From: Mark Lord <liml@rtr.ca>
To: David Greaves <david@dgreaves.com>
Cc: Tejun Heo <htejun@gmail.com>, Jeff Garzik <jgarzik@pobox.com>,
Justin Piszcz <jpiszcz@lucidpixels.com>,
linux-kernel@vger.kernel.org,
IDE/ATA development list <linux-ide@vger.kernel.org>,
albertcc@tw.ibm.com, axboe@suse.de,
Linus Torvalds <torvalds@osdl.org>
Subject: Re: LibPATA code issues / 2.6.15.4
Date: Tue, 28 Feb 2006 09:37:07 -0500 [thread overview]
Message-ID: <44046013.7070503@rtr.ca> (raw)
In-Reply-To: <44042863.2050703@dgreaves.com>
David Greaves wrote:
>
> /dev/sda:
..
> 0040 3fff c837 0010 0000 0000 003f 0000
> 0000 0000 4234 3033 3852 5248 2020 2020
> 2020 2020 2020 2020 0003 4000 0004 4241
> 4e43 3139 3830 4d61 7874 6f72 2036 4232
> 3030 4d30 2020 2020 2020 2020 2020 2020
> 2020 2020 2020 2020 2020 2020 2020 8010
> 0000 2f00 4000 0200 0000 0007 3fff 0010
> 003f fc10 00fb 0100 ffff 0fff 0000 0007
> 0003 0078 0078 0078 0078 0000 0000 0000
> 0000 0000 0000 0000 0002 0000 0000 0000
> 00fe 001e 7869 7d09 4043 7869 3c01 4043
> 203f 0000 0000 0000 0000 0000 0000 0000
> 0000 0000 0000 0000 f1b0 1749 0000 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 0000 0000 0000 0000 0000 0000 0113 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 0000 0000 0000 0000 0000 0000 0000 d3a5
..
hdparm-6.4 says:
Model Number: Maxtor 6B200M0
Serial Number: B4038RRH
Firmware Revision: BANC1980
Commands/features:
Enabled Supported:
* NOP cmd
* READ BUFFER cmd
* WRITE BUFFER cmd
* Look-ahead
* Write cache
* Power Management feature set
* SMART feature set
* FLUSH_CACHE_EXT
* Mandatory FLUSH_CACHE
* Device Configuration Overlay feature set
* 48-bit Address feature set
SET_MAX security extension
Advanced Power Management feature set
* DOWNLOAD_MICROCODE
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* SMART self-test
* SMART error logging
So, yes, the drive is either lying about "* WRITE_{DMA|MULTIPLE}_FUA_EXT",
or it didn't like the parameters it was given, or the SATA/IDE controller
chip didn't like the command.
Cheers
next prev parent reply other threads:[~2006-02-28 14:37 UTC|newest]
Thread overview: 167+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-14 9:48 LibPATA code issues / 2.6.15.4 Justin Piszcz
2006-02-14 14:50 ` Mark Lord
2006-02-14 16:27 ` David Greaves
2006-02-14 17:12 ` Justin Piszcz
2006-02-14 18:00 ` Mark Lord
2006-02-14 18:06 ` Justin Piszcz
2006-02-23 23:39 ` Justin Piszcz
2006-02-25 15:32 ` Mark Lord
2006-02-25 15:58 ` Justin Piszcz
2006-02-25 16:11 ` Jesper Juhl
2006-02-25 16:21 ` Mark Lord
2006-02-25 11:34 ` David Greaves
2006-02-25 16:20 ` Mark Lord
2006-02-25 17:45 ` Justin Piszcz
2006-02-25 18:28 ` Mark Lord
2006-02-25 18:55 ` Justin Piszcz
2006-02-25 19:29 ` Justin Piszcz
2006-02-25 19:53 ` David Greaves
