From: "Alexander E. Patrakov" <patrakov@ums.usu.ru>
To: Jan Engelhardt <jengelh@linux01.gwdg.de>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
torvalds@osdl.org
Subject: Re: [PATCH] Fix console utf8 composing (F)
Date: Tue, 21 Mar 2006 08:56:18 +0500 [thread overview]
Message-ID: <441F7962.9080803@ums.usu.ru> (raw)
In-Reply-To: <Pine.LNX.4.61.0603202048350.14231@yvahk01.tjqt.qr>
Jan Engelhardt wrote:
> Hello Alexander, Linus, LKML,
>
>
>
> can we have the patch[2] from this[1] thread merged? I have not yet heard back
> from Alexander since [3]. Plus we're lacking a Signed-off-by so far for [2].
> What to do?
>
>
> [1] http://lkml.org/lkml/2005/12/25/2
> [2] http://www.linuxfromscratch.org/~alexander/patches/linux-2.6.14-utf8_input-1.patch
> [3] http://lkml.org/lkml/2006/1/30/50
>
>
> Jan Engelhardt
>
See the updated (in fact, just rediffed after "patch -Np1 -l") patch
below. You certainly want to run Lindent after patching.
It includes the following patches from
http://chris.heathens.co.nz/linux/utf8.html: p1_conv_8bit_to_uni.patch,
p2_selection.patch, p3_extended_utf8.patch. The third patch may be
useful only for things like fbiterm, I will remove it if there are
objections.
Submitted by: Alexander E. Patrakov <patrakov@ums.usu.ru>
Signed-off-by: Alexander E. Patrakov <patrakov@ums.usu.ru>
Date: 2006-03-21
Initial Package Version: 2.6.15-rc6
Origin: http://chris.heathens.co.nz/linux/downloads/patches-2.6.4-cdh1.tar.gz
Porting to linux-2.6.16 by Alexander E. Patrakov
Description: This patch fixes dead keys and copy/paste of non-ASCII characters
in UTF-8 mode on Linux console.
See more details about the original patch at:
http://chris.heathens.co.nz/linux/utf8.html
diff -ur linux-2.6.15-rc6.orig/drivers/char/consolemap.c linux-2.6.15-rc6.my/drivers/char/consolemap.c
--- linux-2.6.15-rc6.orig/drivers/char/consolemap.c 2005-12-25 10:00:12.000000000 +0500
+++ linux-2.6.15-rc6.my/drivers/char/consolemap.c 2005-12-25 10:01:22.000000000 +0500
@@ -178,6 +178,7 @@
unsigned long refcount;
unsigned long sum;
unsigned char *inverse_translations[4];
+ u16 *inverse_trans_unicode;
int readonly;
};
@@ -208,6 +209,41 @@
}
}
+static void set_inverse_trans_unicode(struct vc_data *conp,
+ struct uni_pagedir *p)
+{
+ int i, j, k, glyph;
+ u16 **p1, *p2;
+ u16 *q;
+
+ if (!p) return;
+ q = p->inverse_trans_unicode;
+ if (!q) {
+ q = p->inverse_trans_unicode =
+ kmalloc(MAX_GLYPH * sizeof(u16), GFP_KERNEL);
+ if (!q)
+ return;
+ }
+ memset(q, 0, MAX_GLYPH * sizeof(u16));
+
+ for (i = 0; i < 32; i++) {
+ p1 = p->uni_pgdir[i];
+ if (!p1)
+ continue;
+ for (j = 0; j < 32; j++) {
+ p2 = p1[j];
+ if (!p2)
+ continue;
+ for (k = 0; k < 64; k++) {
+ glyph = p2[k];
+ if (glyph >= 0 && glyph < MAX_GLYPH
+ && q[glyph] < 32)
+ q[glyph] = (i << 11) + (j << 6) + k;
+ }
+ }
+ }
+}
+
unsigned short *set_translate(int m, struct vc_data *vc)
{
inv_translate[vc->vc_num] = m;
@@ -218,19 +254,29 @@
* Inverse translation is impossible for several reasons:
* 1. The font<->character maps are not 1-1.
