model[cpu]->op_points[i].frequency; } if (failsafe) return centrino_model[cpu]->op_points[i-1].frequency; else return 0; } /* Return the current CPU frequency in kHz */ static unsigned int get_cur_freq(unsigned int cpu) { unsigned l, h; unsigned clock_freq; cpumask_t saved_mask; saved_mask = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(cpu)); if (smp_processor_id() != cpu) return 0; rdmsr(MSR_IA32_PERF_STATUS, l, h); clock_freq = extract_clock(l, cpu, 0); if (unlikely(clock_freq == 0)) { /* * On some CPUs, we can see transient MSR values (which are * not present in _PSS), while CPU is doing some automatic * P-state transition (like TM2). Get the last freq set * in PERF_CTL. */ rdmsr(MSR_IA32_PERF_CTL, l, h); clock_freq = extract_clock(l, cpu, 1); } set_cpus_allowed(current, saved_mask); return clock_freq; } #ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI static struct acpi_processor_performance p; /* * centrino_cpu_init_acpi - register with ACPI P-States library * * Register with the ACPI P-States library (part of drivers/acpi/processor.c) * in order to determine correct frequency and voltage pairings by reading * the _PSS of the ACPI DSDT or SSDT tables. */ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) { union acpi_object arg0 = {ACPI_TYPE_BUFFER}; u32 arg0_buf[3]; struct acpi_object_list arg_list = {1, &arg0}; unsigned long cur_freq; int result = 0, i; unsigned int cpu = policy->cpu; /* _PDC settings */ arg0.buffer.length = 12; arg0.buffer.pointer = (u8 *) arg0_buf; arg0_buf[0] = ACPI_PDC_REVISION_ID; arg0_buf[1] = 1; arg0_buf[2] = ACPI_PDC_EST_CAPABILITY_SMP | ACPI_PDC_EST_CAPABILITY_MSR; p.pdc = &arg_list; /* register with ACPI core */ if (acpi_processor_register_performance(&p, cpu)) { dprintk(KERN_INFO PFX "obtaining ACPI data failed\n"); return -EIO; } /* verify the acpi_data */ if (p.state_count <= 1) { dprintk("No P-States\n"); result = -ENODEV; goto err_unreg; } if ((p.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) || (p.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) { dprintk("Invalid control/status registers (%x - %x)\n", p.control_register.space_id, p.status_register.space_id); result = -EIO; goto err_unreg; } for (i=0; i p.states[0].core_frequency) { dprintk("P%u has larger frequency (%u) than P0 (%u), skipping\n", i, p.states[i].core_frequency, p.states[0].core_frequency); p.states[i].core_frequency = 0; continue; } } /* centrino_model[cpu]->op_points[1].index = 0x040D; centrino_model[cpu]->op_points[1].frequency = 400000; p.states[1].core_frequency = 400; */ centrino_model[cpu] = kmalloc(sizeof(struct cpu_model), GFP_KERNEL); if (!centrino_model[cpu]) { result = -ENOMEM; goto err_unreg; } memset(centrino_model[cpu], 0, sizeof(struct cpu_model)); centrino_model[cpu]->model_name=NULL; centrino_model[cpu]->max_freq = p.states[0].core_frequency * 1000; centrino_model[cpu]->op_points = kmalloc(sizeof(struct cpufreq_frequency_table) * (p.state_count + 1), GFP_KERNEL); if (!centrino_model[cpu]->op_points) { result = -ENOMEM; goto err_kfree; } for (i=0; iop_points[i].index = p.states[i].control; centrino_model[cpu]->op_points[i].frequency = p.states[i].core_frequency * 1000; dprintk("adding state %i with frequency %u and control value %04x\n", i, centrino_model[cpu]->op_points[i].frequency, centrino_model[cpu]->op_points[i].index); } centrino_model[cpu]->op_points[p.state_count].frequency = CPUFREQ_TABLE_END; cur_freq = get_cur_freq(cpu); for (i=0; iop_points[i].frequency = CPUFREQ_ENTRY_INVALID; continue; } if (extract_clock(centrino_model[cpu]->op_points[i].index, cpu, 0) != (centrino_model[cpu]->op_points[i].frequency)) { dprintk("Invalid encoded frequency (%u