From: harald.dunkel@t-online.de (Harald Dunkel)
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] 2.6.16-rc5: unreasonable temperature reported by
Date: Sat, 18 Mar 2006 05:14:47 +0000 [thread overview]
Message-ID: <441B9747.3020408@t-online.de> (raw)
In-Reply-To: <44144A01.2050207@t-online.de>
Hi Jean,
Sorry for the late response. See below.
Jean Delvare wrote:
> Hallo Harald,
>
>
> I don't see the version of lm_sensors in your second report, I'll
> assume 2.10.0.
>
Yes, it is.
> I'm surprised that the thermal sensor types changed from "diode" to
> "thermistor". These settings are not supposed to change on their own.
> Did you change anything in your configuration file? It probably doesn't
> matter much here, as these inputs seem to be unused, but I'm curious.
>
No, I did not change this file. Currently sensors replies "diode"
again.
> The output of sensors-detect is interesting:
>
>
>>Next adapter: SMBus I801 adapter at 5000
>>(...)
>>Client found at address 0x2d
>
> (All Failed)
>
>>Client found at address 0x2f
>
> (All Failed)
>
> These are typical addresses for hardware monitoring chips, so I start
> suspecting that one of these is your real fans + temperatures sensor
> chip, either a recent or rare type which we don't know about yet.
>
> Please provide the output of the following commands (which will dump the
> contents of these chips for further analysis) as root:
>
> modprobe i2c-dev
> i2cdump 0 0x2d b
> i2cdump 0 0x2f b
>
No problem, see below. Please mail if more information is needed.
Many thanx in advance
Harri
=====================================
{root at bugs:harri 1001} modprobe i2c-dev
{root at bugs:harri 1001} i2cdump 0 0x2d b
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0, address 0x2d, mode byte
Continue? [Y/n]
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 01 07 00 40 5a ff ff ff ff ff ff ff ff ff ff ff ??. at Z...........
10: c5 72 7e 85 25 22 01 df 0f fe 00 00 1c 80 ad 07 ?r~?%"????..????
20: ff 00 ff 00 ff 00 ff 00 4b 4b 4b 4b 3c 37 00 ff ........KKKK<7..
30: 00 b0 b0 00 00 00 30 ff ff ff ff ff ff ff ff ff .??...0.........
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
50: ff ff ff ff ff ff ff ff ff ff 04 10 20 19 34 ff ..........?? ?4.
60: bb 0a 90 00 01 00 00 0f ff 55 64 46 64 46 ff ff ???.?..?.UdFdF..
70: 02 ab ff ff 00 00 ff ff ff ff ff ff ff ff ff ff ??..............
80: 0f ff ff ff 00 00 ff ff ff ff ff ff ff ff ff ff ?...............
90: 00 00 0d ff ff ff ff ff ff ff ff ff ff ff ff ff ..?.............
a0: 46 3c 32 28 ff d9 b2 99 80 ff ff ff ff ff ff ff F<2(.????.......
b0: 46 3c 32 28 ff d9 b2 99 80 ff ff ff ff ff ff ff F<2(.????.......
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
f0: 00 00 00 00 00 00 39 38 01 45 00 ff ff ff ff 27 ......98?E.....'
{root at bugs:harri 1002} i2cdump 0 0x2f b
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0, address 0x2f, mode byte
Continue? [Y/n]
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: ff 03 07 f0 22 08 ff ff ff ff ff ff ff ff ff ff .???"?..........
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
50: ff ff ff ff ff ff ff ff ff ff 03 02 12 19 34 ff ..........????4.
60: ff ff ff ff ff ff ff ff ff ff a0 a0 ff ff ff ff ..........??....
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
f0: 00 80 ff ff ff ff ff ff ff ff ff ff ff ff ff 5e .?.............^
{root at bugs:harri 1003} sensors
w83627thf-isa-0290
Adapter: ISA adapter
VCore: +1.37 V (min = +1.94 V, max = +1.94 V) ALARM
+12V: +12.22 V (min = +10.82 V, max = +13.19 V)
+3.3V: +3.18 V (min = +3.14 V, max = +3.47 V)
+5V: +4.91 V (min = +4.75 V, max = +5.25 V)
-12V: -12.11 V (min = -13.18 V, max = -10.80 V)
V5SB: +5.05 V (min = +4.76 V, max = +5.24 V)
VBat: +3.09 V (min = +2.40 V, max = +3.60 V)
fan1: 0 RPM (min = 664 RPM, div = 8) ALARM
CPU Fan: 0 RPM (min = 664 RPM, div = 8) ALARM
fan3: 0 RPM (min = 664 RPM, div = 8) ALARM
M/B Temp: +6 C (high = -87 C, hyst = +125 C) sensor = diode
CPU Temp: -7.5 C (high = +80 C, hyst = +75 C) sensor = diode
temp3: +7.5 C (high = +80 C, hyst = +75 C) sensor = diode (beep)
alarms:
beep_enable:
Sound alarm enabled
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 258 bytes
Desc: OpenPGP digital signature
Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20060318/05a8f955/signature.bin
next prev parent reply other threads:[~2006-03-18 5:14 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-12 16:19 [lm-sensors] 2.6.16-rc5: unreasonable temperature reported by Harald Dunkel
2006-03-12 16:40 ` Jean Delvare
2006-03-12 18:32 ` Harald Dunkel
2006-03-13 9:31 ` Jean Delvare
2006-03-18 5:14 ` Harald Dunkel [this message]
2006-03-26 9:43 ` Harald Dunkel
2006-03-31 12:35 ` Jean Delvare
2006-04-01 5:44 ` Harald Dunkel
2006-04-01 12:48 ` Jean Delvare
2006-04-01 13:59 ` Harald Dunkel
2006-04-04 18:07 ` Harald Dunkel
2006-04-04 19:49 ` Jean Delvare
2006-04-04 19:59 ` Jean Delvare
-- strict thread matches above, loose matches on Subject: below --
2006-05-19 16:24 Harald Dunkel
2006-05-20 9:03 ` Jean Delvare
2006-05-26 10:46 ` Harald Dunkel
2006-05-26 12:10 ` Jean Delvare
2006-05-26 19:02 ` Harald Dunkel
2006-05-28 17:24 ` Harald Dunkel
2006-06-10 7:33 ` Harald Dunkel
2006-08-19 9:39 ` Rudolf Marek
2006-08-20 5:50 ` Harald Dunkel
2006-08-20 10:44 ` Rudolf Marek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=441B9747.3020408@t-online.de \
--to=harald.dunkel@t-online.de \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.