From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <440587C8.8090406@domain.hid> Date: Wed, 01 Mar 2006 12:38:48 +0100 From: Philippe Gerum MIME-Version: 1.0 Subject: Re: AW: [Xenomai-core] vxworks-skin taskSpawn References: <5D63919D95F87E4D9D34FF7748CE2C2A1C3C4F@ARVMAIL1.mra.roland-man.biz> In-Reply-To: <5D63919D95F87E4D9D34FF7748CE2C2A1C3C4F@ARVMAIL1.mra.roland-man.biz> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable List-Id: "Xenomai life and development \(bug reports, patches, discussions\)" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Roderik_Wildenburg@domain.hid Cc: xenomai@xenomai.org Roderik_Wildenburg@domain.hid wrote: > Dear Gilles, >=20 > perhaps I should have mentioned in my earlier postings that I am using = a PowerPC platform. I hope this does not nullify your prior analyses. > As the following output shows, my timer is running in onshot mode : >=20 > ~ # cat /proc/xenomai/timer > status=3Doneshot:setup=3D40:tickval=3D1:jiffies=3D940509634545=20 >=20 > so, the prerequisites for uvm module should be correct !? > Is the default timing something I can influence with the vxWorks-API ? = In the examples satch.c and koan.c I can=B4t see any function call referi= ng to timer mode manipulation. >=20 I've run the satch example successfully on an Icecube board here using -r= c2.=20 What's the status of this issue on your side? Was it a timer configuratio= n issue=20 as suspected by Gilles? > Best regards=20 > Roderik >=20 >=20 >>This looks like a configuration issue: I get a similar=20 >>behaviour when configuring periodic timing by default and=20 >>loading the native module before the uvm module. The uvm skin=20 >>needs aperiodic timing. >> >>The UVM skin should refuse to start with an error instead of=20 >>starting with the wrong timer. I am trying to fix this. >> >>--=20 >> >> >> Gilles Chanteperdrix. >> >=20 >=20 > _______________________________________________ > Xenomai-core mailing list > Xenomai-core@domain.hid > https://mail.gna.org/listinfo/xenomai-core >=20 --=20 Philippe.