2006-02-25 19:47 ` David Greaves
2006-02-26 2:27 ` Mark Lord
2006-02-26 9:56 ` David Greaves
2006-02-26 14:04 ` Mark Lord
2006-02-27 21:34 ` Mark Lord
2006-02-28 1:33 ` Tejun Heo
2006-02-28 1:46 ` Linus Torvalds
2006-02-28 2:07 ` Jeff Garzik
2006-02-28 2:14 ` Linus Torvalds
2006-02-28 2:52 ` Jeff Garzik
2006-02-28 3:36 ` Jeff Garzik
2006-02-28 4:11 ` Mark Lord
2006-02-28 10:30 ` Alan Cox
2006-02-28 8:03 ` Jens Axboe
2006-02-28 4:16 ` Mark Lord
2006-02-28 10:32 ` Alan Cox
2006-02-28 10:30 ` Justin Piszcz
2006-02-28 10:39 ` David Greaves
2006-02-28 14:37 ` Mark Lord [this message]
2006-02-28 21:04 ` Bill Davidsen
2006-03-08 2:57 ` Mark Lord
2006-03-08 3:18 ` Dave Jones
2006-03-08 3:23 ` Mark Lord
2006-03-08 15:37 ` Bill Davidsen
2006-03-08 15:37 ` Bill Davidsen
2006-02-28 14:38 ` Mark Lord
[not found] ` <Pine.LNX.4.64.0602280939280.16541@p34>
2006-02-28 14:49 ` Mark Lord
2006-02-28 15:07 ` Jeff Garzik
2006-02-28 15:26 ` Mark Lord
2006-02-28 15:33 ` Jeff Garzik
2006-03-01 0:46 ` Mark Lord
2006-03-01 6:01 ` Jeff Garzik
2006-02-28 15:16 ` Alan Cox
2006-03-01 17:33 ` David Greaves
2006-03-01 18:37 ` Alan Cox
2006-03-01 20:12 ` Phillip Susi
2006-03-08 16:46 ` Alan Cox
2006-02-28 15:31 ` Mark Lord
2006-02-28 15:34 ` Jeff Garzik
2006-02-28 16:57 ` Eric D. Mudama
2006-03-01 1:04 ` Mark Lord
2006-03-01 11:37 ` Justin Piszcz
2006-03-01 13:17 ` Justin Piszcz
2006-03-01 17:41 ` David Greaves
2006-03-01 17:46 ` Mark Lord
2006-03-01 18:12 ` David Greaves
2006-03-01 18:30 ` Mark Lord
2006-03-01 18:32 ` Justin Piszcz
2006-03-01 18:33 ` Justin Piszcz
2006-03-01 18:48 ` David Greaves
2006-03-01 19:49 ` David Greaves
2006-03-03 19:38 ` Justin Piszcz
2006-03-03 22:46 ` David Greaves
2006-03-04 14:25 ` Mark Lord
2006-03-06 6:13 ` David Greaves
2006-03-21 18:11 ` David Greaves
2006-03-22 15:23 ` David Greaves
2006-03-05 11:43 ` Justin Piszcz
2006-03-05 12:41 ` Justin Piszcz
2006-03-05 22:58 ` Mark Lord
2006-03-05 23:00 ` Mark Lord
2006-03-05 23:19 ` Justin Piszcz
2006-03-05 23:39 ` Jeff Garzik
2006-04-21 19:14 ` LibPATA code issues / 2.6.16 (previously, 2.6.15.x) Justin Piszcz
2006-04-21 19:18 ` Jeff Garzik
2006-04-21 19:18 ` Jeff Garzik
2006-04-21 19:28 ` Linus Torvalds
2006-04-21 22:46 ` Jeff Garzik
2006-04-21 22:46 ` Jeff Garzik
2006-04-22 0:05 ` Linus Torvalds
2006-05-06 15:09 ` [smartmontools-support]Re: " Leon Woestenberg
2006-05-07 12:44 ` Ingo Oeser
2006-06-11 11:13 ` Justin Piszcz
2006-04-22 16:39 ` Justin Piszcz
2006-03-01 19:06 ` LibPATA code issues / 2.6.15.4 Justin Piszcz
2006-03-01 19:28 ` Mark Lord
2006-03-01 19:35 ` Mark Lord
2006-03-01 19:38 ` Justin Piszcz
2006-03-01 19:41 ` Jeff Garzik
2006-02-26 12:27 ` James Courtier-Dutton
2006-02-26 12:55 ` David Greaves
2006-02-26 13:56 ` Mark Lord