* 2. The text may have been written while a different translation map
- * was active, or using Unicode.
+ * was active.
* Still, it is now possible to a certain extent to cut and paste non-ASCII.
*/
-unsigned char inverse_translate(struct vc_data *conp, int glyph)
+u16 inverse_translate(struct vc_data *conp, int glyph, int use_unicode)
{
struct uni_pagedir *p;
+ int m;
if (glyph < 0 || glyph >= MAX_GLYPH)
return 0;
- else if (!(p = (struct uni_pagedir *)*conp->vc_uni_pagedir_loc) ||
- !p->inverse_translations[inv_translate[conp->vc_num]])
+ else if (!(p = (struct uni_pagedir *)*conp->vc_uni_pagedir_loc))
return glyph;
- else
- return p->inverse_translations[inv_translate[conp->vc_num]][glyph];
+ else if (use_unicode) {
+ if (!p->inverse_trans_unicode)
+ return glyph;
+ else
+ return p->inverse_trans_unicode[glyph];
+ } else {
+ m = inv_translate[conp->vc_num];
+ if (!p->inverse_translations[m])
+ return glyph;
+ else
+ return p->inverse_translations[m][glyph];
+ }
}
static void update_user_maps(void)
@@ -244,6 +290,7 @@
p = (struct uni_pagedir *)*vc_cons[i].d->vc_uni_pagedir_loc;
if (p && p != q) {
set_inverse_transl(vc_cons[i].d, p, USER_MAP);
+ set_inverse_trans_unicode(vc_cons[i].d, p);
q = p;
}
}
@@ -354,6 +401,10 @@
kfree(p->inverse_translations[i]);
p->inverse_translations[i] = NULL;
}
+ if (p->inverse_trans_unicode) {
+ kfree(p->inverse_trans_unicode);
+ p->inverse_trans_unicode = NULL;
+ }
}
void con_free_unimap(struct vc_data *vc)
@@ -512,6 +563,7 @@
for (i = 0; i <= 3; i++)
set_inverse_transl(vc, p, i); /* Update all inverse translations */
+ set_inverse_trans_unicode(vc, p);
return err;
}
@@ -562,6 +614,7 @@
for (i = 0; i <= 3; i++)
set_inverse_transl(vc, p, i); /* Update all inverse translations */
+ set_inverse_trans_unicode(vc, p);
dflt = p;
return err;
}
@@ -618,6 +671,19 @@
p->readonly = rdonly;
}
+/* may be called during an interrupt */
+u32 conv_8bit_to_uni(unsigned char c)
+{
+ /*
+ * Always use USER_MAP. This function is used by the keyboard,
+ * which shouldn't be affected by G0/G1 switching, etc.
+ * If the user map still contains default values, i.e. the
+ * direct-to-font mapping, then assume user is using Latin1.
+ */
+ unsigned short uni = translations[USER_MAP][c];
+ return uni == (0xf000 | c) ? c : uni;
+}
+
int
conv_uni_to_pc(struct vc_data *conp, long ucs)
{
diff -ur linux-2.6.15-rc6.orig/drivers/char/keyboard.c linux-2.6.15-rc6.my/drivers/char/keyboard.c
--- linux-2.6.15-rc6.orig/drivers/char/keyboard.c 2005-12-25 10:00:12.000000000 +0500
+++ linux-2.6.15-rc6.my/drivers/char/keyboard.c 2005-12-25 10:01:22.000000000 +0500
@@ -34,6 +34,7 @@
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/consolemap.h>
#include <linux/kbd_kern.h>
#include <linux/kbd_diacr.h>
#include <linux/vt_kern.h>
@@ -329,10 +330,9 @@
* Many other routines do put_queue, but I think either
* they produce ASCII, or they produce some user-assigned
* string, and in both cases we might assume that it is
- * in utf-8 already. UTF-8 is defined for words of up to 31 bits,
- * but we need only 16 bits here
+ * in utf-8 already.
