Re: Daily Xen-HVM Builds: cs9186

[Rick Gonzalez <rcgneo@us.ibm.com>]

Dan Smith wrote:

>RG> I should be including that in the daily reports. I'll do that from
>RG> now on. :)
>
>Yes, that would be helpful.
>
>RG> Attached is the *.output file from this run.
>
>It would be most helpful to just have the relevant parts.  There is no
>need to spam the list with lots of success messages :)
>
>RG> [dom0] Running `xm create /tmp/xm-test.conf'
>RG> Using config file "/tmp/xm-test.conf".
>RG> Error: Device 768 (vbd) could not be connected.
>RG> File /usr/xen/xen-unstable.hg/tools/xm-test/ramdisk/disk.img is loopback-mounted through /dev/loop0,
>RG> which is mounted in a guest domain,
>RG> and so cannot be mounted now.
>RG> Failed to create domain
>
>Hmm, this seems to be the source of all of the "Failed to create
>domain" messages.
>
>Are you running anything else on the box while the tests are running?
>If you are doing something else that attaches the disk.img to loop0
>while running the test, then the tests are going to fail.
>  
>
I am not running anything else while xm-test is running.

>If not, can you send the output of the following command after a run?
>
>  xenstore-list /local/domain/0/backend/vbd
>  
>
I will get this information soon.

>That will tell us if something is getting stuck in the store and
>erroneously preventing you from starting another domain with the same
>image.  I think this is the most likely scenario, as it let you create
>all the domains up until about test 11_create.
>
>Thanks!
>
>  
>