* fc transport recursion depth exceeded
@ 2006-02-06 21:13 Michael Reed
0 siblings, 0 replies; only message in thread
From: Michael Reed @ 2006-02-06 21:13 UTC (permalink / raw)
To: James.Smart; +Cc: linux-scsi, Andrew Vasquez
Hi James,
I was testing with the qlogic board this afternoon and observed these
messages in the dmesg output. They were generated in response to a
switchdisable ; sleep 5 ; switchenable command sequence on my switch.
end_request: I/O error, dev sdbz, sector 1282218
sd 4:0:34:0: SCSI error: return code = 0x10000
run_workqueue: recursion depth exceeded: 4
Call Trace:
end_request: I/O error, dev sdbz, sector 1282250
[<a000000100012ae0>] show_stack+0x40/0xa0
sp=e0000034f6a8f9e0 bsp=e0000034f6a894c0
sd 4:0:34:0: SCSI error: return code = 0x10000
end_request: I/O error, dev sdbz, sector 1282282
[<a000000100012b70>] dump_stack+0x30/0x60
sp=e0000034f6a8fbb0 bsp=e0000034f6a894a8
[<a0000001000c8f10>] run_workqueue+0x90/0x280
sp=e0000034f6a8fbb0 bsp=e0000034f6a89468
[<a0000001000c9150>] flush_cpu_workqueue+0x50/0x1e0
sp=e0000034f6a8fbb0 bsp=e0000034f6a89438
[<a0000001000c9350>] flush_workqueue+0x70/0x160
sp=e0000034f6a8fc10 bsp=e0000034f6a89410
[<a00000010052b130>] scsi_flush_work+0x90/0xc0
sp=e0000034f6a8fc10 bsp=e0000034f6a893e8
[<a000000100547480>] fc_rport_tgt_remove+0x100/0x140
sp=e0000034f6a8fc10 bsp=e0000034f6a893b8
[<a0000001005475b0>] fc_shost_remove_rports+0xf0/0x1c0
sp=e0000034f6a8fc10 bsp=e0000034f6a89388
[<a0000001000c9040>] run_workqueue+0x1c0/0x280
sp=e0000034f6a8fc10 bsp=e0000034f6a89348
[<a0000001000c9150>] flush_cpu_workqueue+0x50/0x1e0
sp=e0000034f6a8fc10 bsp=e0000034f6a89318
[<a0000001000c9350>] flush_workqueue+0x70/0x160
sp=e0000034f6a8fc70 bsp=e0000034f6a892f0
[<a00000010052b130>] scsi_flush_work+0x90/0xc0
sp=e0000034f6a8fc70 bsp=e0000034f6a892d0
[<a000000100547480>] fc_rport_tgt_remove+0x100/0x140
sp=e0000034f6a8fc70 bsp=e0000034f6a892a0
[<a0000001005475b0>] fc_shost_remove_rports+0xf0/0x1c0
sp=e0000034f6a8fc70 bsp=e0000034f6a89270
[<a0000001000c9040>] run_workqueue+0x1c0/0x280
sp=e0000034f6a8fc70 bsp=e0000034f6a89230
[<a0000001000c9150>] flush_cpu_workqueue+0x50/0x1e0
sp=e0000034f6a8fc70 bsp=e0000034f6a89200
[<a0000001000c9350>] flush_workqueue+0x70/0x160
sp=e0000034f6a8fcd0 bsp=e0000034f6a891d0
[<a00000010052b130>] scsi_flush_work+0x90/0xc0
sp=e0000034f6a8fcd0 bsp=e0000034f6a891b0
[<a000000100547480>] fc_rport_tgt_remove+0x100/0x140
sp=e0000034f6a8fcd0 bsp=e0000034f6a89180
[<a0000001005475b0>] fc_shost_remove_rports+0xf0/0x1c0
sp=e0000034f6a8fcd0 bsp=e0000034f6a89150
[<a0000001000c9040>] run_workqueue+0x1c0/0x280
sp=e0000034f6a8fcd0 bsp=e0000034f6a89110
[<a0000001000ca130>] worker_thread+0x1d0/0x260
sp=e0000034f6a8fcd0 bsp=e0000034f6a890e0
[<a0000001000d1f00>] kthread+0x220/0x2a0
sp=e0000034f6a8fd50 bsp=e0000034f6a89098
[<a000000100011070>] kernel_thread_helper+0xd0/0x100
sp=e0000034f6a8fe30 bsp=e0000034f6a89070
[<a000000100009120>] start_kernel_thread+0x20/0x40
sp=e0000034f6a8fe30 bsp=e0000034f6a89070
sd 3:0:35:0: SCSI error: return code = 0x10000
end_request: I/O error, dev sdcr, sector 1745339
sd 6:0:33:0: SCSI error: return code = 0x10000
end_request: I/O error, dev sdek, sector 2880792
This happened a number of times during the single test event.
Mike
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-02-06 21:13 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-02-06 21:13 fc transport recursion depth exceeded Michael Reed
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.