*/
-static void to_utf8(struct vc_data *vc, ushort c)
+static void to_utf8(struct vc_data *vc, uint c)
{
if (c < 0x80)
/* 0******* */
@@ -341,14 +341,33 @@
/* 110***** 10****** */
put_queue(vc, 0xc0 | (c >> 6));
put_queue(vc, 0x80 | (c & 0x3f));
- } else {
+ } else if (c < 0x10000) {
+ if (c >= 0xD800 && c < 0xE000)
+ return;
+ if (c == 0xFFFF)
+ return;
/* 1110**** 10****** 10****** */
put_queue(vc, 0xe0 | (c >> 12));
put_queue(vc, 0x80 | ((c >> 6) & 0x3f));
put_queue(vc, 0x80 | (c & 0x3f));
+ } else if (c < 0x110000) {
+ /* 11110*** 10****** 10****** 10****** */
+ put_queue(vc, 0xf0 | (c >> 18));
+ put_queue(vc, 0x80 | ((c >> 12) & 0x3f));
+ put_queue(vc, 0x80 | ((c >> 6) & 0x3f));
+ put_queue(vc, 0x80 | (c & 0x3f));
}
}
+static void put_8bit(struct vc_data *vc, u8 c)
+{
+ if (kbd->kbdmode != VC_UNICODE || c < 32 || c == 127)
+ /* Don't translate control chars */
+ put_queue(vc, c);
+ else
+ to_utf8(vc, conv_8bit_to_uni(c));
+}
+
/*
* Called after returning from RAW mode or when changing consoles - recompute
* shift_down[] and shift_state from key_down[] maybe called when keymap is
@@ -409,7 +428,7 @@
if (ch == ' ' || ch == d)
return d;
- put_queue(vc, d);
+ put_8bit(vc, d);
return ch;
}
@@ -419,7 +438,7 @@
static void fn_enter(struct vc_data *vc, struct pt_regs *regs)
{
if (diacr) {
- put_queue(vc, diacr);
+ put_8bit(vc, diacr);
diacr = 0;
}
put_queue(vc, 13);
@@ -628,7 +647,7 @@
diacr = value;
return;
}
- put_queue(vc, value);
+ put_8bit(vc, value);
}
/*
@@ -774,7 +793,7 @@
/* kludge */
if (up_flag && shift_state != old_state && npadch != -1) {
if (kbd->kbdmode == VC_UNICODE)
- to_utf8(vc, npadch & 0xffff);
+ to_utf8(vc, npadch);
else
put_queue(vc, npadch & 0xff);
npadch = -1;
diff -ur linux-2.6.15-rc6.orig/drivers/char/selection.c linux-2.6.15-rc6.my/drivers/char/selection.c
--- linux-2.6.15-rc6.orig/drivers/char/selection.c 2005-12-25 10:00:12.000000000 +0500
+++ linux-2.6.15-rc6.my/drivers/char/selection.c 2005-12-25 10:01:22.000000000 +0500
@@ -20,6 +20,7 @@
#include <asm/uaccess.h>
+#include <linux/kbd_kern.h>
#include <linux/vt_kern.h>
#include <linux/consolemap.h>
#include <linux/selection.h>
@@ -34,6 +35,7 @@
/* Variables for selection control. */
/* Use a dynamic buffer, instead of static (Dec 1994) */
struct vc_data *sel_cons; /* must not be disallocated */
+static int use_unicode;
static volatile int sel_start = -1; /* cleared by clear_selection */
static int sel_end;
static int sel_buffer_lth;
@@ -54,10 +56,11 @@
complement_pos(sel_cons, where);
}
-static unsigned char
+static u16
sel_pos(int n)
{
- return inverse_translate(sel_cons, screen_glyph(sel_cons, n));
+ return inverse_translate(sel_cons, screen_glyph(sel_cons, n),
+ use_unicode);
}
/* remove the current selection highlight, if any,
@@ -86,8 +89,8 @@
0xFF7FFFFF /* latin-1 accented letters, not division sign */
};
-static inline int inword(const unsigned char c) {
- return ( inwordLut[c>>5] >> (c & 0x1F) ) & 1;
+static inline int inword(const u16 c) {
+ return c > 0xff || (( inwordLut[c>>5] >> (c & 0x1F) ) & 1);
}
/* set inwordLut contents. Invoked by ioctl(). */