2006-02-26 14:30 ` Kernel SeekCompleteErrors... Different from " James Courtier-Dutton
2006-02-26 17:03 ` Mark Lord
2006-02-26 17:13 ` Dr. David Alan Gilbert
2006-02-26 17:43 ` Alan Cox
2006-02-26 20:36 ` Mark Lord
2006-02-27 11:48 ` Alan Cox
2006-02-27 13:40 ` Mark Lord
2006-02-14 23:58 ` Justin Piszcz
2006-02-17 8:45 ` Jeff Garzik
2006-02-17 14:59 ` Mark Lord
2006-02-17 15:00 ` Justin Piszcz
2006-02-18 20:43 ` Sander
2006-02-18 21:42 ` Mark Lord
2006-02-18 21:51 ` Justin Piszcz
2006-02-19 7:14 ` Sander
2006-02-19 15:30 ` Mark Lord
2006-02-19 17:16 ` Sander
2006-07-06 23:08 ` Justin Piszcz
2006-07-07 13:08 ` Mark Lord
2006-07-07 13:24 ` Justin Piszcz
2006-07-07 13:43 ` Mark Lord
2006-07-07 13:48 ` Justin Piszcz
2006-07-07 14:01 ` Justin Piszcz
2006-07-07 14:35 ` Justin Piszcz
2006-07-07 18:53 ` Justin Piszcz
2006-07-07 19:19 ` Jeff Garzik
2006-07-07 19:28 ` Justin Piszcz
[not found] ` <200607091224.31451.liml@rtr.ca>
2006-07-09 17:27 ` Justin Piszcz
2006-07-09 20:16 ` Justin Piszcz
2006-07-09 20:40 ` LibPATA code issues / 2.6.15.4 (found the opcode=0x35)! Justin Piszcz
2006-07-09 20:46 ` Justin Piszcz
2006-07-09 21:05 ` Justin Piszcz
2006-07-09 22:03 ` Justin Piszcz
2006-07-10 13:59 ` Follow up? " Justin Piszcz
2006-07-10 15:33 ` Alan Cox
2006-07-10 15:45 ` Justin Piszcz
2006-07-11 13:28 ` LibPATA code issues / 2.6.17.3 (What is the next step?) Justin Piszcz
2006-07-11 16:12 ` Alan Cox
2006-07-12 22:10 ` David Greaves
2006-07-12 22:29 ` Justin Piszcz
2006-07-14 15:33 ` David Greaves
2006-07-13 10:55 ` Erik Mouw
2006-07-14 17:16 ` Mark Lord
2006-07-14 17:18 ` Justin Piszcz
2006-07-14 17:39 ` Mark Lord
2006-07-14 18:18 ` Justin Piszcz
2006-07-14 20:02 ` Mark Lord
2006-07-14 17:14 ` Follow up? LibPATA code issues / 2.6.15.4 (found the opcode=0x35)! Mark Lord
2006-07-14 17:17 ` Justin Piszcz
2006-07-14 17:37 ` Mark Lord
2006-07-14 18:17 ` Justin Piszcz
-- strict thread matches above, loose matches on Subject: below --
2006-03-01 19:00 LibPATA code issues / 2.6.15.4 Nicolas Mailhot
2006-03-01 19:22 ` Mark Lord
2006-03-01 23:12 ` Nicolas Mailhot
2006-03-01 23:31 ` Jeff Garzik
2006-03-02 1:19 ` Eric D. Mudama
2006-03-02 1:39 ` Eric D. Mudama
2006-03-14 13:50 me_trash1
2006-03-15 15:03 ` Mark Lord
2006-03-16 10:08 ` Jens Axboe
2006-03-17 5:26 ` Mark Lord
2006-03-17 9:26 ` Albert Lee
2006-03-17 9:57 ` Jeff Garzik
2006-03-17 15:20 ` Eric D. Mudama
2006-03-17 15:20 ` Mark Lord
2006-03-17 15:29 ` Tejun Heo
2006-03-16 0:19 ` markus ebenhoeh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44046013.7070503@rtr.ca \
--to=liml@rtr.ca \
--cc=albertcc@tw.ibm.com \
--cc=axboe@suse.de \
--cc=david@dgreaves.com \
--cc=htejun@gmail.com \
--cc=jgarzik@pobox.com \
--cc=jpiszcz@lucidpixels.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.