vs. %u)\n", extract_clock(centrino_model[cpu]->op_points[i].index, cpu, 0), centrino_model[cpu]->op_points[i].frequency); result = -EINVAL; goto err_kfree_all; } if (cur_freq == centrino_model[cpu]->op_points[i].frequency) p.state = i; } /* notify BIOS that we exist */ acpi_processor_notify_smm(THIS_MODULE); return 0; err_kfree_all: kfree(centrino_model[cpu]->op_points); err_kfree: kfree(centrino_model[cpu]); err_unreg: acpi_processor_unregister_performance(&p, cpu); dprintk(KERN_INFO PFX "invalid ACPI data\n"); return (result); } #else static inline int centrino_cpu_init_acpi(struct cpufreq_policy *policy) { return -ENODEV; } #endif static int centrino_cpu_init(struct cpufreq_policy *policy) { struct cpuinfo_x86 *cpu = &cpu_data[policy->cpu]; unsigned freq; unsigned l, h; int ret; int i; /* Only Intel makes Enhanced Speedstep-capable CPUs */ if (cpu->x86_vendor != X86_VENDOR_INTEL || !cpu_has(cpu, X86_FEATURE_EST)) return -ENODEV; for (i = 0; i < N_IDS; i++) if (centrino_verify_cpu_id(cpu, &cpu_ids[i])) break; if (i != N_IDS) centrino_cpu[policy->cpu] = &cpu_ids[i]; if (is_const_loops_cpu(policy->cpu)) { centrino_driver.flags |= CPUFREQ_CONST_LOOPS; } if (centrino_cpu_init_acpi(policy)) { if (policy->cpu != 0) return -ENODEV; if (!centrino_cpu[policy->cpu]) { dprintk(KERN_INFO PFX "found unsupported CPU with " "Enhanced SpeedStep: send /proc/cpuinfo to " MAINTAINER "\n"); return -ENODEV; } if (centrino_cpu_init_table(policy)) { return -ENODEV; } } /* Check to see if Enhanced SpeedStep is enabled, and try to enable it if not. */ rdmsr(MSR_IA32_MISC_ENABLE, l, h); if (!(l & (1<<16))) { l |= (1<<16); dprintk("trying to enable Enhanced SpeedStep (%x)\n", l); wrmsr(MSR_IA32_MISC_ENABLE, l, h); /* check to see if it stuck */ rdmsr(MSR_IA32_MISC_ENABLE, l, h); if (!(l & (1<<16))) { printk(KERN_INFO PFX "couldn't enable Enhanced SpeedStep\n"); return -ENODEV; } } freq = get_cur_freq(policy->cpu); policy->governor = CPUFREQ_DEFAULT_GOVERNOR; policy->cpuinfo.transition_latency = 10000; /* 10uS transition latency */ policy->cur = freq; dprintk("centrino_cpu_init: cur=%dkHz\n", policy->cur); ret = cpufreq_frequency_table_cpuinfo(policy, centrino_model[policy->cpu]->op_points); if (ret) return (ret); cpufreq_frequency_table_get_attr(centrino_model[policy->cpu]->op_points, policy->cpu); return 0; } static int centrino_cpu_exit(struct cpufreq_policy *policy) { unsigned int cpu = policy->cpu; if (!centrino_model[cpu]) return -ENODEV; cpufreq_frequency_table_put_attr(cpu); #ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI if (!centrino_model[cpu]->model_name) { dprintk("unregistering and freeing ACPI data\n"); acpi_processor_unregister_performance(&p, cpu); kfree(centrino_model[cpu]->op_points); kfree(centrino_model[cpu]); } #endif centrino_model[cpu] = NULL; return 0; } /** * centrino_verify - verifies a new CPUFreq policy * @policy: new policy * * Limit must be within this model's frequency range at least one * border included. */ static int centrino_verify (struct cpufreq_policy *policy) { return cpufreq_frequency_table_verify(policy, centrino_model[policy->cpu]->op_points); } /** * centrino_setpolicy - set a new CPUFreq policy * @policy: new policy * @target_freq: the target frequency * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) * * Sets a new CPUFreq policy. */ static int centrino_target (struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { unsigned int newstate = 0; unsigned int msr, oldmsr, h, cpu = policy->cpu; struct cpufreq_freqs freqs; cpumask_t saved_mask; int retval; if (centrino_model[cpu] == NULL) return -ENODEV; /* * Support for SMP systems. * Make sure we are running on the CPU that wants to change