Bootdata ok (command line is root=/dev/md0 nousb) Linux version 2.6.9-2.ast-smp (root@firelog.b.astralnet.ro) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 SMP Sat Dec 18 13:31:32 EET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000040000000 (usable) BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) No mptable found. On node 0 totalpages: 262144 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 258048 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 ACPI: Unable to locate RSDP Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: TYAN <6>Product ID: S2880 <6>APIC at: 0xFEE00000 Processor #0 15:5 APIC version 16 Processor #1 15:5 APIC version 16 I/O APIC #2 Version 17 at 0xFEC00000. I/O APIC #3 Version 17 at 0xFEBFE000. I/O APIC #4 Version 17 at 0xFEBFF000. Processors: 2 Built 1 zonelists Kernel command line: root=/dev/md0 nousb console=tty0 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 1.193182 MHz PIT timer. time.c: Detected 1793.890 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 1026520k/1048576k available (1809k kernel code, 21300k reserved, 664k data, 176k init) Calibrating delay loop... 3522.56 BogoMIPS (lpj=1761280) Mount-cache hash table entries: 256 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) Using local APIC NMI watchdog using perfctr0 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU0: AMD Opteron(tm) Processor 244 stepping 08 per-CPU timeslice cutoff: 1024.01 usecs. task migration cache decay timeout: 2 msecs. Booting processor 1/1 rip 6000 rsp 10037f25f58 Initializing CPU#1 Calibrating delay loop... 3579.90 BogoMIPS (lpj=1789952) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) AMD Opteron(tm) Processor 244 stepping 08 Total of 2 processors activated (7102.46 BogoMIPS). Using IO-APIC 2 Using IO-APIC 3 Using IO-APIC 4 Using local APIC timer interrupts. Detected 12.457 MHz APIC timer. checking TSC synchronization across 2 CPUs: passed. time.c: Using PIT/TSC based timekeeping. Brought up 2 CPUs checking if image is initramfs... it is NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router default [1022/746b] at 0000:00:07.3 PCI->APIC IRQ transform: (B0,I7,P3) -> 19 PCI->APIC IRQ transform: (B3,I0,P3) -> 19 PCI->APIC IRQ transform: (B3,I0,P3) -> 19 PCI->APIC IRQ transform: (B3,I6,P0) -> 18 PCI->APIC IRQ transform: (B2,I9,P0) -> 24 PCI->APIC IRQ transform: (B2,I9,P1) -> 25 PCI->APIC IRQ transform: (B2,I10,P0) -> 24 PCI->APIC IRQ transform: (B2,I10,P1) -> 25 PCI->APIC IRQ transform: (B1,I3,P0) -> 28 Real Time Clock Driver v1.12 hw_random: AMD768 system management I/O registers at 0x5000. hw_random hardware driver 1.0.0 loaded serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD8111: IDE controller at PCI slot 0000:00:07.1 AMD8111: chipset revision 3 AMD8111: not 100% native mode: will probe irqs later AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: GCR-8523B, ATAPI CD/DVD-ROM drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: ATAPI 52X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 Fusion MPT base driver 3.01.16 Copyright (c) 1999-2004 LSI Logic Corporation mptbase: Initiating ioc0 bringup ioc0: 53C1030: Capabilities={Initiator} mptbase: Initiating ioc1 bringup ioc1: 53C1030: Capabilities={Initiator} Fusion MPT SCSI Host driver 3.01.16 scsi0 : ioc0: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=24 Vendor: MAXTOR Model: ATLAS10K4_36SCA Rev: DFV0 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sda: 71833096 512-byte hdwr sectors (36779 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: MAXTOR Model: ATLAS10K4_36SCA Rev: DFV0 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sdb: 71833096 512-byte hdwr sectors (36779 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 scsi1 : ioc1: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=25 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 md: raid1 personality registered as nr 3 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 u32 classifier NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 64Kbytes TCP: Hash tables configured (established 131072 bind 65536) ip_tables: (C) 2000-2002 Netfilter core team NET: Registered protocol family 1 NET: Registered protocol family 17 Bridge firewalling registered Freeing unused kernel memory: 176k freed md: Autodetecting RAID arrays. md: autorun ... md: considering sdb2 ... md: adding sdb2 ... md: sdb1 has different UUID to sdb2 md: adding sda2 ... md: sda1 has different UUID to sdb2 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ReiserFS: md0: found reiserfs format "3.6" with standard journal ReiserFS: md0: using ordered data mode ReiserFS: md0: journal params: device md0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: md0: checking transaction log (md0) ReiserFS: md0: Using r5 hash to sort names Adding 1052152k swap on /dev/md1. Priority:-1 extents:1