From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <43E1BD0E.3080602@domain.hid> Date: Thu, 02 Feb 2006 09:04:30 +0100 From: Philippe Gerum MIME-Version: 1.0 Subject: Re: [Xenomai-help] Dual Xeon 2.6.13 SMP config problem References: <23fcc723d285.23d28523fcc7@domain.hid> In-Reply-To: <23fcc723d285.23d28523fcc7@domain.hid> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Nathaniel J Villaume Cc: xenomai@xenomai.org Nathaniel J Villaume wrote: > Hi, > It turns out that I had to upgrade the mkinitrd package. The one that comes with FC3 doesn't build the image correctly for SMP. That said, I now can build and boot a vanilla 2.6.15 kernel, but when I try to boot the ipipe-patched kernel, I get the following error near the end of the boot-sequence: ( I thought it was an X-server problem it comes so late, but then I booted to init level 3, and I get the same thing) > > hda: dma_timer_expiry dma_status == 0x24 > hda: dma: int recovery > hda: lost interrupt > > Then the kernel hangs. (Num Lock key doesn't make the lights blink.) > > The configs have two differences: (seriously) > 1) The dates are different, > 2) ipipe is included in the failing kernel. > > I would like to know if there are any other tests I can do to isolate the cause of this failure. > > I appreciate any comments, > Please send me the .config privately. > Nate > > > > _______________________________________________ > Xenomai-help mailing list > Xenomai-help@domain.hid > https://mail.gna.org/listinfo/xenomai-help > -- Philippe.