[PATCH 19/22] lpfc 8.1.2 : Fixed module parameter descriptions

[James Smart <James.Smart@Emulex.Com>]

Fixed module parameter descriptions.


Signed-off-by: James Smart <James.Smart@emulex.com>

--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -664,10 +664,10 @@ LPFC_ATTR_R(ack0, 0, 0, 1, "Enable ACK0
  # is 0. Default value of cr_count is 1. The cr_count feature is disabled if
  # cr_delay is set to 0.
  */
-LPFC_ATTR_RW(cr_delay, 0, 0, 63, "A count of milliseconds after which an"
+LPFC_ATTR_RW(cr_delay, 0, 0, 63, "A count of milliseconds after which an "
  		"interrupt response is generated");

-LPFC_ATTR_RW(cr_count, 1, 1, 255, "A count of I/O completions after which an"
+LPFC_ATTR_RW(cr_count, 1, 1, 255, "A count of I/O completions after which an "
  		"interrupt response is generated");

  /*
@@ -683,7 +683,7 @@ LPFC_ATTR_RW(fdmi_on, 0, 0, 2, "Enable F
  # Specifies the maximum number of ELS cmds we can have outstanding (for
  # discovery). Value range is [1,64]. Default value = 32.
  */
-LPFC_ATTR(discovery_threads, 32, 1, 64, "Maximum number of ELS commands"
+LPFC_ATTR(discovery_threads, 32, 1, 64, "Maximum number of ELS commands "
  		 "during discovery");

  /*