@@ -108,13 +111,36 @@
return (v > u) ? u : v;
}
+/* stores the char in UTF8 and returns the number of bytes used (1-3) */
+int store_utf8(u16 c, char *p)
+{
+ if (c < 0x80) {
+ /* 0******* */
+ p[0] = c;
+ return 1;
+ } else if (c < 0x800) {
+ /* 110***** 10****** */
+ p[0] = 0xc0 | (c >> 6);
+ p[1] = 0x80 | (c & 0x3f);
+ return 2;
+ } else {
+ /* 1110**** 10****** 10****** */
+ p[0] = 0xe0 | (c >> 12);
+ p[1] = 0x80 | ((c >> 6) & 0x3f);
+ p[2] = 0x80 | (c & 0x3f);
+ return 3;
+ }
+}
+
/* set the current selection. Invoked by ioctl() or by kernel code. */
int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *tty)
{
struct vc_data *vc = vc_cons[fg_console].d;
int sel_mode, new_sel_start, new_sel_end, spc;
char *bp, *obp;
- int i, ps, pe;
+ int i, ps, pe, multiplier;
+ u16 c;
+ struct kbd_struct *kbd = kbd_table + fg_console;
poke_blanked_console();
@@ -158,7 +184,8 @@
clear_selection();
sel_cons = vc_cons[fg_console].d;
}
-
+ use_unicode = kbd && kbd->kbdmode == VC_UNICODE;
+
switch (sel_mode)
{
case TIOCL_SELCHAR: /* character-by-character selection */
@@ -240,7 +267,8 @@
sel_end = new_sel_end;
/* Allocate a new buffer before freeing the old one ... */
- bp = kmalloc((sel_end-sel_start)/2+1, GFP_KERNEL);
+ multiplier = use_unicode ? 3 : 1; /* chars can take up to 3 bytes */
+ bp = kmalloc((sel_end-sel_start)/2*multiplier+1, GFP_KERNEL);
if (!bp) {
printk(KERN_WARNING "selection: kmalloc() failed\n");
clear_selection();
@@ -251,8 +279,12 @@
obp = bp;
for (i = sel_start; i <= sel_end; i += 2) {
- *bp = sel_pos(i);
- if (!isspace(*bp++))
+ c = sel_pos(i);
+ if (use_unicode)
+ bp += store_utf8(c, bp);
+ else
+ *bp++ = c;
+ if (!isspace(c))
obp = bp;
if (! ((i + 2) % vc->vc_size_row)) {
/* strip trailing blanks from line and add newline,
diff -ur linux-2.6.15-rc6.orig/include/linux/consolemap.h linux-2.6.15-rc6.my/include/linux/consolemap.h
--- linux-2.6.15-rc6.orig/include/linux/consolemap.h 2005-12-25 10:00:13.000000000 +0500
+++ linux-2.6.15-rc6.my/include/linux/consolemap.h 2005-12-25 10:01:22.000000000 +0500
@@ -10,6 +10,7 @@
struct vc_data;
-extern unsigned char inverse_translate(struct vc_data *conp, int glyph);
+extern u16 inverse_translate(struct vc_data *conp, int glyph, int use_unicode);
extern unsigned short *set_translate(int m, struct vc_data *vc);
extern int conv_uni_to_pc(struct vc_data *conp, long ucs);
+extern u32 conv_8bit_to_uni(unsigned char c);
--
Alexander E. Patrakov
next prev parent reply other threads:[~2006-03-21 3:56 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-20 19:54 [PATCH] Fix console utf8 composing (F) Jan Engelhardt
2006-03-20 20:05 ` DervishD
2006-03-20 21:04 ` Jan Engelhardt
2006-03-21 10:30 ` DervishD
2006-03-20 23:19 ` J.A. Magallon
2006-03-21 17:28 ` Jan Engelhardt
2006-03-21 3:56 ` Alexander E. Patrakov [this message]
2006-03-22 15:56 ` Jan Engelhardt
2006-03-25 18:32 ` Jan Engelhardt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=441F7962.9080803@ums.usu.ru \
--to=patrakov@ums.usu.ru \
--cc=jengelh@linux01.gwdg.de \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.