Re: Au1550/1200: add missing PSC #define's and make OSS drivers use the proper ones

[Sergei Shtylylov <sshtylyov@ru.mvista.com>]

[-- Attachment #1: Type: text/plain, Size: 894 bytes --]

Hello.

   Forgot the darn signoff line, reporting... :-(

Jordan Crouse wrote:

> Looks good to me as a quick glance.  I'll trust that Sergei got the addresses
> right, so..

      Well, they weren't right but that wasn't my fault. :-)
      I guess nobody tried using I2S driver on Au1550 so far -- if they did, it
wouldn't work because the PSC3 address #define was initially wrong.

> Acked-by: Jordan Crouse <jordan.crouse@amd.com>
> 
> On 13/03/06 21:03 +0300, Sergei Shtylylov wrote:
> 
>>Hello.
>>
>>    Add missing PSC #define's required for the drivers using PSC on DBAu1550
>>board and all Au1200-based boards as well.

      Now I've copied Au1200 part from 2.4 tree where this have been already 
fixed.

>>Make OSS drivers use the correct PSC definitions fo each board.

      And fix PSC3 address for Au1550.

WBR, Sergei

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>


[-- Attachment #2: Au1550-Au1200-PSC-defs.patch --]
[-- Type: text/plain, Size: 2672 bytes --]

diff --git a/include/asm-mips/mach-au1x00/au1xxx_psc.h b/include/asm-mips/mach-au1x00/au1xxx_psc.h
index 8e5fb3c..faa5ffe 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_psc.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_psc.h
@@ -40,7 +40,12 @@
 #define PSC0_BASE_ADDR		0xb1a00000
 #define PSC1_BASE_ADDR		0xb1b00000
 #define PSC2_BASE_ADDR		0xb0a00000
-#define PSC3_BASE_ADDR		0xb0d00000
+#define PSC3_BASE_ADDR		0xb0b00000
+#endif
+
+#ifdef CONFIG_SOC_AU1200
+#define PSC0_BASE_ADDR		0xb1a00000
+#define PSC1_BASE_ADDR		0xb1b00000
 #endif
 
 /* The PSC select and control registers are common to
@@ -228,6 +233,8 @@ typedef struct	psc_i2s {
 #define PSC_I2SCFG_DD_DISABLE	(1 << 27)
 #define PSC_I2SCFG_DE_ENABLE	(1 << 26)
 #define PSC_I2SCFG_SET_WS(x)	(((((x) / 2) - 1) & 0x7f) << 16)
+#define PSC_I2SCFG_WS(n)	((n & 0xFF) << 16)
+#define PSC_I2SCFG_WS_MASK	(PSC_I2SCFG_WS(0x3F))
 #define PSC_I2SCFG_WI		(1 << 15)
 
 #define PSC_I2SCFG_DIV_MASK	(3 << 13)
diff --git a/include/asm-mips/mach-db1x00/db1x00.h b/include/asm-mips/mach-db1x00/db1x00.h
index 7b28b23..4bbfcaf 100644
--- a/include/asm-mips/mach-db1x00/db1x00.h
+++ b/include/asm-mips/mach-db1x00/db1x00.h
@@ -31,8 +31,20 @@
 #include <linux/config.h>
 
 #ifdef CONFIG_MIPS_DB1550
+
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN  DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN  DSCR_CMD0_PSC3_RX
+
+#define SPI_PSC_BASE       PSC0_BASE_ADDR
+#define AC97_PSC_BASE      PSC1_BASE_ADDR
+#define SMBUS_PSC_BASE     PSC2_BASE_ADDR
+#define I2S_PSC_BASE       PSC3_BASE_ADDR
+
 #define BCSR_KSEG1_ADDR 0xAF000000
 #define NAND_PHYS_ADDR  0x20000000
+
 #else
 #define BCSR_KSEG1_ADDR 0xAE000000
 #endif
diff --git a/sound/oss/au1550_ac97.c b/sound/oss/au1550_ac97.c
index 64e2e46..fd40962 100644
--- a/sound/oss/au1550_ac97.c
+++ b/sound/oss/au1550_ac97.c
@@ -55,10 +55,9 @@
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <asm/hardirq.h>
-#include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_psc.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
-#include <asm/mach-pb1x00/pb1550.h>
+#include <asm/mach-au1x00/au1xxx.h>
 
 #undef OSS_DOCUMENTED_MIXER_SEMANTICS
 
diff --git a/sound/oss/au1550_i2s.c b/sound/oss/au1550_i2s.c
index 529b625..8addad2 100644
--- a/sound/oss/au1550_i2s.c
+++ b/sound/oss/au1550_i2s.c
@@ -63,10 +63,9 @@
 #include <asm/uaccess.h>
 #include <asm/hardirq.h>
 
-#include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_psc.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
-#include <asm/mach-pb1x00/pb1550.h>
+#include <asm/mach-au1x00/au1xxx.h>
 
 #undef OSS_DOCUMENTED_MIXER_SEMANTICS