frequency */ saved_mask = current->cpus_allowed; set_cpus_allowed(current, policy->cpus); if (!cpu_isset(smp_processor_id(), policy->cpus)) { dprintk("couldn't limit to CPUs in this domain\n"); return(-EAGAIN); } if (cpufreq_frequency_table_target(policy, centrino_model[cpu]->op_points, target_freq, relation, &newstate)) { retval = -EINVAL; goto migrate_end; } msr = centrino_model[cpu]->op_points[newstate].index; rdmsr(MSR_IA32_PERF_CTL, oldmsr, h); if (msr == (oldmsr & 0xffff)) { retval = 0; dprintk("no change needed - msr was and needs to be %x\n", oldmsr); goto migrate_end; } freqs.cpu = cpu; freqs.old = extract_clock(oldmsr, cpu, 0); freqs.new = extract_clock(msr, cpu, 0); dprintk("target=%dkHz old=%d new=%d msr=%04x\n", target_freq, freqs.old, freqs.new, msr); cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); /* all but 16 LSB are "reserved", so treat them with care */ oldmsr &= ~0xffff; msr &= 0xffff; oldmsr |= msr; wrmsr(MSR_IA32_PERF_CTL, oldmsr, h); cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); retval = 0; migrate_end: set_cpus_allowed(current, saved_mask); return (retval); } /* sysfs things for altering voltages */ static ssize_t show_scaling_voltages(struct cpufreq_policy *policy, char *buf) { unsigned int cpu; int i, j; if (!policy) return -ENODEV; cpu = policy->cpu; if (!centrino_model[cpu] || !centrino_model[cpu]->op_points) return -ENODEV; j=snprintf(buf, PAGE_SIZE, "# frequency voltage\n"); for (i=0; centrino_model[cpu]->op_points[i].frequency != CPUFREQ_TABLE_END; i++) { /* Print lines of frequency and voltage */ j += snprintf(&buf[j], PAGE_SIZE-j, "%u %u\n", centrino_model[cpu]->op_points[i].frequency, VID_TO_VOLTAGE(centrino_model[cpu]->op_points[i].index & 0xff)); } buf[PAGE_SIZE-1] = 0; return j; } static ssize_t store_scaling_voltages(struct cpufreq_policy *policy, const char *buf, size_t count) { unsigned int cpu; unsigned int frequency, voltage; int ret, i, j; int msr, vid; unsigned int cur_freq; static struct cpufreq_frequency_table **original_table = NULL; if (!policy) return -ENODEV; cpu = policy->cpu; if (!centrino_model[cpu] || !centrino_model[cpu]->op_points) return -ENODEV; /* Remember the original voltages, and don't let the user * raise the voltages above those. As stated in * centrino_init(), be paranoid about releasing people's * valuable magic smoke. */ if (!original_table) { original_table = kmalloc(sizeof(struct cpufreq_frequency_table *)*NR_CPUS, GFP_KERNEL); for (i=0; i < NR_CPUS; i++) original_table[i] = NULL; } if (!original_table[cpu]) { /* Count number of frequencies and allocate memory for a copy */ for (i=0; centrino_model[cpu]->op_points[i].frequency != CPUFREQ_TABLE_END; i++); original_table[cpu] = (struct cpufreq_frequency_table*) kmalloc(sizeof(struct cpufreq_frequency_table)*(i+1), GFP_KERNEL); /* Make copy of frequency/voltage pairs */ for (i=0; centrino_model[cpu]->op_points[i].frequency != CPUFREQ_TABLE_END; i++) { original_table[cpu][i].frequency = centrino_model[cpu]->op_points[i].frequency; original_table[cpu][i].index = centrino_model[cpu]->op_points[i].index; } original_table[cpu][i].frequency = CPUFREQ_TABLE_END; } /* Don't use sscanf, since we want to return the actual number * of characters read. I don't feel comfortable using * simple_stroul either, since I'm not sure that the buf * really is zero-terminated. */ /* Eat non-digits */ for (ret = 0; ret < count && !isdigit(buf[ret]); ret++); if (ret == count) return ret; /* Read frequency */ for (frequency = 0; ret < count && isdigit(buf[ret]); ret++) frequency = 10*frequency + buf[ret] - '0'; /* Eat non-digits */ for (; ret < count && !isdigit(buf[ret]); ret++); /* Read new voltage */ for (voltage = 0; ret < count && isdigit(buf[ret]); ret++) voltage = 10*voltage + buf[ret] - '0'; if (frequency == 0 || voltage < 700) return -EINVAL; /* Check so that the voltage is not higher than the original one */ for (j=0; original_table[cpu][j].frequency != CPUFREQ_TABLE_END; j++) if (frequency == original_table[cpu][j].frequency) break; if (original_table[cpu][j].frequency == CPUFREQ_TABLE_END) return -EINVAL; if (voltage > VID_TO_VOLTAGE(original_table[cpu][j].index & 0xff)) return -EINVAL; for (i=0; centrino_model[cpu]->op_points[i].frequency != CPUFREQ_TABLE_END; i++) { if (frequency == centrino_model[cpu]->op_points[i].frequency) break; } if (centrino_model[cpu]->op_points[i].frequency == CPUFREQ_TABLE_END) return -EINVAL; msr = centrino_model[cpu]->op_points[i].index; vid = VOLTAGE_TO_VID(voltage); msr = (msr & ~0xff) | (vid & 0xff); /* Double check so that the voltage id is not higher than the original one */ if (vid > (original_table[cpu][j].index & 0xff)) return -EINVAL; dprintk(KERN_INFO PFX "altering centrino cpufreq table, to make %u kHz have " "voltage %u mV (VID=%u)\n", frequency, voltage, vid); centrino_model[cpu]->op_points[i].index = msr; /* If the updated voltage applies to the frequency currently * used, tell the CPU about the new voltage */ cur_freq = cpufreq_get(policy->cpu); if (cur_freq == frequency) centrino_target(policy, cur_freq, CPUFREQ_RELATION_L); return ret; } #define define_one_rw(_name) \ static struct freq_attr _name = \ __ATTR(_name, 0644, show_##_name, store_##_name) define_one_rw(scaling_voltages); /* end of sysfs voltage things */ static struct freq_attr* centrino_attr[] = { &scaling_voltages, &cpufreq_freq_attr_scaling_available_freqs, NULL, }; static struct cpufreq_driver centrino_driver = { .name = "centrino", /* should be speedstep-centrino, but there's a 16 char limit */ .init = centrino_cpu_init, .exit = centrino_cpu_exit, .verify = centrino_verify, .target = centrino_target, .get = get_cur_freq, .attr = centrino_attr, .owner = THIS_MODULE, }; /** * centrino_init - initializes the Enhanced SpeedStep CPUFreq driver * * Initializes the Enhanced SpeedStep support. Returns -ENODEV on * unsupported devices, -ENOENT if there's no voltage table for this * particular CPU model, -EINVAL on problems during initiatization, * and zero on success. * * This is quite picky. Not only does the CPU have to advertise the * "est" flag in the cpuid capability flags, we look for a specific * CPU model and stepping, and we need to have the exact model name in * our voltage tables. That is, be paranoid about not releasing * someone's valuable magic smoke. */ static int __init centrino_init(void) { struct cpuinfo_x86 *cpu = cpu_data; if (!cpu_has(cpu, X86_FEATURE_EST)) return -ENODEV; return cpufreq_register_driver(¢rino_driver); } static void __exit centrino_exit(void) { cpufreq_unregister_driver(¢rino_driver); } MODULE_AUTHOR ("Jeremy Fitzhardinge "); MODULE_DESCRIPTION ("Enhanced SpeedStep driver for Intel Pentium M processors."); MODULE_LICENSE ("GPL"); late_initcall(centrino_init); module_exit(centrino_exit); --------------020304060108040801020406 Content-Type: text/x-vcard; charset=utf-8; name="sascha.kloss.vcf" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="sascha.kloss.vcf" begin:vcard fn;quoted-printable:Sascha Klo=C3=9F n;quoted-printable:Klo=C3=9F;Sascha email;internet:sascha.kloss@gmx.de tel;cell:0174 4311303 x-mozilla-html:FALSE version:2.1 end:vcard --------------020304060108040801020406 Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Cpufreq mailing list Cpufreq@lists.linux.org.uk http://lists.linux.org.uk/mailman/listinfo/cpufreq --------------020304060108040801020406--